Etwenty1 45 Report post Posted December 17, 2014 Does anyone have an engine crane i can borrow ? must be suitable for bmw V8. Needed in Tauranga but happy to drive an hour or so to collect and return, can pay in beers cash whatever. Quote Share this post Link to post Share on other sites
_ethrty-Andy_ 2132 Report post Posted December 17, 2014 Does anyone have an engine crane i can borrow ? must be suitable for bmw V8. Needed in Tauranga but happy to drive an hour or so to collect and return, can pay in beers cash whatever. come for a drive to sunny Wellington Quote Share this post Link to post Share on other sites
BMTHUG 1057 Report post Posted December 17, 2014 Anyone in auckland have a guard rolling tool I can borrow?willing to pay or swap/fit tyres for free or alcohol or whatever to borrow this Quote Share this post Link to post Share on other sites
BMTHUG 1057 Report post Posted December 17, 2014 Oh can also scan and reset fault codes for someone with a guard rolling tool for free Quote Share this post Link to post Share on other sites
thorburn 121 Report post Posted December 17, 2014 Does anyone have an engine crane i can borrow ? must be suitable for bmw V8. Needed in Tauranga but happy to drive an hour or so to collect and return, can pay in beers cash whatever. I've got one in Hamilton, pm me if keen Quote Share this post Link to post Share on other sites
Etwenty1 45 Report post Posted December 18, 2014 I've got one in Hamilton, pm me if keen Hi yes keen but your message box is full Quote Share this post Link to post Share on other sites
actletpone 43 Report post Posted December 18, 2014 Hi yes keen but your message box is full Mate hired one from hire pool, was fairly large and sat on its own little trailer to tow behind the car. Think it cost about $50 for the day. Might be an option. Quote Share this post Link to post Share on other sites
francoisv 466 Report post Posted December 18, 2014 I have a pipe / tube bender available in Auckland. Quote Share this post Link to post Share on other sites
thorburn 121 Report post Posted December 19, 2014 what type of tube bender? Quote Share this post Link to post Share on other sites
francoisv 466 Report post Posted December 19, 2014 what type of tube bender? Manual 12Ton hydrollc Quote Share this post Link to post Share on other sites
BMTHUG 1057 Report post Posted December 19, 2014 Manual 12Ton hydrollc I needs to buy one of these Quote Share this post Link to post Share on other sites
Tidy30 38 Report post Posted December 19, 2014 Wanting to do my rear brake pads in the E30. .........somehow I need a 7mm Allen key! Where can I buy this unicorn tool? Quote Share this post Link to post Share on other sites
Ahmedsinc 414 Report post Posted December 20, 2014 (edited) Does anyone have the camshaft alignment tools for the M52TU / M54? Edit: Don't need the lock blocks, just the gadgets to get both cams back to 0* Edited December 20, 2014 by Ahmedsinc Quote Share this post Link to post Share on other sites
sti-ted 0 Report post Posted December 28, 2014 I have a car trailer, I'm in wellys especially suited for lowered cars..double axle monster fits my lowered e39 and lowered e30 no probs .if you don't have a vehicle to tow it ,I've got one of those too...lol Quote Share this post Link to post Share on other sites
earon 32 Report post Posted January 10, 2015 Hi guys, Would anyone in the Auckland region have a fan clutch removal tool (E46 M3) I could hire? I've already bought quite a bit of bmw tooling however certain weather issues in the states have delayed my postage and I'd like to have my project going along on schedule. Thanks Picture attached if reference needed. Quote Share this post Link to post Share on other sites
Allanw 1071 Report post Posted January 10, 2015 Hi guys, Would anyone in the Auckland region have a fan clutch removal tool (E46 M3) I could hire? I've already bought quite a bit of bmw tooling however certain weather issues in the states have delayed my postage and I'd like to have my project going along on schedule. Thanks Picture attached if reference needed. I've never needed one. I did however need one for the crank pulley on Dads E30 - took about 10 minutes with a drill and grinder to shape a piece of strap from the scrap bin. A local engineering shop, or steel merchant will probably have the metal you need either in the scrap bin, or offcut bin - for free, or for a donation to the beer fund. Quote Share this post Link to post Share on other sites
earon 32 Report post Posted January 11, 2015 ^ 32mm spanner and mallet. It'll be off in 60 seconds.Yeah I was trying to avoid that route with just the 32mm wrench and hammer and ensure I've got that holding tool on the water pump pulley but looks like I'll have to go there now. Quote Share this post Link to post Share on other sites
earon 32 Report post Posted January 11, 2015 I also wanted to avoid that method the first time I tried but my hand was forced and I've wondered why I bothered ever since. Thanks for the advice Dave, appreciate it! By the way I'm a fan of your E36 M3 (I'm normally not a E36 fan, but your car is always quite the standout!) 1 Quote Share this post Link to post Share on other sites
earon 32 Report post Posted January 17, 2015 You'll laugh at this... Now I need one! My belt is not holding the pump so the sledge method is not working (I've sprayed it with penetrating oil in the meantime). Did you find one in the end? Anyone in Auckland (preferably the 'Shore) have one? Ahaha! Just bad luck mate.. no I couldn't bring myself to swing that hammer! Haha I'll have one in 3 days time, been busy all week caving so didn't get around to it..have a few other things I can do on the car without having to pull the fan out so will continue on that till holding tool arrives. I could pass it onto you when I'm done?if that'll help you out? Quote Share this post Link to post Share on other sites
handgrenade 189 Report post Posted January 19, 2015 Appreciate Earons compliment Dave. Really. Just take a moment and savour it Quote Share this post Link to post Share on other sites
qube 3570 Report post Posted February 3, 2015 please dont kill me for this but does anyone have a scanner for my w211 e350 mercedes? or know anyone who can lend/drop by my place to borrow.. need to scan for fault codes, car is dead. sigh... i MUST get back into a bmw Quote Share this post Link to post Share on other sites
duvey 245 Report post Posted February 27, 2015 After an engine crane on the North Shore to use over the weekend. Can pay in beersies. Can anyone help me out? Thanks :D:D:D Quote Share this post Link to post Share on other sites
Bazza5er 3 Report post Posted April 8, 2015 I have a guard roller in the Taranaki area for anyone who would like to borrow it. Quote Share this post Link to post Share on other sites
zero 1162 Report post Posted April 17, 2015 Wanted to hire; Cam timing tool for N46 motor. Cams need to come off to do valve stem seals, and then a tool is used to realign them. Anyone have one? Can pay cash or beers Quote Share this post Link to post Share on other sites
Etwenty1 45 Report post Posted April 22, 2015 Wanted to hire please; 1. M30 water pump pulley holder - fan nut is rusted and stuck 2. Guard roller In Hamilton tomorrow if that helps. Quote Share this post Link to post Share on other sites
