project throttle part 2

[Creaver 55]

^^

That looks f**king awesome mate. I can't wait to see some vids of this thing going

[kerry 10]

to disperse heat from the coils but it bloody ugly so will probably just leave it off and have the ruff and tuff look

[kerry 10]

^^

That looks f**king awesome mate. I can't wait to see some vids of this thing going

if i had a good video camera i would , if your in town ill take you for a burn once its going

[*Glenn* 854]

Are the socks supported on the inside ? You wouldn't want the foam getting sucked into your engine.

[kerry 10]

Are the socks supported on the inside ? You wouldn't want the foam getting sucked into your engine.

yep sure are they have springs in them to stop that

[Eddie 66]

Those ITB's are going to sound wicked

[OLLIE 26]

tough! I can't wait to hear this thing

[mark247 39]

to disperse heat from the coils but it bloody ugly so will probably just leave it off and have the ruff and tuff look

Do it.

When I had mine off the other day I thought about painting the valve cover black and just rolling like that, looks cool if ya ask me.

[kerry 10]

eventful weekend , have sorted were everything needs to be and what i dont need (pic2).

have wired injectors, ignitor box, map sensor, oil presure guage, alternator charge light, temp sensor, and starter feed.

Edited July 6, 2010 by kerry

[Lucan 196]

Coming along nicely, god that second picture scares me. Hate wiring.

[antil33t 90]

Awesome... awww come on... wiring is the easy part.

[kerry 10]

its becoming more fun the closer i get

[hybrid 1043]

going to sound such the me109 when finished,,,

here is mine with the plenium on

[kerry 10]

yea that sounds wicked, i beter try and sus a video recorder for the start up etc. might end up cutting the plenum up to fit .

[btccm3 1]

Awesome... awww come on... wiring is the easy part.

+1 for that its only wire and solder ezy as m8

[hybrid 1043]

yea that sounds wicked, i beter try and sus a video recorder for the start up etc. might end up cutting the plenum up to fit .

before you do that, what exactly is it fowling on ? It may be simpler to modify the thing its getting stuck in, or atleast the mounting position?

[kerry 10]

it fowl's on the brake booster which is already the mk1 golf system. i dont want to move it from its factory location but we will see.

[MLM 57]

Not sure where you are up to on this but try not to sell the trumpets and plenum untill you have a final solution. From what I have been looking at recently on my project they may be handy parts to have arround, particularly curved trumpets.

Im sure a plenum could be designed to fit, maybe turning the trumpets so they face forward not down will buy you some space and possibly flow inprovements.

[kerry 10]

Not sure where you are up to on this but try not to sell the trumpets and plenum untill you have a final solution. From what I have been looking at recently on my project they may be handy parts to have arround, particularly curved trumpets.

Im sure a plenum could be designed to fit, maybe turning the trumpets so they face forward not down will buy you some space and possibly flow inprovements.

yeah i havent got that far yet but im liking your design so far. im half pie thinking not to have a plenum at this stage and blocking the heat from the engine hense my little box over my radiator. in the end it is going to depend on what results i get on the dyno.

[hybrid 1043]

it fowl's on the brake booster which is already the mk1 golf system. i dont want to move it from its factory location but we will see.

Any reason why ? you can do exactly what I did. re routing the brake lines is a small bit of work but you can use the factory lines, also the pedal to swing leaver push rod can be modified as with the bracket .. its worth it.

[hybrid 1043]

Further to this, the heater pipes are 1 hours work to modify and the brake set up took a couple of solid days. Let me know and i'll get some relocation plates made up for you.

It will be a bit silly to come all this way and not get the whole thing to fit properly. Dont give up on the plenium so easily !

Don't get me wrong, I get the whole trumpet thing but also if this is going to be road driven, its probably a good idea to have the plenium for the norm. Noise and general heat soke issues will become annouying for you.

[kerry 10]

yep i know what your saying there josh and the work is no issue for me but at this stage i just want to keep the factory fitment as it is for now, i think if i was going to do any mods to the brakes i would go all the way and get a pedal box like these

http://www.cardwells.co.nz/Our_Brands/Tilt.../MenuId/36.aspx

then the plenum will fit straight on

Edited July 7, 2010 by kerry

[thorburn 121]

what are you doing for crank ventilation?

[kerry 10]

nothing bar the rocker cover thats how its always been, seems to work fine.

at the tuners now so not far away.

[kerry 10]

update:-- gggrrrr getting sick of waiting for tune, need to drive it