Jacko 2156 Report post Posted July 26, 2011 (edited) Parting out my project - 1985 Mtech 1 E30. Uk import 323 sport. $$$$$$ spent over christmas 2010. Receipts can be provided. You will not be dissapointed with parts, lots of new gaskets/bolts/nuts etc used, and most parts given a tickle up only a few months ago, so will literally bolt on with little hassle, cleaning or $ to pretty up. All mounts etc were new 6 months ago, literally every lock nut in the car was replaced No time wasters or dreamers, no money no part Car will start to be parted next week, if you want your name on something, 25% deposit required. Photos of car/parts here http://www.bimmersport.co.nz/forums/index....t=0&start=0 Grab ya self a deal, grab all the bits to M50 your E30 on the cheap, or make it handle like a go kart. General - 85 E30 coupe shell, rust in the usual spots, paint is fuct, random aftermarket front bumper (BBS?) Mtech 1 skirts and rear end. BMW NZ towbar. Will not be rolling, No front seats or dash or steering wheel, but everything else is there. Electric windows, Electric sunroof. Front glass is new. Spare wheel is bottle cap alloy. Likely includes anything that isnt listed seperatly here. Ask if unsure. $500 E36 318 radiator with built in tank, Near as new condition (6 mths old), made it taiwan if I recall (not shitty chinese one anyway). Brand new radiator cap. $100 - SOLD E30 Tech 1 front and rear kit, Greenish colour, good condition $300 - SOLD E30 Pfl bumpers, decent nick, chrome will clean up well $150 14" Electric fan with Davis Craig thermoswitch $50 - SOLD E30 dash, clean and tidy condition, few little cracks but not bad $100 - SOLD E30 Tech 1 steering wheel, clean and tidy $150 4x100 17" Alpina replicas, very nice condition, one has very minor curbing from memory. Mint 3 month old Toyo T1R 215/40/17's! Includes hubcentric adapters $900 SOLD Recaro's, forget the name (same as Evo 3/ M3 evolution) grey, Average but totally usable condition. Reclinable on approved sliding rails to suit E30 coupe. $300 SOLD 1 week old battery (yeh...) $100 (Cost $150) E30 Battery in boot kit - Complete $80 SOLD Driveline - M50B25 (NV) out of an E34. BLOWN HEAD GASKET . Runs fine and other than the headgasket is pretty good. Lots of new seals, new waterpump etc etc etc etc went into it a few months ago. Includes loom to adapt to this E30, computer etc. New 02 sensor. No flywheel or engine mounts, but everything else you would expect on engine $400. Includes new oil filter and a bunch of random gaskets for it (not head gasket ) SOLD M20B23 single mass flywheel, machined to fit M50. ~6kg. Was cleaned up and resurfaced for clutch during swap. Includes uprated LUK pressure plate, kevlar disc, throw out bearing etc. Consider the clutch only broken in! $250 - SOLD Getrag 260 Gearbox, shifts perfectly, no noises etc. Redline fluids in it. All seals replaced and box cleaned up $400 SOLD Driveshaft, new guibo, new hanger bearing, new bolts and nuts $100 - SOLD Z3 Shifter, with all new bushes etc. $80 - SOLD 3.64 LSD, Less than 40,000 km on this diff! It is mint, Redline fluids in it. Polyurethane mount. Probably the best E30 LSD diff for sale in NZ at the moment! $800 - SOLD 325 halfshafts, new inner CV boots - $80 SOLD E30/M50 Exhaust. Custom made 6-2-1 headers, 2.5" with 1 resonator and 2 mufflers. Ready to bolt on. Sounds the sh*t! $1000 - PENDING E30 brake disks and pads, all four, near new condition. Will match pads to disks $100. SOLD Suspension - Front arms (steel) with lollipops, near new ball links, 95 ksi polyurenthane bushings on everything else. $200 for the pair - SOLD Rear suspension arms & centre, 95 Ksi polyurethane bushes on everything $200 for the whole thing. SOLD Whiteline Sway bars, with polyurethane bushes. 22mm front, Meyle HD links. 16mm adjustable rear $480 SOLD BC Gold adjustable coilovers, Tig'd to E30 51mm front strut. Near new condition, Includes all tools etc & NDT Cert for welding. $1000 - SOLD Front strut bar. Ultra racing, sprayed mat black and tweaked to fit E30 properly $50 SOLD E30 M50 Bits E30 M3 loom covers, as new, tweaked to fit M50. $150 E36 Arms with M5 engine mounts (correct ones, ie one for compression). Mint condition $150 - SOLD Getrag 260 Modified crossmember, E21 mounts (beefier than stock). Mint - $50 -SOLD Renault Clio booster, mint, with adapter to suit E30 master cylinder - $100 SOLD Will add more as I remember. Edited August 8, 2011 by Jacko Quote Share this post Link to post Share on other sites
