BM WORLD

who and what number did you text??

my mate has some front black leather ones from e30 $450pair ??

ya should have called me when you where up could have gone through that e34 parts car i had sitting there at marty's , which it sounds like you did .hey brendan might have a lhd console he wrecked a lhd m5 a few years ago

have some new 51mm type front ones.. what size are yours. http://www.trademe.co.nz/motors/car-parts-...n-573261681.htm $320 if you want them thanks brent BM WORLD 021433600

yes have seen a few pivot pioints worn down , which then makes the clutch fork push on funny angles , and damage the fingers on the pressure plate and allow the slave cylinder rod fall out etc

check for moisture/carbon build up etc in the dizzy cap , excessive wear in the cap and rotor etc

figure it will need a new clutch and flywheel . go for a new after market flywheel and clutch $1500-2000 plus a days work.

another option is using a early single mass 316i 318i 318is 318ti type m43 m40 m42 flywheel and getting the clutch kit ramped up to suit the 328i engine , have done a few like this now and they work quite well . they weigh about 9-10kg depending on which one you get , bolt straight on and use the same starter motor etc. or try darren he sells these in nz http://www.trademe.co.nz/motors/car-parts-...n-572986426.htm

yes faulty control displau unit , swap it out for another one , i have some , 2nd ones and reco'd ones

does the interior lioght work properly , on when door is open and off when closed??? the door switches wear out on these cars , so the int light stays on etc and teh door locking system wont work. check for wear marks on the door switches , espeically the drivers door. push the switch in manually and see if the lock system works

i dought it , just some cheap ebay badges

is this for the e30 , just replace the shaft etc. from another parts car like this one http://www.bimmersport.co.nz/forums/index....showtopic=41433

I think the post refers to the turn signal indicator lamp in the dash - the one that blinks in synch with the turn signals which are working outside the car. Yeah, sorry for the confusion. I do refer to the Turn Signal Indicator lamp on the dash. just replace the bulb in the dash easy enough job

alpina front spoilerhttp://www.schmiedmann.com/en/bmw-e28/1934...product=4100653

maybe catch up , if ya have time.

do you mean they cant read the odometer??? replace the back light bulb fro a new one

looks nice e28's are a great car same colour as my mates one see pics here

have also offered to help

just bumping this for my mate\ engine sold ,, dash sold , doors sold gearbox manual kit removed and ready for sale. still has bonnet , guards and bumpers , some grilles etc still on it wheels , can sell the rolling shell call him if you want any bits before it goes off to the melting pot

looks good fun car to drive , lots of nice low down torque and lightish body my mate use to onw a nz new white one with black leather a few years back ,was on its flat metrics etc shadowline trim etc yea come buy some time cheers brent

i use urathane , done plenty , sets like rubber , holds really well brand called "carbond". panel beaters use to stick bodykits on etc most other glues are to brittle etc or dont bond well to carboard and plastic etc http://www.holdfast.co.nz/pages/product_de...&psid=20054

oksounds like i might know it from hamilton?? do you have any pics etc was it a track car?? abs may be rust around the abs rings , or broken abs sensor wire etc

ok which m535i was that?? colour , spec etc??

have parts from one , but james got the roling shell , so he can rape it for its floors etc. why a e12???

yes i suggest you call or text brendan ,his number is above. he doesn't hang out here on bimmersport