bmpower

Good luck with sale. You may need to check your price - i can't get 9k for mine on trademe at the moment which is manual and only 74k on the clock!

I have an e46 m3 style front bumper but its for a prefl coupe, not sure how easy it would be to fit to a prefl sedan though.

Noone can help with any of the above at all???

Buy new, don't waste your time with a 2nd hand one. Ring Paul @ Interpart 04 5666391. He's based in the Hutt.

Pm'd 1 left guys......

Yup Ireland ones Andrew. I would think urethane is alot more resistant to heat than rubber is, but then i'm no expert!! Oem couplings are rubber.

So i decided to get some urethane couplers from the states for myself and Nath - Got a couple extras at the same time. So have 2 for sale if anyone is interested? Brand new urethane couplers - replacement for part no.3 above. $70ea. Recommend changing part no.4 at the same time. about $3 oem from bmw, Part number. B32311114508 PM or 02102777666 if interested. Cheers.

I am in need of the following: * M20 Flywheel. * FL front valance in good cond, not overly fussed on colour although white would be best! Preferably with the twin open slots on the front. * Whats the highest ratio med case diff? Can you get higher than 4.10? Or possibly e28 diff and change the rear cover? * What is the best option for a replacement clutch for an e30 325i g260. The car mainly has track use so something uprated ideally? Post, PM or 02102777666 Thanks!!

We use Instant Windows & Tinting in the hutt work mainly, if my car needed doing thats where it would go. They have done 100's of cars for us and are very good. Just go darkest legal (35%). Most places have some kind of warranty.

Mate why not take a photo of your engine bay - loking towards the pulleys and someone on here may be able to help you diagnose which pulley it is - otherwise get a mech to look at it! If you keep driving it and you damage it more, don't say you weren't warned. BMW didn't put that pulley there for no reason!!

If its up to 9k then buy mine - you'd be hard pushed to find anything better!!!

http://www.trademe.co.nz/Trade-Me-Motors/C...n-344395990.htm

happy bday mate, hope you having a good one!!

This... Currently rocking the 'no caps' look...

No opinions??

I have a '96 msport e36 323i manual coupe for sale at the moment, with 70k on the clock and i'm only asking 9k..... compare that. Edit: Mine also has new oem bmw clutch, new z3 shifter, new control arms, new offset urethane bushes, just serviced etc etc.

All good - glad it worked!!

haha in his dreams!! you interested in it???

Nathan (brams) is gonna do the honours and pick them up for me - i won't finish work till about 6pm or later! Thanks again for bringing them down - your an absolute legend, you don't get enough credit for what you do for all the bsport guys! Cheers!

I like the idea - but then the 'interislander' will be imobile - well unless you want the car to decide where your going that is? Will order them prob next week i think - mainly considering the idea of solid mounting....

A couple of question for those in the know as there doesn't seem to be much information out there on the interwebs... The race series guys may be able to help on this one... The steering coupling in the car i just bought is completly shot, part no.3 in the diagram. I have removed the assembly and drilled/grinded out the original riveted section - now i just need a new bush.... Option 1: I bought a Nolathane one, only to find it was the wrong part. After some searching i have found a Nolathane bush which should work - for a Holden Gemini, however the thickness is only 11.5mm, when approx 15mm is what is needed. If i go with this option, will spacing the extra few mm with washers make any difference? Also Ireland Engeneering do urethane ones, but would have to wait for it to be sent over - i will more than likely order some of these anyway. Option 2: Get a replacement part from the $tealer which will be rubber - haven't made any enquiry's regarding this one just yet. Option 3: This is the one i need the experts help on - can i get a solid aluminium or similar 'bush' made and effectively 'solid mount' it? Good and bad points? The car is going to be a race car, so comfort isn't exactly an issue. The shield, part no.2, is this just a heat shield or does it serve another purpose? ie. can i remove it altogether? Any help would be appreciated!! Thanks.

Thanks! I agree Brian. Its funny how many 325i/328i's i see on the likes of trademe with over 150km and asking prices of over 7/8k+ and most of them are either 4dr or non msport...! Makes mine seem cheap! Anyway hopefully the price is an incentive! Ask anyone i know and they will tell you every 2nd day i say i don't want to sell it but the reality is it never gets used! When it does go i'll prob regret it, and where else do you find a 70k e36 these days?

Thanks mate! Yeah i can do - working on Thursday, what time will you be at the depo till?

Bump and price drop, need to sell - i have 3 e30's that need attention!!! http://www.trademe.co.nz/Browse/Listing.as...990&ed=true

Saw this drive past work too - will look out for the driver next time....!! Also a day or two ago saw a nice dolphin grey tech1 m325i....