Jump to content
e46v12

My E46 V12 6speed swap

Recommended Posts

Hey Team 

Another long break between post, so managed to sell the black 330ci to a nice gentlemen who drove all the way from te puke to pick it up.

Short vid made by my friend and exhaust sound near the end.

So have also managed to get the n62 oil pump stuff sorted for the m62tub46 motor. I had a few hiccups with the sump pan fitting correctly but we got there in the end.

Also had to modify the cross member which the certifier was happy with.

P1040217.JPG.1b33b20f1e49337e7346650f1a84767c.JPG

P1040215.JPG.0c75a0674682feec3d543863d681326b.JPG

P1040220.JPG.56df7ac2c6cb4f1c451f8d4b236935ab.JPG

This was the 1st change to the n62 sump

P1040227.JPG.52afa0efb1e32fee26eea8ab791d8a93.JPG

P1040228.JPG.8f0cc51ed5208285975584cf6ff564d8.JPG

P1040222.JPG.7656bdac36dac48aa4244b5bb5932653.JPG

P1040223.JPG.70409e0c5af27f9c05626b72e2e6656c.JPG

Shorten tubes and oil pump shaft

P1040230.JPG.739f2d476c8ea858b77898f90b8bd6fe.JPG

Had to make 6 new 10mm spacers to raise the pump up and slot the oil pump bolt holes to accommodate taller spacers.

P1040233.JPG.044bba47180d9bcc6c77addebc0e1fbe.JPG  

P1040234.JPG.48bdc593a518c67a434021dad002854d.JPG

The final Sump pan we ended up cutting the front off the n62 pan and reusing the X5 front 1/4 due to needing the power steering and air con pump tensioner brackets.

P1040240.JPG.0f436155ca96cde9672362c0b579dcc2.JPG  

P1040238.JPG.1fefe45b685c38a6b0421f31cc1f0d2e.JPG

All bolted in on the motor now i reused the m62tu oil pump chain and sprocket.

P1040235.JPG.8865a936a149de0f2311a6ea1924be73.JPG

P1040237.JPG.941481763321dc91cd6a22c71ce87e20.JPG

P1040243.JPG.5ecf6a8f62851bac5cbc331ccad992e9.JPG

P1040244.JPG.a7ee44910c69f8c05adbecc6fd44d2e3.JPG

Bolted the Flywheel and clutch it on

P1040246.JPG.69e8ee9742854abff7bdc4e45dfd09d5.JPG

P1040248.JPG.23888f076dd85699fe0b2935a0f63fb4.JPG

Tested fitted into the engine bay due to me needing to find if the n62 dip stick cleared which it does but needs to be shortened by 120mm 

Plenty of clearance underneath too.

P1040249.JPG.65a5d3c545d001a5c9093b25c90616a7.JPG

P1040250.JPG.2418b45ca9def0ec305dbeaa2ff6a0b9.JPG

P1040251.JPG.a633c30b51d8fdb50c31f581151cdcc3.JPG

Not long to go.

Thanks Team

 

 

 

  • Like 5

Share this post


Link to post
Share on other sites

Any reason you went with a self adjusting clutch?

Share this post


Link to post
Share on other sites

Great work, any reason why you didn't go for one if the off the shelf conversion kits? 

Share this post


Link to post
Share on other sites

@Cement Thanks though i cant take the credit for the work as it was all done from my engineer.

@Eagle I had the Jb racing flywheel lying around and it took factory a pressure plate. I also had both spare clutch disc and plate so figured i would used all the parts up.

@Gaz are you talking about the Cybul and Adamat ones? I did think about it but quite liked the rear sump idea and just wanted to try it really. 

  • Like 1

Share this post


Link to post
Share on other sites

How much slimmer is the f series shaft? Did it slide straight on? I'm about to start a m62b46 swap on my e36

Share this post


Link to post
Share on other sites

@Gaz its noticeable slimmer, definitely helps for fitment of the headers as every mm counts.

I had to get the top U joint swapped over to the e46 one ( i think e36 are the same) and i had it shorten by 20mm i think. 

Oh nice be nice to see one in a e36 too.

