misgvous_1 0 Report post Posted May 19, 2008 I'm a graphic designer based in a small company in Bucklands Beach. Mainly working in the print area but slowly branching into the web & multimedia areas. No company car, just cruise to and from work in the 328 Quote Share this post Link to post Share on other sites
E30 325i Rag-Top 2957 Report post Posted May 19, 2008 Factory Manager for a medium sized company making plastic mouldings for the low volume car industry. No dedicated company car, but can pick from the firms fleet of near WoF-failures if I need a vehicle for the week-end or evening. Also get to 'borrow' vehicles that we are working on from dealers or manufacturers which can provide some enjoyment....still trying to get a BMW project though. Company car from my previous job was a BA MkII Falcon - what a barge! Quote Share this post Link to post Share on other sites
elmarco 56 Report post Posted May 19, 2008 Factory Manager for a medium sized company making plastic mouldings for the low volume car industry. Not Quest Industries is it? Quote Share this post Link to post Share on other sites
oldskool 4 Report post Posted May 19, 2008 Guys, It would appear that we have all grown up and got serious in the last 24 hrs. I'm actually in real estate, and when we had a large concern in Akl I used to have a 3.0d X5, and not just for work chores and when no one else was using it. It was and still is one of the best vehicles I have ever had and beleive me that is saying something, I seem to have inherited my fathers gene of changing cars like underpants so I've had a few. Will be looking to pick up a 4.4 for my partner prior to the baby arriving as she won't do a touring, and will most likely chop in some of my less practical newer bemers for a kited or m/s e39 523 - 525, the e34 530 is lovely and has the right bells and whisles but is getting a bit long in the tooth for everyday work. Have to that so long as its a well cared for bemer its usually a pleasure, will use the e3 with the full webasto roof in summer down here, will be a blast.............. Just think of all the fun we could have if work didnt get in the way.................LOL Quote Share this post Link to post Share on other sites
E30 325i Rag-Top 2957 Report post Posted May 19, 2008 Not Quest Industries is it?Could be, why do you ask? Quote Share this post Link to post Share on other sites
elmarco 56 Report post Posted May 19, 2008 Guess I should come clean too... I'm a engineering project manager normally involved in product development (spent 7 years in the european auto industry). Currently project managing an ERP (IT) system selection and implementation. Declined the Datsun Insult offered by the company, and got myself the 330ci. Quote Share this post Link to post Share on other sites
elmarco 56 Report post Posted May 19, 2008 Could be, why do you ask? Worked with Robert on a couple of spoiler CHMSL projects (in a former life).... Quote Share this post Link to post Share on other sites
Silver Fox 43 Report post Posted May 19, 2008 Self employed for most of my life, can't imagine working for someone again. Fabricate and install Aluminium composite panel on commercial Buildings. Everyday drive's an Isuzu Elf 250, site meetings etc. get to take the E28 M535i. Quote Share this post Link to post Share on other sites
E30 325i Rag-Top 2957 Report post Posted May 19, 2008 Worked with Robert on a couple of spoiler CHMSL projects (in a former life)....Clunk... penny drops, I think we worked together on some TRD stuff quite recently.Small world, but I wouldn't like to paint it! How's the new job going? Just out of curiosity which ERP system? Is that as as consultant or eventual user? Quote Share this post Link to post Share on other sites
M325is 0 Report post Posted May 19, 2008 Fabricate and install Aluminium composite panel on commercial Buildings. ACM IS THE SHIZZLE!! Quote Share this post Link to post Share on other sites
*sic 1 Report post Posted May 19, 2008 Deal drugs, well thats how i always got introduced to people owner of 021 2 GET NOS - now ceased due to laws. previously worked in genetics researching faster ways to obtain viable genetic material for fast analysis. based on the research we dropped the time from 3-5 hours and an error rate of 10-15% to 15 minutes and an error rate of >2%, before moving into technical claims managment in Melbourne. no company cars for me. my job is 5 minutes walk from my apartment in the CBD. Quote Share this post Link to post Share on other sites
elmarco 56 Report post Posted May 19, 2008 Clunk... penny drops, I think we worked together on some TRD stuff quite recently. Small world, but I wouldn't like to paint it! How's the new job going? Just out of curiosity which ERP system? Is that as as consultant or eventual user? PM'd Quote Share this post Link to post Share on other sites
Gus 5 Report post Posted May 19, 2008 Sales Account Manager working in Life Sciences for TransPerfect, a large US based translation company over here in the UK. Company is 3rd largest translation co. in the world and is largest privately owned. No need for a company car - its a 20 min walk away from my flat. Interesting, fast and keeps me busy, so I can't complain! Quote Share this post Link to post Share on other sites
