Jacko 2296 Report post Posted July 2 (edited) 2007 130i Boston Lemon leather, fine wood light walnut, comfort lights and Msport. BMWP 313 wheels, Arqray exhaust and the rocking horse sh*t BMWP intake. Cool spec cool bits on it, the interiors pretty pimp (and the intake and exhaust sound the part). Has literally all the minor issues, poor things just been neglected for awhile. Will be a bit of a project to unf**k and fix it all, then will sell it on as I really cant justify 3/4 cars. First step will be one epic interior and exterior clean, and see if there are any other goodies hiding. Edited July 4 by Jacko 4 Quote Share this post Link to post Share on other sites
elias 430 Report post Posted July 2 Does the intake actually sound any different? The airbox looks unchanged from the standard one? Quote Share this post Link to post Share on other sites
Jacko 2296 Report post Posted July 2 Yup it does, the upper lid is very different to stock (and the carbon snorkel obviously) Quote Share this post Link to post Share on other sites
balancerider 835 Report post Posted July 2 I demand a 130i duel between @Driftit and @Jacko 2 Quote Share this post Link to post Share on other sites
Driftit 2222 Report post Posted July 2 14 hours ago, balancerider said: I demand a 130i duel between @Driftit and @Jacko Haha I have actually sold 2 of my 3. I just have my OG LCI left. Though I have plenty of other cars :s Good thing is that Neglected E87's are not actually too bad to bring back to life. My Black manual turned out to be an awesome car. 1 Quote Share this post Link to post Share on other sites
Jacko 2296 Report post Posted July 4 (edited) Day 1 of operation "Save the Silver Lemon." Doesnt actually look toooo bad, has things growing on the top, all the fluids leaking out the bottom, but she has good bones! Wheel bolts were all seized, had to breaker bar them. Radiator is new, and someones put new bump stops on top of flogged out shocks. Started pulling the stupid sub box out, which turned into pulling all the interior out to chase the BS wiring. Will combine with pulling all the interior out, has a few hundred mouldy dick monalds chips under the seats and it smells like a hookers handbag. Edited July 4 by Jacko 6 Quote Share this post Link to post Share on other sites
Jacko 2296 Report post Posted July 6 Day 2 of saving the Silver Lemon. Cleaning out the interior... I wore gloves. Found the source of the stench, combination of mouldy chips and pie crumbs combined with a leaking jellybean scented pod airfreshener thing in the centre console, lovely cocktail, eau de rotting bean. Subwoofer and wiring butchery removed, drivers door speaker still not working however, multimeter time. 1 Quote Share this post Link to post Share on other sites
mmario 67 Report post Posted July 6 Jeez those seats are grim 🤔 Quote Share this post Link to post Share on other sites
Jacko 2296 Report post Posted July 15 (edited) Parts all ordered to fix the leaks and do all the servicing, debating on what to do with the exhaust. Could put it on the other 130, it does sound good and looks kinda cool, but actually want a Laptorr for it as they sound properly legit. Could sell the exhaust and go back to a stock one. Could just leave it on there (will get autosol'd up so it looks shinier). Same thing with wheels, could bang these ones back on, or swap them for the ACS Type IVs, which would look pretty legit silver on silver. Could even grab an ACS replica spoiler and ACS1 decals and make it an "ACS1" (Not that they really existed), 2000's eurotrash tuner it up with the oddball lemon yellow and walnut interior. Anyone interested in buying the exhaust (or BMW Performance 313s (they're genuine staggered set, made by BBS)) Baring in mind the idea is to sell it, not going to make heaps on selling it, but also dont want to lose coin haha. Thoughts? Edited July 15 by Jacko 1 Quote Share this post Link to post Share on other sites
Danch 45 Report post Posted July 15 I have a standard 130i muffler if you want to sell the quad tip muffler separately:) 1 Quote Share this post Link to post Share on other sites
