Surge

You can get a very basic turbo setup on there for fairly cheaply, but as for the extra power it will make from a 2.0, you might as well just get a 2.5, or 2.8... How big is your budget? An aftermarket computer will let you get the most out of your car in it's near factory state, and you can take it with you between cars, and... you can use it to calculate fueling/spark for a varible that the current one doesn't really have an allocation for - pressure above atmospheric! Boost!

Hi all, I've had this sitting around for ages. A Mtech2 replica side kit for an E30, either 4 door or 2 door (I'll confirm - it's got additional pieces) Being fibreglass, It's not 100% and as usual with most fibreglassed things will require work to have it fit properly.

I'd love to see the Hello Kitty tip on a ferociously fast car.

After 1x E23 (7 Series) Windscreen To Christchurch. Chur!

There's a black one with a turbo bolted to it in Christchurch, And a blue one which was for sale at Fast Forward TVR. Not sure where the blue one is now.

Link used my uncles Evo 9 (Evo 9 being the only one Evo with MIVEC, Continuously controlled) to base their plug-in engine management on.. So they do have the 'technology' to do so. Try asking them again, and mention the black Mcoupe turbo.

The MCoupe Turbo down by my work is running a link computer with vanos control. I will be using it with my project.

If your considering a non-BMW swap consider the Nissan VH41DE - A heavily over engineered piece of kit.

Selling on behalf for Motorworld Auotomotive. Came off a 318i. Mechanic felt it wouldnt matter what car it went on, perhaps the car would sit lower if fitted to a six? Will confirm price, he could only give a ballpark $250. Put some offers on the table and i'll present them.

Bilstien lowering springs for an E36 (Full Set)

I'd try this first.. If you want to remove the 'new' layer of crappy childrens paint - Use a clay bar, We use clay bars to remove overspray, Concrete, Coal dust, or metallic dust from imports at work. You can pick one up from a place called Pacer, or Supershine - Both nationwide.. Use in conjunction with water and it will lift anything and everything from the paint. You just keep the surface wet, and rub the clay over the offending material - this does no damage to the paint underneath.

PM Sent

Come in sometime during the week - the guys a couple of buildings across have a turbo M Coupe you might want to cast your eye over...

Don't let your gender be an issue. I'm a guy and don't know every thing about cars. But for future reference, learn everything about every car.

Sold

GIS 7 is also worth a watch.

Yep sweet. The earlier the better, this other party is supposed to come wednesday. Will be at work.

Chris00 its not THAT rough! Spend about $1500 on paint & panel, mechanical & interior this car would be mint. Weve an offer of $2500, so if anyones interested act smartly.

Guy must have had his eyes shut when on the rolling road! When it first stopped sparky friend earthed a wire which worked for a bit, No idea where to look tho, didnt take him long but hes no longer in town. Driving by the rev counter!

E30 1990 325i Manual SE NZ New I will try to describe this car as accurately as possible.. Overall condition would be rough, especially interior - Previous owner had a bit of a hack with the wiring loom (trying to install a stereo) No stereo, Dash lights do not work.. Suspect earthing problem. 310,000kms (approx, speedo stopped working a couple of months ago) again, Suspected earthing problem - Has signal from speedo sensor. Have tried different instrument clusters to rectify the problem after earths were breifly checked to no avail. Body has one missmatched door on the drivers side, car was backed into and door replaced - slight colour mismatch and minor dents in replaced door. Bonnet has dent + chipped paint, otherwise ok. Front skirt has scuff mark (as pictured) Mtech2 Spoiler, SE Side Skirts, 9 button OBC, Maplighted mirror. Engine suspected vacuum leak (split intake boot - easy fix) idles rough, runs fine at higher revs - could do with new spark plugs, leads etc.. A general service would do the world of good. Unsure of when cambelt was last done, therefore replacement is suggested. Has fresh WOF, and will be sold with 3 months REG. As is, where is. Asking best offer under $4k Contact David or James anytime on 03 379 1390, or 027 200 5693

The ZF box which came with the M50/S engines (obviously) and the one out of the M20 (Getrag 260) are the ones which fit. M30 box, 535i is a no go.

It's a shame thier country doesn't have a decent intellectual property enforcement system - or else the west will never take them seriously... They've got a good sized army though..

Not even badges are safe... http://www.bydauto.com.cn/

It's the same as someone rocking up behind under boost, or heavy accel.. It's just because they make a funny noise we judge them - it's because they are different. There will be retards in every brand of car anywhere and everywhere doing stupid sh*t. The only 'marque' related driving offences I've seen that are actually consistant are elderly in Suzuki's or Daihatsu's driving too slow.

1990 325i SE ? Wanting under 4k. NZ new, new warrant. Not immac, been a restoration project havn't had time to finish. Sport seats, sport steering wheel, Mtech2 spoiler,OBC + usual extras SE's come with.