GorGasm 563 Report post Posted June 9, 2020 You can road tune 1 Quote Share this post Link to post Share on other sites
scottharvey 60 Report post Posted June 10, 2020 Here’s a photo of the strut brace 3 Quote Share this post Link to post Share on other sites
Jacko 2156 Report post Posted June 10, 2020 (edited) Personally I wouldnt bother with out of the box generic tunes, particularly ones with extraordinary claims like 211kw... if it sounds too good to be true, it probably is. The "dynographs" on his website ring alarm bells too, MS paint is not dyno software Put the money towards a LSD/maintenance/etc. If you want more power in the future, get a proper dyno tune with things to make use of it (like MILVs/headers/etc) But, its also not my money, and I wanna see what the results are Edited June 10, 2020 by Jacko 1 Quote Share this post Link to post Share on other sites
scottharvey 60 Report post Posted June 10, 2020 3 minutes ago, Jacko said: But, its also not my money, and I wanna see what the results are I will still get it done anyway they have a decent guarantee so if it dont work out ill just get my money back. Plus the money im spending is from the 635 sale anyway so its all free anyway. 1 Quote Share this post Link to post Share on other sites
scottharvey 60 Report post Posted June 10, 2020 So just worked it out the exhaust and strut brace brand new round up to about $3500 NZD 1 Quote Share this post Link to post Share on other sites
M3AN 4016 Report post Posted June 10, 2020 3 hours ago, scottharvey said: So just worked it out the exhaust and strut brace brand new round up to about $3500 NZD Although that would be a rip-off it's good to know. A bit like my exhaust... just not economical to build but some people do it anyway! or any BMWP part lol. Quote Share this post Link to post Share on other sites
scottharvey 60 Report post Posted June 15, 2020 Ok so tune is good just need to get it tweaked as the tune for 98 fuel is pinging under load. Im on the hunt for some wheels im going to look at some bbs rx 502 later today 18x8.5 Quote Share this post Link to post Share on other sites
qube 3570 Report post Posted June 15, 2020 2 hours ago, scottharvey said: Ok so tune is good just need to get it tweaked as the tune for 98 fuel is pinging under load. Im on the hunt for some wheels im going to look at some bbs rx 502 later today 18x8.5 Its going to be a bit of a struggle to get ET22 to fit on the E87.. typically they like offsets around 40 depending on width of course With a lot of camber, stretched tyres, and rolled guards could look pretty good/stance. Quote Share this post Link to post Share on other sites
scottharvey 60 Report post Posted June 15, 2020 Yeah i know they will be a squeeze the tyres are 245/45 so thats wrong to start with Quote Share this post Link to post Share on other sites
qube 3570 Report post Posted June 15, 2020 13 minutes ago, scottharvey said: Yeah i know they will be a squeeze the tyres are 245/45 so thats wrong to start with yep, so test fit is pointless. the guard will probably drop in on the tread pattern. its a reasonably good price for what it is. keep in mind you will probably need hubcentric rings or at least plastic sleeves as they *should* be 74.1 CB as they were originally designed for the E39. 1 Quote Share this post Link to post Share on other sites
M3AN 4016 Report post Posted June 15, 2020 I've currently got 18x8.5's ET38 running 255's on the rear and it would be fine at stock ride height although ET50 ish would be better (less poke). 1 Quote Share this post Link to post Share on other sites
Jacko 2156 Report post Posted June 16, 2020 5 hours ago, scottharvey said: Ok so tune is good just need to get it tweaked as the tune for 98 fuel is pinging under load. Im on the hunt for some wheels im going to look at some bbs rx 502 later today 18x8.5 Did he mention anything about resetting the adaptations? If its detonating, the DME is going to be pulling timing to stop itself exploding, even if you put 98 in it now its still going to have retarded timing as its expecting sh*t gas. Even on my stock map, car is not happy on less than 98 with the DME adapted to 98, I only run 98. Quote Share this post Link to post Share on other sites
Bandit 194 Report post Posted June 16, 2020 (edited) On 6/9/2020 at 8:25 PM, scottharvey said: Auto upgrades a guy called Lars. He seems to think 211kw but will get better figures after its done. Sooo happy with the tune, and was the car dyno'ed? Recall your car has had an upgrade too Dave, any guestimates of torqe and BHP increases? Edited June 16, 2020 by Bandit Quote Share this post Link to post Share on other sites
M3AN 4016 Report post Posted June 16, 2020 1 hour ago, Bandit said: Sooo happy with the tune, and was the car dyno'ed? Recall your car has had an upgrade too Dave, any guestimates of torqe and BHP increases? This is what's claimed for mine. 1 Quote Share this post Link to post Share on other sites
Willy Sea 46 Report post Posted June 16, 2020 14 minutes ago, M3AN said: This is what's claimed for mine. Refresh my memory, think that was a German tune, (actually most of them are) I'll hunt back through your posts Quote Share this post Link to post Share on other sites
scottharvey 60 Report post Posted June 17, 2020 (edited) Wasnt dyno'd the tune was copied from one that was and then modified to suit. I got it back yesterday and the pinging has been sorted out. So all is well. Edited June 17, 2020 by scottharvey 1 Quote Share this post Link to post Share on other sites
scottharvey 60 Report post Posted June 24, 2020 Update finally got hold of a new boot badge changed the crazy long aerial to one thats half the size. Also updated the tailights. 1 Quote Share this post Link to post Share on other sites
scottharvey 60 Report post Posted July 4, 2020 Update got some new wheels after a few F arounds on Facebook. Now ive never been a fan of big wheels and i cringed a bit when i saw they were 19s but as soon as i saw them in person and put them on i never took them off. Fitment is perfect. Tiny bit of rub in the rear around corners but i havent rolled the guards yet. Some before and after shots 1 Quote Share this post Link to post Share on other sites
Jacko 2156 Report post Posted July 14, 2020 Now for sale for 10k on faceballs I see Quote Share this post Link to post Share on other sites
scottharvey 60 Report post Posted July 14, 2020 2 hours ago, Jacko said: Now for sale for 10k on faceballs I see Only trying to fund for a JetSki if I get enough together in a month I’ll keep it a bit longer but I don’t use it. It just sits at my work doing nothing so bit of a waste really 1 Quote Share this post Link to post Share on other sites
