Gus

here is the template i made my carbon airbox out of. works well, for facelift needs a little alteration to clear the coolant reservoir. works well, i added a top panel to seal it better. actually made a difference from stock airbox with K&N panel. many thanks to the guy on R3V who made this up

sorry david...its gone! might hold onto the diff actually unless someone really wants it. sister might need!

MHW..what box you using with m50? what ratio you looking for?

5! nice!

nope open so every e30 series car has a 4.1? cmon people!

bump definately for sale, with fresh fluid!

nope...its real

sounds like door sensors take em out and put the ones from ya old car in...else just try tidy em up with sandpaper sometimes that works

sure is big fulla the godfather has it now

holy sh*t thats awesome...i should stay at home in front of the mirror more often

dog and lemon guide is rubbish. written by fools, for fools

e28 struts dont work...the bolt pattern at the bottom is different. even if you did use them you would have to buy the e30 m3 part to connect the strut to the control arm and tie rod end. sounds easy but they retail at ~$500 each. have had much conversation with glenn about this! 15" Weaves fit fine over andys wilwoods. could always use a wilwood disc but one of the attraction of the e38 caliper is that it will have dust seals unlike the wilwoods. they are really light...lighter than stock e30 stuff. not heavy like e28 etc stuff

nicely done what does an sr20 weigh? i was reading somewhere around 140kg..seems a little heavy?

has anyone done this? after doing the brakes on my mums 7 i observed they are very similar to andy's wilwoods. alloy body, 4 piston. good in other words now say i could get hold of a set...making adaptors to fit them to an e3o would be similar to the wilwood ones?

anyone had a problem with this? swapped new rear brakes today and my rear disc was cracked in two places..not bad enough yet but glad i changed it now. had a wobble when the handbrake was used since i had the car, so wasn't me doing it...what might have caused it? handbrake up whilst the brakes were hot?

its so so so bad and filmed in my hood

i prefer having the same tint all round...it looks funny when its different. i really like mine..came on the car and dunno what they actually are but its not too dark.

Badass TePapa Auckland. Where is it? Somewhere next to our street race circuit?

summary. sparkle=fag.

nope sorry, is going in my sisters e30

more rev happy that what you got now? i wouldnt recommend it..you sure you doing 3500 at 110? have a look on the back of the diff...there should be a little tag there thats probably dirty so clean it off and tell us what numbers you got there.

sure will fit not sure about revs at 110...i never go that fast haha i have not had it in my car...maybe a little bit lower? yours sounds like a 4.27 or something around there...3.91 fuel economy!

not sure if we been through this before but has anyone done this on the e30? any other options other than turner?

which looks like a piece of sh*t and is just a modifed stock one sorry...dont see any relevance whatsoever? gone

what silver is that? i like.. hmm..polishing..doesnt sound that bad. haha