Sam@TMBMW 0 Report post Posted July 26, 2011 (edited) Real shame to see this, I really enjoyed your progress! How's the steering rack? VV Interested in the G260 too. Edit 1: Picks of the G260 modified cross member please? Edited July 26, 2011 by Sam@TMBMW Quote Share this post Link to post Share on other sites
APT 195 Report post Posted July 26, 2011 You have a message mate! Quote Share this post Link to post Share on other sites
Lucan 196 Report post Posted July 26, 2011 PM'd Quote Share this post Link to post Share on other sites
Venatus 2 Report post Posted July 27, 2011 Pmd also haha Quote Share this post Link to post Share on other sites
*Glenn* 854 Report post Posted July 27, 2011 Sorry to see this happening Chris... especially after all your research & hard work Quote Share this post Link to post Share on other sites
Jacko 2156 Report post Posted July 27, 2011 Cheers guys will get on to the PM's and phone calls now. A number of people want combos and multiple bits. Can be done, its gonna require a few sorry's but sold though. End of the day its gonna have to come down to first with cash, as well as first to pick up. It'll likely start to be parted on monday, maybe later in the week depends on workload in the shop. What isnt sold will be stored, if you can pick it up/pay quickly, it'll save me the hassle of storage so you'll go up the list It sucks to do this, it was my baby for 4 years, but is becoming too much of a money/time/energy pit. Having to pull it all apart again to do the head gasket broke the camels back. Im busy as feck at work, and am off to the states in september (Got a Challenger RT hire car though ), so really dont have time to screw around with it. Sam@TMBMW - Steering rack seems fine, no noticeable play, its armstrong model BTW. The rod ends were done in december, Ill throw in the coloumn with 3 month old flexbush if ya want it Not sure if I have a pic of the cross member, its a standard one, with the LHS Raised ~40mm (memory) using a welded sheet steel "box". Supports the gearbox properly with the different angle the M50 sits on. The rubber mounts were new genuine BMW E21 ones in december. Theyre are larger and stiffer than the stock E30 ones, but have slightly larger threads (requires a minor wipe with a file to where they slot into box) Quote Share this post Link to post Share on other sites
Jacko 2156 Report post Posted July 27, 2011 Edited first post. PENDING - Is wanted, will be changed to sold when paid for/picked up. If your interested in going on the waiting list for a pending sale, PM me and ill be in touch if first ( or 5th in some cases!) one falls through. Quote Share this post Link to post Share on other sites
Jacko 2156 Report post Posted July 28, 2011 Will sell 17" Alpina's, with no tyres, for $500. Looking like it'll start to be parted monday. Quote Share this post Link to post Share on other sites
unstable 0 Report post Posted July 29, 2011 paid for my bits including the booster.... wanna chuck in the rear arms as a freebie??? Quote Share this post Link to post Share on other sites
Jacko 2156 Report post Posted July 29, 2011 paid for my bits including the booster.... wanna chuck in the rear arms as a freebie??? Cheers! Updated first post. Add a box of corona's and the rear end suspension is yours Quote Share this post Link to post Share on other sites
unstable 0 Report post Posted July 29, 2011 Cheers! Updated first post. Add a box of corona's and the rear end suspension is yours done! Quote Share this post Link to post Share on other sites
Jacko 2156 Report post Posted July 30, 2011 (edited) Anyone interested in the shell? with lots of stuff still on it. Am flexible on the price, would hate to see it go to be made into paint cans Plates are still live, it has wof and rego too Dropped some prices in original post, Cant beleive wheels/tyres/gearbox/recaros and swaybars remain un claimed Edited July 30, 2011 by Jacko Quote Share this post Link to post Share on other sites
Lucan 196 Report post Posted July 31, 2011 Pictures of recaros? Quote Share this post Link to post Share on other sites
