skidz

I run a WAR chip in my Race car, cheap to buy, but still $$$ to have tuned. Andre at SpeedTech did a good job though

Been watching it. Cant believe how high the bidding has gone. Very good build but not my taste for the colour combo...

thanks, Geoff

Angus, how did you end up with such high compression? If you started with a standard 325 motor, installed a 2.7 Crank and rods, and retained the 325i pistons, you would end up with low compression - you need to deck the block. So I am picking you have used the 325 rods, which are longer, to give such high compression figures- if you have done this you are in serious danger of the pistons hitting the head, as well as the valves. I guess the other option is that you have used the 2.7 rods (same length as 2.0 rods) and decked the block, as per the literature, but have gone too far... So I would be more concerned about making sure the mechanical side of things is correct before you go any further.

If you can, get the 2.5 with late model motronic, ie from a facelift car. Makes the electronics much easier - dont try to use the 320 L Jet system

I see to have acquired another project car (cant say too much) but it needs a right rear door, so if anyone has one in Diamond Schwarz that would be great Cheers...Stephen

Thanks, John I will let her know

About $15 by courier or $10 NZ Post

Bump, managed to sell off lots of stuff so have edited original post with what is left, there is probably other stuff still to be uncovered as I clean out ever deeper.

Thanks, Glenn. So, auto electrician, or just to BMW?

Hi guys, a friend here at work has a 2000 325i Motorsport; the heater fan has stopped working. Anyone know which fuse# and relay# to check? Or other likely cause? Cheers..Stephen

Good luck with sale, Oli, cheapest competitive car on offer

In which case just slot in another motor... I have these http://www.trademe.co.nz/motors/car-parts-...n-483900839.htm

The car was sold last year, new owner based near Feilding and uses in Intermarque sprints

Give me a yell next meeting, we may be able to put my camera in your car

It is always worth saving an E30, esp. if it is in good order and low k's. There are plenty of guys on here who have parts available.

Looks like the right mount, you sure you haven't got it back to front?

1 doz speights will do if you going to pick up

yes have VDO 6 cyl cluster

What you need is an E30 318is as your daily.

Well on this track then In Welly, I have an engine hoist, and a car trailer, and a few other random tools I have no idea how to use... Happy to help out BS members where I can

yes

No sorry

Bump, updated list with more goodies

You should get more than $50 for the Pfeba front spoiler...