m325i 709 Report post Posted July 17, 2015 Pretty sure you need the mk60 DSC which I think is late 2002. Mine is December 02 MY. On a closed road you couldn't get sideways, but it allows way more slip before DSC kicks in. 1 Quote Share this post Link to post Share on other sites
hybrid 1043 Report post Posted July 17, 2015 It also allows you to go balls out around say on a track or wet coner right up to that mechanical grip limit. You can also initiate a slide and it will do a good job of holding it and not letting it oversteer too much. The MK60 is a productionisaed OEM version of the Bosch motorsport unit. certain version can be turned into a full blown motorsport ABS/Traction system. The Georg Plaza 1 series Judd car had this system with bespoke PC software to control the maps and telemetry from the unit. Its also a true stand-alone unit which can be used in other vehicles requiring signal only from source sensors and proxied signals from the DME. 3 Quote Share this post Link to post Share on other sites
m325i 709 Report post Posted November 17, 2018 Not a lot to update, but here are some 'just washed' images 63,000km later. 5 Quote Share this post Link to post Share on other sites
m325i 709 Report post Posted May 5, 2019 New Alcantara dash trim... 3 Quote Share this post Link to post Share on other sites
M3AN 4016 Report post Posted May 6, 2019 That looks good who did it for you and where did you source the material? Quote Share this post Link to post Share on other sites
m325i 709 Report post Posted May 6, 2019 2 hours ago, M3AN said: That looks good who did it for you and where did you source the material? https://cobywheel.com/ 1 Quote Share this post Link to post Share on other sites
m325i 709 Report post Posted May 15, 2019 AFE intake. Haven't had a good chance to wring it out yet, but pretty happy with the sound, (i.e. purpose of install). 1 Quote Share this post Link to post Share on other sites
qube 3570 Report post Posted May 15, 2019 5 years now! not bored of it yet? haha Quote Share this post Link to post Share on other sites
m325i 709 Report post Posted May 15, 2019 27 minutes ago, qube said: 5 years now! not bored of it yet? haha Best motoring decision of my life. The hype is real. No road car comes close for the money, (and even a lot more). 1 Quote Share this post Link to post Share on other sites
str8_6 275 Report post Posted May 15, 2019 Did I miss the part where it went from SMG to manual? Quote Share this post Link to post Share on other sites
m325i 709 Report post Posted May 15, 2019 (edited) 52 minutes ago, str8_6 said: Did I miss the part where it went from SMG to manual? Oh yeah. It's manual now thanks to HellBM Edited May 15, 2019 by m325i 1 Quote Share this post Link to post Share on other sites
str8_6 275 Report post Posted May 16, 2019 Oh nice! Prefer it to the SMG? Quote Share this post Link to post Share on other sites
KwS 2425 Report post Posted May 16, 2019 But isn't SMG manual? ? Really though, that intake look real nice. Bet it sounds glorious up the rpm range. 1 Quote Share this post Link to post Share on other sites
m325i 709 Report post Posted May 16, 2019 I actually really like SMG (with CSL tune) and wouldn’t hesitate to buy another one. Both have their charms. I’ve never gone back to SMG so maybe that would change my mind? SMG sucks is a classic internet meme. 3 Quote Share this post Link to post Share on other sites
m325i 709 Report post Posted August 22, 2019 Incoming - freshly ceramic coated... 4 Quote Share this post Link to post Share on other sites
JohnM575 112 Report post Posted August 22, 2019 @m325i those look great! Where did you end up buying them from? Quote Share this post Link to post Share on other sites
m325i 709 Report post Posted August 22, 2019 28 minutes ago, JohnM575 said: @m325i those look great! Where did you end up buying them from? Thanks! Looking forward to mounting them. - CM Wheels Quote Share this post Link to post Share on other sites
m325i 709 Report post Posted August 24, 2019 (edited) PS4s placebo ride a bit smoother than PSS? Edited September 25, 2019 by m325i 8 Quote Share this post Link to post Share on other sites
Bandit 194 Report post Posted December 4, 2019 (edited) On 8/23/2019 at 10:49 AM, m325i said: Incoming - freshly ceramic coated... VMR703's in 18 or 19? Edited December 4, 2019 by Bandit Quote Share this post Link to post Share on other sites
m325i 709 Report post Posted December 20, 2019 Happy Xmas to you? 1 Quote Share this post Link to post Share on other sites
qube 3570 Report post Posted December 23, 2019 Very nice knob Quote Share this post Link to post Share on other sites
m325i 709 Report post Posted April 23, 2020 Paint is 95% mint, and did want to do a full polish for 100% mint-ness, but have only had chance to clean and wax. I did repaint the CMP subframe reinforcement grey. Here are some pics... 6 Quote Share this post Link to post Share on other sites
KwS 2425 Report post Posted April 23, 2020 I love how the blue pops out in those photos ? 1 Quote Share this post Link to post Share on other sites
JohnM575 112 Report post Posted April 23, 2020 2 hours ago, m325i said: Paint is 95% mint, and did want to do a full polish for 100% mint-ness, but have only had chance to clean and wax. I did repaint the CMP subframe reinforcement grey. Here are some pics... Who installed the CMP reinforcement kit for you? Way to futureproof the rear end! 2 Quote Share this post Link to post Share on other sites
m325i 709 Report post Posted April 23, 2020 (edited) ^ HELLBM installed the CMP kit (and plates). HellBM has done all the work on the car in fact. Future plans... perhaps a 4.1 diff and seat upgrade?!? (BTW that plate is tongue in cheek - I actually like SMG and would buy another in a heartbeat #SMGismanual) Edited April 23, 2020 by m325i 3 Quote Share this post Link to post Share on other sites
