Deano

True..

On a house I hope not a BM!!

Do you reckon or are you being sarky?

This one has to go also. Very tidy and original 323i. 240000ks, 5 speed. Reg on hold, will put WOF and rego on. Engine runs well, no smoke but has piston slap from cold. Mint as 5 speed from 1982 E21 I wrecked a while back. Interior is nearly perfect. Small amount of rust in the usual spots but this would have to be one of the tidiest original E21s around. Some bog in the rear guard has fallen out and there are a few other body areas needing a tidy up. Good rubber and overall the paint is very good and original. Viewing a must! http://www.trademe.co.nz/Browse/Listing.as...171&ed=true Gave it a clean and put on some 14s now offered to the world!!

As circumstances have changed my just finished project has got to go. This is a nice little car with lots of good bits Goes great http://www.trademe.co.nz/Browse/Listing.aspx?id=341199887

Hi..I think I have a clutch and flywheel some where, cheers

To find a mint M20 cam will be difficult. They are notorious for wearing cam lobes when the miles get up.I have a pretty decent E21 320/6 cam which is has enough meat on it to re-grind to M20 profile. Last time I was researching cams I had quite a few measured at Kelford here in chch and they reckon they were identical including 325i, 320i, 323i and E21 etc etc. This was discussed in depth by a few of us on E30tech a year ago looking for the elusive 260 degree duration E21/ E30 323i cam..its a myth..apparently I have that cam if you need it..$80 Kelford will check it for you for $20 and a grind was $100 last year..

Hi..I have sent ECUs to the USA, its not very expensive so to Indo won't be much. How has the surf been over there??Send me a PM if you are interested in the ECU..cheers

There is one for sale here: http://www.trademe.co.nz/Browse/Listing.aspx?id=338804546

Don't think they are they correct ones 323i has thicker sway bar measure it and if they are the ones I will take a pair..

Thanks..I thought the ECU had no part to play in control of the vanos as its works on oil pressure?I will see if the guy still wants to go ahead and install it..

I sold the engine fully disclosed it was non-vanos, sent it to Invercargill and the buyer turns round and says his car is Vanos and wants to return it...so looking for options

A 1993 E36 320i non-ews engine with a cracked head. A non-vanos engine should still work as a replacement provided all the electrical components on the engine are swapped over. Should be able to run the original management as the vanos works on oil pressure so just leave the power feed disconnected?

I will probably have one somewhere do you know the length exactly?

I'm selling some standard 5 series wheels http://www.trademe.co.nz/Browse/Listing.aspx?id=336411416

Thanks, will give them a call

Hi..anyone recommend a place in Chch to have some E30 Sterling Silber matched up. Got a damaged front guard. Had paint matched before and was not a very good match so looking for options Cheers

As the title says and needs to be straight as. Only the Christchurch area. Thought I would throw it out there before I panelbeat and paint the one I have..

Hi..looking for the piece of loom that plugs into the yellow socket on the back of the gauge cluster and has a green plug for the OBC..plus a few other connectors. Looking to retro fit OBC into my 1990 E30 320i Cheers jpg

PMed

Where abouts are you located?

Looking for 2 BBS center caps from 15x6 wheels

Pervious..thats funny

I have a set from a E36 320i if your keen but they have excellent tyres so will be $240 for the set. 0212304284

Left or right side fog light. Must be in WOF condition. I may have items to swap?