Jacko 2296 Report post Posted July 16 (edited) Few hours on the Silver Lemon this arvo, its smelling less disgusting and the left side of the interior is no longer sticky. Done about all I can with the seats, drivers seat just needs redying, everything else cleaning up OK. Lots of scrubbing, multiple rounds, then leather conditioner. Wondering if I have a go at the headlining myself, anyone done this before? There is an interior place up the road that did my other 130 and its mint, but it also cost coin... and I can see myself losing money on this thing quickly! Edited July 16 by Jacko 5 Quote Share this post Link to post Share on other sites
Jacko 2296 Report post Posted July 19 Interior carpets cleaned, made some f**ken disgusting coffee.... the good news is its starting to smell less skanky. Waterblasted all the interior mats and they changed colour. Got the headliner professionally redone, dirt cheap if I pulled it out and reinstalled it - Jimmy (aucklandautoupholstery at gmail.com) out at Ardmore is the absolute boss. Drivers door speaker was blown, 0 ohms, so easy fix there. Starting to go back together at least on the inside. Have all the parts to start doing the real work, short of set of B4 Bilstein's. Sump gasket kit Trans service kit Rocker gasket kit Engine mounts Power steering line mounts Headlight level sensor Oilcooler gaskets New plugs All the filters as they are all nasty. Also ordered an ACS replica spoiler and some ACS1 decals... will get some fresh tyres for the ACS Type IVs, because eurotrash Should be a nice 130 when done. Still have no idea where coolant was pissing out from, decided the best way is to pull the whole front end off (bumpers all skewed anyway) and pull the cooling system apart and put it back together will make for better access to everything else anyway. The radiator and all the lines are new, so best guess is something just isn't together correctly or an O ring is missing or something dumb like that. 6 Quote Share this post Link to post Share on other sites
M3AN 4161 Report post Posted July 19 Nice work! Might as well remove and clean the vanos solenoids and filters whilst you're in there. 1 Quote Share this post Link to post Share on other sites
Jacko 2296 Report post Posted July 20 (edited) Interior back together, skanky to swanky conversion complete inside. Rear wiper is trashed, the usual issue, $40 on aliexpress for a new one Now the real sh*t starts, looking forward to sorting the headlights out will look way better when polished up. 6 hours ago, M3AN said: Nice work! Might as well remove and clean the vanos solenoids and filters whilst you're in there. Yup, and the all belts and tensioner... things been leaking for so long everythings just soaked in oil Edited July 20 by Jacko 6 Quote Share this post Link to post Share on other sites
Danch 45 Report post Posted July 20 Awesome work! Good to see another 130i saved from being wrecked. I hope you get good money for it in the end! Quote Share this post Link to post Share on other sites
Jacko 2296 Report post Posted Sunday at 03:05 AM (edited) Source of the coolant f**ken everywhere found, O ring cut in two when they reinstalled the transmission cooler to the new radiator... (midas, they do WINZ work...) Oil leak source is pretty obvious : everything. A lot of degreasing and waterblasting to expose the engine underneath the cm of oil crud. Power steering leak, still elusive, but will probably find it when subframe comes out. Next job hack through the crud on the rocker cover, pull the manifold, then rocker cover gaskets etc. Edited Sunday at 03:07 AM by Jacko 4 Quote Share this post Link to post Share on other sites
Jacko 2296 Report post Posted Monday at 03:38 AM Saving the Silver Lemon: Day whatever. Intake removed, solid amount of oil in it so will take a look at CCV. Rocker cover off, not the first monkey here as it was sealed on with rtv. Insides look pretty good, seen way worse anyway! Hydroformed exhaust cam (07 for reference) Headbolt has snapped, but thankfully the internal ones still have heads, so no major to solve it. Remains of the old micky mouse flange must have been floating around the engine bay, as found some of it under the car post wash #3. 2 Quote Share this post Link to post Share on other sites
