Jono51
-
Content Count
1185 -
Joined
-
Last visited
-
Days Won
3
Everything posted by Jono51
-
There are two types which one are you after?
-
Microfilter ? A common neglected item!
-
Welcome, glad to see another bimmer owner, just be cautious in the wet and in general as things can go wrong pretty fast, also it will not pass a wof with this modification cheers Jon
-
I like where this thread is going M30b35 stroked? That would be cool
-
+1 Get it checked properly The last thing you need is further damage or new faults introduced. Also just to add, Be careful constantly jumpstarting , last thing you need is a power surge
-
I've got some momo 18's with tyres if you are interested they will fit e28 Email me and I can send an image to you Also have some really nice dished 17s too [email protected] Cheers Jon 04 3801089
-
g260 driveshaft from guibo to knuckle 580mm hope that helps cheers Jon
-
they are pretty cheap from BMW cheers Jon
-
check the pinout on the plug and actual partnumber off the trans, further to 5hp18 ,there should be a bmw part number as well hate for you to get the wrong box cheers Jon
-
hey mate new toy, great stuff! cheers Jon
-
What's up Bimmersport? Introductions..
Jono51 replied to lukeappleby's topic in New Member Introductions
Welcome, good to see another E30 looking forward to seeing you soon cheers Jon -
I think that the problem is that there is so many cheaper variants around, made of poor quality you can get the cam regrind done, kelford cams maybe even get it's profiles changed or buy new ( 288) use only new rockers edit; check the rocker shafts for wear and also check your guides too
-
Hi Jamie,where are you I might have Something call me 04 3801089
-
give me a call or pop by 04 3801089
-
Did you do the diff bush or a mechanic? What do you mean by 15 percent worn? Either they are worn or not. How much junk is in the boot,maybe another mechanic is needed Edit,excuse me if I'm a little blunt,just amazed that your not making any headway,especially being that it has been to a garage
-
call me if you are interested,
-
WTB: '90 320i set of lowering springs + straight pipe
Jono51 replied to SlaterSpawn's topic in Want to buy
Hey mate, here you go http://www.trademe.co.nz/Browse/Listing.aspx?id=414158283 -
cheers Andy , Heya Lucan, have a look at this thread below, see if they are your sort of thing, no stress mate cheers Jon http://www.bimmersport.co.nz/forums/index....showtopic=37508
-
if i get the bottom end for 400 wud i be able 2 get a bottom end rebuild and then get everything put in for 1500? parts and labour for $1500, simple answer no, edit; buy a complete m20b23 or m20b25
-
they should have noted it on your service sticker or told you upon collection of the vehicle
-
no geussing firstly, degrease the engine untill it is immaculately clean, then run it and look for the leak easy
-
1.maybe tell us what your budget is?, that will be a decider on what you will be doing 2.eta bottom ends are getting a bit old now and you could be up for a bottom end rebuild firstly 3. reliability depends on the quality of the assembly and parts used and depending on your budget,
-
good call not driving it, depends on your budget, SH or new, be wary also of new, you pay for what you get and there is cheaper options out there that work as great sives! spare no expense on a radiator, cheaper than a replacement engine
-
325i kit won't work in a 318i
-
looking good mate!!! all that hard work has paid off