BM WORLD

tensioner $80new pulley $50 new or have 2nd hand ones $45 both parts. i re grease the bearings too

i also have a 3.91 med LSD and 3.25 med LSD for sale to fit e30 e28 e24 etc

i have a z3 aerial in stock. and also new heater elements. get it scanned for the staling fault , coul dbe a vac leak or faulty cam sensor etc

for starters what gearbox are you running in it ?? me mate uses a 3.73 in his M535i e28 with the overdrive getrag 260 box i use a 3.91 in my e28 m5 with the same gearbox. but being a lighter car you could stay with a 3.64 etc but if you are using the dog leg close ratio box then a different diff woul dbe needed. see he and work out your revs etc.. http://members.dodo.com.au/~wawawa/revs.htm

worn out lazer or cd motor etc . i have replacement cd stackers if you want one 021433600 brent@bmworld.co.nz papakura

have new and used ones which type is it , picture will help

here ya go , make your own. http://www.trademe.co.nz/motors/car-parts-...n-584339241.htm

i have black leather with wood trim kits , and also black leather with silver trims bits . 021433600 brent@bmworld.co.nz papakura can do a deal on complete interior etc .

last chance before it goes on trademe

i suggest you call the guy that owns it . just call or text him but probably better to call him A/H brendan 021829032 its in manurewa

do it

just use all of your electrics , change the afm to the bigger 328i type . remap the ecu . or use the ecu ews and chip from the 328i etc . use teh m50 sump , exhaust manifold and a 325i m50 intake etc . lots of different ways of doing it depending on what parts you use or get etc. or just run it on the 520i ecu , afm manifolds etc , will just be strangled a little for topend power

yes have studs and new rubber grommets for the valve cover bolts brent@bmworld.co.nz 021433600 papakura

got some new ones in stock 021433600 brent@bmworld.co.nz

there will be the electric plug under the seat under the join in the carpet , ready and waiting for you to plug these blue baby's in

yes it is the set you saw. photo's dont really show the true colour and condition etc.

ok you can have the one from the 635csi for $700 , come help pull it out. not worth putting a 3.5 into the 520i , better to fit a e36 328i or e39 528i single vanos engine into the 520i or a 325i 525i type etc will make it go quite well and no need to change the gearbox or wring etc etc . bolts straight in.

is this for your 525i touring ., this is the blue (indigo colour)would suit it well , maybe remove the rear leather covers and get them fitted to the touring rear seats etc.

buy mine!!!!!!! http://www.trademe.co.nz/Browse/Listing.aspx?id=580755180

okare you thinking of putting it into your 520i?? i think you will want the e34 535i engine or e32 735i engine you will need the matching trans , driveshaft , exhaust , engine loom , ecu afm , rad and plenty of other parts etc etc. early engine 1982 to 1987 can be fitted in place of a later engine 1988-1992 or is it going into a 535i with a stuffed engine??

whats it going into , which version do you want ?? i have a early high power 10;1 compression ratio type or are you wanting one of the lower power lower compression later ones?? what do you call cheap?? have it listed here . http://www.trademe.co.nz/motors/car-parts-...n-580937354.htm but call me if you want to talk turkey 021433600 brent@bmworld.co.nz also have a lower block only , and can probably find a head if you want to build one up etc. http://www.trademe.co.nz/motors/car-parts-...n-582081842.htm

no turbine covers

my mate has this rolling shell in manurewa call him , before he scrapes it http://www.bimmersport.co.nz/forums/index....showtopic=42212

i have black suede one that has gone all shinny , so i suppose it would need recovering if you want it perfect. small size type from a e30 etc

hi a 2L is not really my thing , but may consider it as a part trade , with lots $$$ my way