Jump to content
Sign in to follow this  
m325i

E46 M3

Recommended Posts

45 minutes ago, m325i said:

Haha ditto! 
/r/bmwcirclejerk 

(did my lights look too bright?)

Didn't notice the lights, just those big ol’ M3 arches

  • Thanks 1

Share this post


Link to post
Share on other sites

I was a big wax/sealant guy. Finally committed to a ceramic coating. Gotta say on first impression I can see the appeal.

Paint wasn't too bad as I had polished it years ago, but did have water spotting and needed a polish. I wasn't going to chase the last 5% - Polishing is a nightmare. Even blasting through it it took ~5-6 hours. 

I used;

  • Carpro Fixer (for some 'worse' areas)
  • Carpro Essence all over
  • MF cutting pad
  • Finishing pad only on the bonnet where I went pretty hard to get the water spots out. 
  • CQuartz UK 3.0 + Reload

It's a dream on all the black trim, (PDC sensors look brand new!), wipers etc. 

It looks the best it ever has, so looking forward to the long term review!

It has convinced me that I would put a coating on a 'non corrected car' - maybe just a quick polish. And I would live with some locked in swirls (on say a white car) to get the coating benefits.

Going to cull my detail cabinet now...

Screenshot 2022-12-21 at 7.30.00 PM.jpg

Screenshot 2022-12-21 at 7.30.51 PM.jpg

  • Like 5

Share this post


Link to post
Share on other sites

Nice work looks mega.  I shelled for OCD treatment on my carbon black - been very happy with result and resilience.

need to do it myself for the daily drivers…….

  • Thanks 1

Share this post


Link to post
Share on other sites
11 hours ago, NUSTAD said:

Nice work looks mega.  I shelled for OCD treatment on my carbon black - been very happy with result and resilience.

need to do it myself for the daily drivers…….

Yeah paying for a polish is money well spent. Coating is pretty easy to apply though. 
 

Driving around in a freshly polished car is always quite fascinating. Within an hour I had two people literally wind down their windows and compliment it. 

  • Like 1

Share this post


Link to post
Share on other sites
2 hours ago, m325i said:

Yeah paying for a polish is money well spent. Coating is pretty easy to apply though. 
 

Driving around in a freshly polished car is always quite fascinating. Within an hour I had two people literally wind down their windows and compliment it. 

Good to hear - it looks amazing. Keeping a car always clean is the best mod.

Might explore ceramic coating after I get panel / paint done.

  • Like 1

Share this post


Link to post
Share on other sites

Nice work - I am about to jump on the Carpro band wagon and looking at using Reflect as a finishing polish and then a coat of C-Quartz. I've got some Mezerna 2400/Chemical Guys to use as light compound and then top up with Reflect using their Gloss pad.

I haven't used a MF pad before as i've been using the Orange foam pads. Anything to watch for with an MF pad? And any reason you went straight to Essence? 

Cheers

  • Thanks 1

Share this post


Link to post
Share on other sites
55 minutes ago, Sammo said:

Good to hear - it looks amazing. Keeping a car always clean is the best mod.

Might explore ceramic coating after I get panel / paint done.

Definitely do it. That’s the easiest time to 

  • Like 1

Share this post


Link to post
Share on other sites
43 minutes ago, isis said:

Nice work - I am about to jump on the Carpro band wagon and looking at using Reflect as a finishing polish and then a coat of C-Quartz. I've got some Mezerna 2400/Chemical Guys to use as light compound and then top up with Reflect using their Gloss pad.

I haven't used a MF pad before as i've been using the Orange foam pads. Anything to watch for with an MF pad? And any reason you went straight to Essence? 

Cheers

Nothing to look out for as far as I know. 
Paint wasn’t too bad. I read that with a MF cutting pad and Essence actually cuts quite a bit and is a primer for Cquartz. 
Some sections I cut first though. Results were pretty good with one step though so I accepted 90-95%. I would love to see how perfect you could get it if you did a full 2 step though. 
 Quartz definitely darkens the paint colour a little. 

Share this post


Link to post
Share on other sites

@m325i spotted you giving it the berries past Diamond Takeaways as I was en route to London via the airport, sounded good coming on cam 😁

When you say MF pad do you mean foam as compared to wool?

I went down the Rupes rabbit hole a few years ago and run Farecla product on rupes pads and DA in a professional setting - I'd be interested to see if the CarPro range compares 

  • Thanks 1

Share this post


Link to post
Share on other sites

~203km

Thanks to Hell BM, a few maintenance items that have it driving like it’s 15 years newer. 

- drive shaft bearing, new guibo (2nd time it’s been done. Was trashed) 

- all gear selector bushings etc. (existing e60 short shifter) 

- engine and gearbox mounts

- new boot struts!!! 
- coded out LED errors. I’m convinced people pay a lot for new cars for that “hard” LED indicator flash. Certainly modernises it. 
 

The drive train feels (relatively) smooth and awesome. 
❤️❤️❤️❤️❤️❤️❤️❤️

 

Screenshot 2023-06-11 at 6.57.53 PM.jpg

Edited by m325i
  • Like 11

Share this post


Link to post
Share on other sites

Looks amazing as usual, great to see you still have it.

  • Thanks 1

Share this post


Link to post
Share on other sites
1 minute ago, hybrid said:

great to see you still have it.

Learned my lesson 😝

Share this post


Link to post
Share on other sites
2 minutes ago, m325i said:

Learned my lesson 😝

haha, after many years youll be glad to know the e30 will be getting a total repaint this year. 

  • Like 3

Share this post


Link to post
Share on other sites

Looking lovely, making good use of our limited sun, although the plates look naff and detract from the overall appeal.

I'm never sure why people go to the effort to obscure otherwise public plates, especially when they're already visible in the thread. Nothing Gained I'd suggest... ;)

 

Share this post


Link to post
Share on other sites
35 minutes ago, M3AN said:I'm never sure why people go to the effort to obscure 

 

Hey bro. 
Please let me know where my plate is displayed in the thread. 
(I’d just rather a small amount of anonymity/deniability) 

You obviously made your bed a decade or two ago 😆 

Share this post


Link to post
Share on other sites
44 minutes ago, m325i said:

Hey bro. 
Please let me know where my plate is displayed in the thread. 
(I’d just rather a small amount of anonymity/deniability) 

You obviously made your bed a decade or two ago 😆 

Last photo on page 5

  • Like 1

Share this post


Link to post
Share on other sites
1 minute ago, Harper said:

Last photo on page 5

Thanks. (But fake)

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...