BM WORLD

went down to taupo with the bmw car club this weekend , driver traing day . took the e36 328i down (e28 m5 engine still in bits) got to do some laps with racing ray williams in the passenger seat . was a lot of fun , with him yelling instructions . even managed to spin us around was hard trying to keep the e36 from sliding with its cheap junk kingstar tyres .

cheaper to run and maitain than a e38 . i have a nice 1990 750il here at work . black with tobacco leather

i brought the car with 465,000km the old engine was still going but had a knocky camshaft etc drove it all the way back down from nth of wellsford to papakurai then fitted a semi built up engine into it which i ran untill about 490,000km then came across a M88/3 m-power engine and have since fitted that into it , which i now have pulled out and fully rebuilding that one with some extra's for more power etc

my e28 m535i has 512,000km now , still drives fine

was done at about 130-140k , i pulled a perfectly good engine out and replaced it with a newly built up engine and fitted the 5spd box at the same time. had new rings , bearings , 10;1cr pistons fitted , honed bores , redone the head to all new gasgets , valve grind etc etc . shocks etc also lots of other bits done around the same time also some repianting of body kita and some panels touched up etc.

http://www.trademe.co.nz/Trade-Me-Motors/C...n-283248720.htm wrongly advertised again . full hartge body kit hartge head , high comprssion pistons , rebuilt engine . lsd , new clutch, 17" by 8" bbs alloys new bilsteins , jamex springs , seats could do with a redye . the ecu could do with a remap to get the full advantage of the engine mods . should do close to 140kw at the wheels on gavins dyno if this was done .(standard engine's do about 110-120)

bump . anyone , sponsors etc ???

done. or you can call me 021433600

us and euro prices . for vinyl and wood types http://bmwfans.info/parts/catalog/E34/Seda...ng_partition-2/ m5 type. http://bmwfans.info/parts/catalog/E34/Seda...ng_partition-5/

low oil level maybe? , as glenn said , probably stuffed now , most old auto trans dont like track days . just convert it to a manual or put another second hand auto box in , i have both types in stock if needed cheers brent

wow thats a nice price . i can try if you like through my contacts . where you asking for a wooden one ?? they are expensive .

have this spare grey gearlever boot . also have this red panel and boot if you want to barrow it to make a pattern of the panel in plywood/timber etc for the leather boot to fit into . cheers brent

have a indash e46 cd player if anyone is interested in it ,. hard to come by most e46 have tape decks and cd changers or have been replaced by some chepa after market stereo http://www.trademe.co.nz/Trade-Me-Motors/C...n-283513309.htm also a black leather set from a e39 touringand other parts http://www.trademe.co.nz/Trade-Me-Motors/C...n-283512094.htm

i might have some manual shift boot and panel bits left over . i also have sprayed the panal and shift boots black before seams to work ok. good work on getting the manual kit what did that freight cost you in the end cheers brent

just need one to make up a set . dunlop direzza 225/45-17" new or second hand if it has a good amount of tread anyone have one ??? or if not a pair of something similer cheers brent 021433600

got these in last week . also have some twisty type mtec side skirts from this 318ti m/s. off to the painters maybe next week.

well said my thoughts too. but yes nice car and good luck with the sale , but my 2 cents worth . is that if you are going to try and get top dollar for a car i think you might need to leave some of the goodies on it (like nice wheels etc)..

nice collection you have there .

also e24 blocks . most likly best option is the 1982(9 mth) to about 1987(9mth) block with the 10;1 pistons. and you can run them on the later motronic system if you like from a e34 535i and e32 735i etc

side skirts are teh same size for compact , sedan , coupe , convertables and tourings . fronts all the same as well , rear compact one only fits compact . rear sedan ,coupe ,convertable and touring etc all the same. have some side skirts at the moment . and have a front one that needs repairing . and possibly can get a rear one in . cheers brent

are you wanting the eraly early block with the flat pistons and 94mm bore with 84mm stroke with 10:1cr . or the little bit later one from e28 e23 e24 with 92mm bore and 86mm stroke with piano top pistons?? 10:1cr probably can help cheers brent

yep easy retro fit . just need the servo motor , cruise control box and stalk . can help you there thanks brent

yes very hard to find , have a suede one in my shed that i'm not sure what to do with it

yes have most parts , give me call in teh day time if you like 021433600 09-2991234wk thanks brent

not sure , but if bring into my work we can scan it , and also we most parts to supply if needed thanks brent european car parts 10 parker st papakura 021433600 2991234