hunter

How much for a pristine example of an air vent please, Brent?

True that. I do have a recent after market HU, I took the car back to the installer yesterday and they had a look. They confirmed that the bits that are busted they dont touch when installing. So I'm nine the wiser as to who and when, but have just now managed to get a full center dash bracket out of a local parts car for 20 bucks. Getting a decent 2nd hand air vent might be a bit more of a challenge. Seems any part that has people contact is marked or marred in some fashion.

Cheers man, I'm looking at some bits tonight here - will update

I'm in the market for a center aircon vent and upper instrument panel bracket, Part 2 https://www.realoem.com/bmw/enUS/showparts?id=AN16-EUR-09-2001-E46-BMW-320i&diagId=51_3233 if anyone is wrecking....

removed dash trim to inspect rattles discover all screw points are cracked or completely broken (these are the rattles) in the cd player, central aircon vent and other fixing points behind the trim / fascia. Anyone else experienced this type of bracket mass malfunction? possibly age? Needless to say, I am now in the market for a center vent and upper instrument panel bracket, if anyone is wrecking....

What does a conversion like this cost? @BM WORLD imagine there is a quite a bit to change over in a 318i / 320i to handle the M engine.

E46 washed and waxed on weekend, looking pretty, nice and shiny. Cat jumps on it tonight and slides off putting scratches don the front guard, little prick!? Thankfully i've got plans to get the car to auto Niche here in hams in the new years for a full paint correction.

suspension malarkey month for me; each winter for the past 3 winters the car had been making an intermittent groan when turning the wheel at either low speed or stationary. this year it became more persistent, and after much investigation and checking of bushings control arms etc, it was found that the H&R front springs i had, had sagged / compressed past the point of being useful and the car was effectively sitting on the bumps stops (although compression under driving didn't provide any noise the bumps were under constant stress) and that is what the groaning was. This was disappointing as i loved the set up and "stance" of the car and the springs weren't that old, 5 years, and cost a bit. So i agreed with the local suspension shop to swap my OG M Sport springs back in, this worked but the rears were on the piss with different heights from left to right (see post in suspension section) this would not do - front were great and car felt much better when turning. ( i also noted that the shop and put a huge gouge in one of my wheels when it was with them - grrr they did agree to put it right and have since done so ) That was all 2 weeks ago, so this week we swapped the H&R rears back in, the car is now level left to right and has a slight rake front to rear as factory. the spring rates although different springs front to rear are very complimentary and the car driving feel is better than it's felt in a long time. So now all sorted, no odd noises, no crooked looks, no bung mags. Now she just needs a solid clean one my garage project is done and she can be parked inside again

E46 sedan arm rest wanted, black leather(?) arm rest top piece only preferred. the retaining "hoops" on mine have snapped, rest of part is fine. Cheers Ben

Its approx 20 - 25 mm out. Little but noticeable once seen I cant unsee it. So frustrating.

I've just had my oem msport springs put back in my e46, replacing my h&r springs and the passenger side is sitting higher than driver side. Shop reckons it's ok from an install pov that its level and well aligned. The car drives really nice(prefer the feel of oem spring) but looks odd. Any other e46 owners, mechanics etc out there seen this before? Car hasn't had this issue before when springs where in there previously and has koni yellow shocks so is not likely a bung shock issue. Cheers Ben

if i didn't have a garage / Laundry & workshop expansion renno project, a baby number 2 on the go..... lovely example, GLWS

nice little article on SpeedHunters on this rather insane F80 M3 engine & drive line refit http://www.speedhunters.com/2018/10/f80-x-e30-modern-m3-tech-meets-classic-m3-chassis/

New oil and other fluids for the 320i, also a fresh wheel alignment. I need to detail the interior, it's dusty...

After 3days of trying, finally got my key re coded to the car (E46) after replacing buttons in the key fob. It just would not register for some reason, then tonight, boom! central locking is back.

https://www.bilgalleri.dk/galleri/billeder/bmw-e30-330d-touring---m-tech-2---brownie/214991

150000 kms young today

? 2jz Powered E30 M3 hill climb lots of power, lots of skids, up a hill

What seats are you running with this set up, race buckets full time or switching back to the recaros?

either or, depends on what im doing. i'm more proficient on the Weber Family Q than Weber kettle. got a home made in ground fire pit too, but that's marshmallow territory so doesn't realy count :)

How's this going, Brent. really like the prospect of a conversion like this, once the kids are out of car seats

M1 pro car ? from this years Goodwood

I do at lest 3 these days, used to be 7 night a week until, new job and baby / toddler. meas the mrs is at home more and we tend to eat earlier now. On weekend it's all me, especially when the BBQ needs deploying. Personally i love it and it counts as "me" time. very relaxing

Had my MF Wheel project completed this week. Wheel swap and cruise control had been in for about 4 weeks...this week i got a new Alpine mechless media player installed and Audio controls wired up by Mad Soundz here in hamilton. They did a great job and after some fiddling the Bavsound speakers have really come alive with the Alpine unit. It's great have bluetooth audio and phone (with Mic) too.

Out of boredom, i was Looking at some cold air intakes for for my e46 320i. wondering if any one has done one & noticed any difference in performance / induction sound. eg https://afepower.com/afe-power-54-20442-magnum-force-stage-2-pro-5r-cold-air-intake-system#reviews