Jump to content

c.robertson00

Members
 View Profile  See their activity

  • Content Count

    694

  • Joined

  • Last visited

Everything posted by c.robertson00

  1. c.robertson00
    Grind it back and bog it lol
  2. c.robertson00
    10k on wheels.... I dont think so.
  3. c.robertson00
    Is your car a UK import Nathan?
  4. c.robertson00
    Look in the yellow pages.
  5. c.robertson00
    It doesnt matter if the seat is FIA aproved for the autority card. If its mounted on standard rails then you dont need to worry about anything for a WOF either
  6. c.robertson00
    There are two wires that go to the starter. Ones a big fat one and the other is abit smaller. They only fit on there respective studs
  7. c.robertson00
    Comes with all the linkages except the heat shield for the rubber bush. It works perfectly and just came out of my car to make way for power steering. $130
  8. c.robertson00
    I dont think it makes much difference at all tbh
  9. c.robertson00
    Spigot bearing??? Use a dyna-bolt from Mitre 10. Get one that is the diameter of the hole and wind it up then it expands and pulls the bearing out
  10. c.robertson00
    I got a pair of spring compressers from Repco for $40.
  11. c.robertson00
    38 Grand!!! What did you hit? Or what were you driving?
  12. c.robertson00
    You wont need the fan for extra cooling dude. My cars temp never goes over 1/4 even in traffic
  13. c.robertson00
    Your car has king spring superlows doesnt it? There about normal height for "low's" as theyre about a 40mm drop
  14. c.robertson00
    You mean the front towing eye
  15. c.robertson00
    Id be keen on a diff bush also if the price was right
  16. c.robertson00
    yea it sold. it was a steal!!!!
  17. c.robertson00
    Whats the advantage of useing urethane engine mounts?
  18. c.robertson00
    Wicked! How bout this http://www.trademe.co.nz/Trade-Me-Motors/C...n-229960112.htm
  19. c.robertson00
    The shocks dont control the hieght of the car the springs do. Take the rubber spring pads out from under the rear springs to get about 10mm lower
  20. c.robertson00
    Good base for a race car but thats about it
  21. c.robertson00
    Why not just leave the 2.8 crank in the M52 and put that in? As soon as you start rebuilding engines and doing headwork it gets real expensive real fast.
  22. c.robertson00
    Put me down for a set of rear subframe bushes.
  23. c.robertson00
    The TV1 motorsport show is rubbish these days. It was good when they had F1 and DTM. Now its just MotoX and Nz rallying
  24. c.robertson00
    SIR E30 has rears that he can do for $65 delivered
  25. c.robertson00
    Ill do mine for $100 shiping included
×
×
  • Create New...