Deano

I can't sleep there are aftershocks

My advice is start with a good M20B25. Best bang for buck is 2.8L stroker. Its straight forward to build and its on wiki but more difficult to extract the maximum power without correct tuning. You can throw it all together with stock cam and ECU exhaust etc and you will have a very nice engine with good low power but kinda flat in the higher rpms but still faster than stock BUT THE TORQUE! I can't sleep and we are having aftershocks

Koni adjustables for the rear and have the spring platform lowered 40mm and shock shaft cut the same. You can run the standard springs and set the shocks to med damping rate. Slot the trailing arm mounting points if your are concerned with the squat camber. This is the best set up I have tried and the E21 rear is an issue. You can buy all urethane bushes from the US or pour your own. The rear subframe carrier is soft as and with some hard Urethane poured in there makes quite a bit of difference. Shift the battery to the boot, make or buy a rear strut brace and battery holder..good to get as much weight back there as poss. The front is 323i struts as these are 45mm from memory and I run heavy duty KYB inserts with compressed King springs and this works well. 323i 23.5mm sway bar - there are 2 types of sway bar that match two types of control arms early and late. You can weld in bracing between the chasis rails at the front to stiffen it and a decent strut brace will help. I cast Urethane bushes for the control arms where the sway bar fits through and I purchased the sway bar bushes from Stocks. A decent set of 15 inch rims with correct offset (quite hard to find) and I have Kuhmo 205 50s. Probably want a power rack with the wider rubber ( rare as but they are around). Brakes..volvo 1980s 740 4 pots fit pretty easily and E30 rear calipers and discs are nearly bolt on. Handles and brakes good, sits about 50mm lower than stock, no rattles and best of all no shimmy at around 100! Good luck and get ready to spend some dosh and search the net for bits

http://www.trademe.co.nz/Browse/Listing.aspx?id=355150503 Nice purchase, I was going to bid on this but we had other stuff going here in Chch. Worth way more than the price it went for but E21s are cheap here. Does anyone know Nick from Welly who purchased?? May have some bits and pieces for it.

Hi Anyone have all the black plastic in behind the bumper, inner guards, brake ducting etc Cash or swap for something I may have E21,E30, E36 Cheers Dean

Found some..

Doing a ellipsoidal smiley conversion on an E21 and need a Bosch right or left headlight. Must be a Bosch with good glass but clips can be broken as will be trimmed up to fit the steel headlight frame. Anyone with a spare lying around? PM if you have one Cheers

I might have some of those as I stripped and M30 3.5 lately and from memory had some hoses on it..got some pictures of what you need?

Hi..looking for E36 heater valve..cash or swap for E30, E21 or E36 parts

Where are you located..I have a mint rear bumper if you are in Chch..

I thought that hose should go to the top of the rad?

Bump..or Sth Island..

Needs to have the black plastic strip and the top part of the bumper intact, everything below the strip is not a concern. Cheers

Probably got the lot except the engine loom

Looking for twin in twin out rear muffler in good nick, possibly the complete exhaust system. Have lots of E30 parts to swap or cash. Cheers

I have a couple of mint front guards if you are still looking?

Sorry sold that one and was real tidy..advertised a few times here on bimmersport. The guy who bought it is a BMW guru who is repowering with a BMW V8 no s..t!

I have a spare untampered with $50..4 pin 082 for 1.3 version

Pm'ed

Bump

Bump

Mate.. if you are looking for an E21 this is it!!..I have family in Wellytown, need to see that lot I could drive it up???

How the f@#$ did I miss that???