hotwire 352 Report post Posted May 19, 2008 Auto Sparky - & for a long time. Apart from a stint overseas & another as a sales rep, after each, have ventured back to roots. A trade where theres always something to learn. Is both satisfying & frustrating. Company drive - good old 93 Nissan Terrano - handy for the race car too! Quote Share this post Link to post Share on other sites
Foohey 0 Report post Posted May 19, 2008 Sigh... after reading all of your jobs, mine is so gay lol... im a freezer boy lol... i drive a forklift in -30 deg freezers for 8 hours a day... not too bad though, ive been there 10 months and only had 2 deadly amonia leaks so far Quote Share this post Link to post Share on other sites
Silver Fox 43 Report post Posted May 19, 2008 ACM IS THE SHIZZLE!!Yeah, do a bit of signage. Nice stuff to work with, very clean. Quote Share this post Link to post Share on other sites
*Glenn* 854 Report post Posted May 19, 2008 For the newbies I'm director of Attract Signs. My company car is my 87 M325i, when I need to tow or lug signs about I have a 97 Mazda B2200 Cabplus. Ive tooted to a few bimmersport members now while out in the ute, people don't know why I'm tooting... now you do Check out our website which Ollie made for us www.attractsigns.co.nz Shelly's work is absolutely awesome... she did the graphics on my car and has just completed doing our plinth signage work on the road frontage outside our workshop. Absolutely a terrific job and is already attracting people to the workshop. She did the plinth on Saturday and yesterday we got 4 inquiries from people who saw our sign. I'll post up a picture later today. Great work Shelly Glenn .... a very happy customer BTW..Ollie did our website too.... another awesome job Quote Share this post Link to post Share on other sites
Andrew 30 Report post Posted May 19, 2008 Shelly's work is absolutely awesome... she did the graphics on my car and has just completed doing our plinth signage work on the road frontage outside our workshop. Absolutely a terrific job and is already attracting people to the workshop. She did the plinth on Saturday and yesterday we got 4 inquiries from people who saw our sign. I'll post up a picture later today. Great work Shelly Glenn .... a very happy customer BTW..Ollie did our website too.... another awesome job x 2 Shelley did a great job on the bimmersport race cars also. Quote Share this post Link to post Share on other sites
M325is 0 Report post Posted May 19, 2008 Wow guys thanks a lot!!! I do take pride in my work Quote Share this post Link to post Share on other sites
steve R 0 Report post Posted May 20, 2008 Shelly's work is absolutely awesome... she did the graphics on my car and has just completed doing our plinth signage work on the road frontage outside our workshop. Absolutely a terrific job and is already attracting people to the workshop. She did the plinth on Saturday and yesterday we got 4 inquiries from people who saw our sign. I'll post up a picture later today. Great work Shelly Glenn .... a very happy customer BTW..Ollie did our website too.... another awesome job i noticed that when i came in today. real eye catcher Quote Share this post Link to post Share on other sites
Gaz 1061 Report post Posted May 20, 2008 Well I was ASM of Spags Pizza restaurant here in Christchurch until the start of the year, now Im doing a pre-trade course in electrical engineering at polytech and on the hunt for an apprenticeship. So if anyone knows someone who needs an apprentice...... Quote Share this post Link to post Share on other sites
westy 614 Report post Posted May 20, 2008 Fabricate and install Aluminium composite panel on commercial Buildings. I did a stint installing these a while ago. Worked on the recladding of the then Bellsouth building in the city. Its a good product, I rate it. Quote Share this post Link to post Share on other sites
PBOY23 0 Report post Posted May 20, 2008 I did a stint installing these a while ago. Worked on the recladding of the then Bellsouth building in the city. Its a good product, I rate it. yeh we use the same sort of thing at work alco panels they are good look good but scratch easy wasnt the belsouth building by that shell and floras massage lol Quote Share this post Link to post Share on other sites
Silver Fox 43 Report post Posted May 20, 2008 I did a stint installing these a while ago. Worked on the recladding of the then Bellsouth building in the city. Its a good product, I rate it. Are you talking about the old ARC/ Vodafone reclad at the motorway ramp top of Hobson? My company did the install on that, about 12 to 15 years ago I guess. Did it out of swinging stages. Quote Share this post Link to post Share on other sites
Katalyst 0 Report post Posted May 20, 2008 (edited) I run a business making custom composite parts for the marine industry, specializing in carbon sail batten technology and carbon fibre tube. supply all americas cup, volvo and many other world racing boats aswell as any yacht from 40ft upto well ... as big as you want! just wished I owned one!! well that was before i heard the average annual maintenance bill plans of makng car parts in my spare time, but dont seem to have much of that Edited May 20, 2008 by Katalyst Quote Share this post Link to post Share on other sites
