Arron

up for grabs is a set of S54 ITB these can not be sent or picked up until after the lockdown. before anyone asks, no, these are NOT off the burnt s54 we have they come as shown in the photos looking for $800 Christchurch

cant help with the shift carrier directly..... but can sort out a floor mounted shifter for you!

We have the full 330 setup on our track car, running the OEM e36 master cylinder you have wayyyyyy to much rear bias. We put a bias valve on the rear to solve this. However, because the rear pistons are quite a bit bigger than the e36 ones you end up with quite a soft/long traveled brake pedal. we have ended up putting the 330 master cylinder in the car aswell. the cylinder itself bolts on fine, but the activation pin inside the booster becomes to short so we had to machine up a sleeve to extend that pin! brakes are pretty amazing now!

As for the others who still get away with it??

Don’t see the problem, everything that is specifically listed has a price beside it.... but now that you say it guess those forum rules don’t apply to certain members on here ?

Getrag 420 Came out of a 2002 e46 m3 has 180*** km on it It is a smg box, can be converted to manual easily still us the shift unit and clutch cylinder on it Comes with front half of drive shaft Can also come with a m3 clutch and flywheel for extra $1600 Located in Christchurch

Yes it does

We have had conversations with our engine builder and we see no issues arising with the head. Will happily get it checked over che hardness checked for anyone who is seriously interested. but from his experiences in rebuilding several Burnt engines he has said he would be happy to re use it if it was not for the moisture in the block, we were going to be using it for ourselves without hesitation until we get the v8 up and running as for the price, after conversations with some people as to what they have sold parts for, and what someone has locally just sold a bare block for, we believe the price to be a reasonable starting price. Again, as it says open to realistic offers. For someone who had a engine already with a block that is toast or whatever, there has to be a value in it... we had had people asking for us to sell headers and throttle bodies ect, and the answer has been we are bout going seperate anything off of it, because if all else fails, and it doesn’t sell, we will rebuild it and use it, and done want to have to re buy the stuff that we have sold

S54b32 Has been in a fire, pulled the head this afternoon to Check bores. There has moisture in the bores Head is in good condition Comes with headers and throttlebodies Vanos unit itself is fine, solenoid box has been burnt Perfect for someone who has a blown s54 to use for parts, or for someone wanting to rebuild it $3000

Wrecking 2002 E46 m3 all parts available except diff and diff cradle (although we would sell the complete rear ended for the right offer) HK sound system smg getrag 420 with front half of driveshaft $1600 seats are in good condition apart from a tear on the drivers bolster steering wheel $300 Happy to cut the rear guards off wheels are sold, everything else available

can say that it is coming to a good home ?? will be being used as a parts car/donor car foe a e46 LS turbo track build about to begin let the fun begin!

its a very interesting thought as to the future value of these, have always wondered when seeing the likes of EZJ977 come up if it should be snagged and stored for future days

Will keep the shift boot for the conversion but will sell the arm rest for sure, flick me a message

Damage to the passengers side outrigger from a pot hole nothing major, an easy fix. We we are currently toying with the idea of keeping it together, repairing it, putting it back on the road and turning it Into a targa car

Just shocks and springs

Wrecking e36 328 factory motorsport ZF manual conversion. New clutch 20,000km ago Has done 240,000km Has a m50 manifold and tune Free flow aftermarket headers paired with catless twin exhaust and Remus back box full leather interior alloy radiator (tank combined) E36 m3 suspension round only 10,000km from new. Front springs were also new m3 springs, have been compressed 15mm also have the front offset m3 top hats Good tires all round on tsw mags 17 inch. Have all the centres but missing one centre nut engine, loom, dme $800 ono manual conversion $2000 ono exhaust $700 (complete headers to back box) no I won’t have photos of the headers until they are out full leather Interior, seats, door cards $500 (see photos some stitching has come away) Located in Christchurch message me or call me on 0221952364

running the factory ecu, currently working on a tune for it!

This is a sad situation, that car belonged to a member of one of the e30 Facebook pages and had it stolen for the rims ??

Well it’s been a while! Time for a update I think the pictures will speak for themselves ?

Ah yes for e36

Stage 3 flywheel and clutch kit Brand new Chromoly 14 pound flywheel PUK clutch New throw out bearing New pilot bearing New flywheel bolts brought this for the second race car but have gone down another path $750 plus $15 freight nz wide

slaves have gone sorry

bump

those cup holders look fantastic in there! GLWS!

will take 25117580281 pm sent