polley

Should run with out it... There is two plugs there, one is for the crank position sensor, you may have unplugged that (which it wont run without)

Strong colours

Can you post a piece of your apache log? I check my apache logs everynow and then, and apart from some skiddies trying some lame attacks I have not seen anything like this.

The part where I get confused with is where extra monitoring will be put on your account. What account? Also, what are you seeing in your apache logs that indicate these 'evidence collectors' are 'hitting' you?

Yeah, just watched the full video, she does.

Don't some of the E36's already come mounted to the strut, and some to the control arm? Sorry, unfamiliar with E36's.

Anyone here mounted their swaybar to the strut like the m3 for extra stiffness? Was going to get a bigger swaybar, but this is cheaper and stiffer.

don't think she does.

Thread save

da f**k? Your ISP does not monitor your account, they do not give a sh*t what you do.

Fully sick, lays frame.

Not cheap but... http://www.rapalloav.co.nz/products.php?vi...p;detailid=2165 Or you could go with these: http://www.rapalloav.co.nz/products.php?vi...p;detailid=1218 but seems alot of mucking around and ugly.

Good luck with your pirating and copyright infringement goals of 2011 (srs).

200KB/s is pretty weak.... Considering I normally download around 1 to 1.5 MB/s Just going to keep downloading tbh until I get my first warning notice (prob never happen)

Might give it a miss then, it's $150 for the carsoft scanner and then a bunch of dicking around getting it to work. Will try cleaning the ICV and see what difference it makes.

Crankshaft.

CPS?

Will run fine without it.

Belt could be slipping. Check condition and tension of the belt.

Yes. And most VPN services hate people using torrents etc, so don't be surprised if you get kicked off.

Isn't that what girls do? Shut there eyes, hands off steering wheel etc and hope for the best lol?

Bit of a secret hoon, I might try and get him to go along to a track day once the car is sorted out. The clutch should be fine, but it was stuck to the pressure plate and when it finally came off a bit of clutch material had separated from the clutch and was stuck to the pressure plate. I cleaned up the pressure plate etc, but not sure how the missing material will effect the life of the clutch, it is only a little bit but will not be surprised if it needs replacing later on, however it held fine the other night.

Standard dual mass. Will most probably convert to single mass if I replace the clutch later on.

Do you find yours sort of holds revs between gear changes?

I didnt see a drop of rain or snow all weekend. :/