Jacko 2156 Report post Posted July 31, 2011 (edited) Pictures of recaros? Theyve got a few little rips and tears around the bolsters (I glued the foam back together inside), not suitable for a concours car, but they arent a skanky mess either. http://imageshack.us/photo/my-images/696/p9180307large.jpg/ Theyre on NZKW mounts - http://www.nzkw.com/index.php?main_page=pr...products_id=277 With sliding rails as well. The mounting for the seats was ~$400 for the pair new 6 months ago. I bought the seats 2nd hand off APT awhile ago for ~$350. Edited July 31, 2011 by Jacko Quote Share this post Link to post Share on other sites
Jacko 2156 Report post Posted July 31, 2011 (edited) Forgot to mention, the gearbox has a new slave cylinder on it. Input, ouput, and shifter seals are new. Z3 gearstick includes faux leather boot with M stitching M50 includes a bunch of extra gaskets/orings etc (just went and found them all 5 min ago), and a spare starter. The engine could be stripped further and parted for much more money than im asking (coils/DME etc etc etc). Apart from the headgasket its very tidy, see the pics of its insides in the build thread. Engine and box going together http://imageshack.us/photo/my-images/522/pc020525large.jpg/ Rattle gun and sledge were used removing the rear subframe... Not for putting the engine together And an M50'd E30 is not complete without the M3 loom covers Edited July 31, 2011 by Jacko Quote Share this post Link to post Share on other sites
Jacko 2156 Report post Posted July 31, 2011 (edited) Just dropped the E30 off at the workshop. Drove flawlessly the whole way, im gonna miss it. Sucks, its the same feeling as driving your family dog to the vet to be put down At leasts its internal organs will live on in other E30's Been driving a tidy low k's SW20 MR2 for the last week, was starting to like it, then I drove the bimmer again, and what an epic sack of sh*t compared to the E30, I will own another (v8 touring tickles my fancy ) Am willing to take offers on the shell, with varying degrees of completeness, save it from the scrap metal dealers. Front screen is new, all the glass is good, it is straight (but a bit rusty) and it has 3 pedals, reg and wof Edited July 31, 2011 by Jacko Quote Share this post Link to post Share on other sites
pommy 33 Report post Posted August 1, 2011 Give me first refusal on the recaros! And m50 have pmd!!! Quote Share this post Link to post Share on other sites
Jacko 2156 Report post Posted August 1, 2011 Updated first post with some more solds. Quote Share this post Link to post Share on other sites
Venatus 2 Report post Posted August 1, 2011 Haha there's a lot more I woulda bought off you had my money situation allowed, but got the main bits I actually needed thanks haha Quote Share this post Link to post Share on other sites
E36ShoppingTrolley 7 Report post Posted August 2, 2011 pm'd. also dumb question you may have said else where but what is the width of the alpinas? Quote Share this post Link to post Share on other sites
Jacko 2156 Report post Posted August 2, 2011 Latest round of PM's replied to, If I you havent got a reply from me Im sorry, PM me again, barely have time to scratch my ass at the moment and am getting HEAPS of PM's, little bit over whelming to keep track of it all Updated first post with some more solds. Quote Share this post Link to post Share on other sites
Jacko 2156 Report post Posted August 3, 2011 (edited) Updated first post again. Car should be near totally stripped by lunchtime tommorrow, If I havent sent you a PM with pickup details and I was supposed to Im sorry, PM me again please. Tim has a list of piles of bits too get off, if ya see something missing that you want with it when picking up (ie nuts bolts to attach etc) hit him up, gonna have a massive pile of parts for him to sort through. Any issues gimme me a holla. PM box keeps filling up and making it even harder to keep track of stuff. Will consider offers on Engine + Box + Shell + Wheels + Swaybars, Make me an offer If anyone wants E30 coupe bits, door cards, rear seats, switches buttons, glass, electric aerial, panels, lights etc etc etc Yell out. Edited August 3, 2011 by Jacko Quote Share this post Link to post Share on other sites
Jacko 2156 Report post Posted August 4, 2011 (edited) Taking tenders on the shell. Best offer within 24 hours takes it, PM me. Save an E30 from the metal recyclers Edited August 4, 2011 by Jacko Quote Share this post Link to post Share on other sites
Jacko 2156 Report post Posted August 4, 2011 Updated first post with some more solds. Getrag 260, M50, Shell with heaps on it etc remain. Make me a resonable offer. Quote Share this post Link to post Share on other sites