  • Like 1

Share this post


Link to post
Share on other sites

Hey Team

Happy new years

Been a while but have got so much done and a few plan changes.

Certifier has popped in, seen the drive shaft hoops and he is happy with the outcome.

P1040098.JPG.ffc2d7c65db4bb4554f33a4f5d81aa37.JPG

P1040099.JPG.aa9fc4a1129062fbf73632ab0493c1d7.JPG

Heaps of little jobs done to get the motor finally running.

Relocated the heater water valve, DIY oil catch can, relocated dip stick, welded O2 sensor bungs in, coolant and heater hoses, finished off the rear end of the exhaust, AC lines and other small stuff.

P1040253.JPG.5c0807e70e7beff35590ed1a31eb1049.JPG

P1040255.JPG.f46b705ba49e37b233c2a0a770a9bdfa.JPG

P1040258.JPG.e1dac0ef391ac3c32ebf2efa683f6a04.JPG

P1040262.JPG.a6c6ab3b11c6001a8198e4c92c554794.JPG

P1040263.JPG.4d5572dce8373c7212c7a6b232d566db.JPG

P1040269.JPG.77428368a89c0ea6e58f441a790ec490.JPG

P1040270.JPG.b2e24445ca26f69d588b4075ed763a11.JPG

So I have had the motor running on the hoist for a good 10- 15mins to bring up to temp checking for any leaks or issues.

But ran like a dream, custom oil pump has pressure so very happy it has worked out. Cant wait to take it for a drive.

Also a massive update on the v12 swap, Nelson at Hartley Motors has started on the intakes using 3d printing to make the runners which will be glued to the alloy flanges, very light when I held them in my hands and look very cool.

327648794_1392216261314132_8559515201777701345_n.thumb.jpg.968279e731784e9e5e6d61467b06af1f.jpg

327327082_1195101654545561_1602584011036692719_n.thumb.jpg.ed79d623e15be139f2c9873f119b1ee3.jpg

326794997_641604407764893_8414494268319088005_n.thumb.jpg.78b5464db2ce83859dca0c7bbc083499.jpg

327161334_874346157044227_4729336987590803036_n.thumb.jpg.2f8cd274c2049662d48c75eab67bf9cb.jpg

But big changes in the direction with the builds now ( I know I change my mind quite often)

I'm going to twin turbo the v12 motor now instead of ITB's and I will be swapping the v12 in to my X5 4.6is manual.

The opportunity popped up which I thought would do more justice for the M3 rolling body.

I will be doing a S85 v10 manual swap into it :)  Cant wait to get a start on this swap.

Thanks Team.

  • Like 3

Share this post


Link to post
Share on other sites

Hey Team 

So Things are coming along nicely, Picked up a full manual swap from an e92 M3 and pretty much a complete S85 from a M6 ready for the E46 M3 project.

Cant wait to get this swap started.

P1040272.JPG.ec2947eaa34b90163258d464e54abadd.JPG

 

P1040273.JPG.93bc1a6d9bdaf5621bcc2eb33577e324.JPG

P1040274.JPG.21a26484aa8574bd4ad71b4f580be518.JPG

  • Like 8

Share this post


Link to post
Share on other sites

just being nosy --------- what kind of $$ was on the s85 engine?   Asking for a friend....

  • Haha 1

Share this post


Link to post
Share on other sites

Hey Team 

So finally got the e46 v8 swap up and running, 

We had a small bimmer car meet over the weekend here in Palmy and I managed to get the car going and took it to the meet. It was great tester for the car and man was is it quick.

I did change the intake to an OTR setup, which meant I had to change the radiator which also meant i had to install a fan switch. It all actually turned out really good. 

Booked in for a cert in late April too so hopefully get cracking onto the M3 v10 swap soon.

P1040277.JPG.48ec7814ce5648565122f1714310dfc4.JPG

P1040278.JPG.7ddc489a955e8bd4aff5267974ce507a.JPG

P1040279.JPG.4d1493745efcc51bda5560edd3654fee.JPG

P1040280.JPG.fc965bf1e11dd21f8231f979be51bf25.JPG

P1040281.JPG.811a410a369c482a3c0abdbb53207f47.JPG

short vid of exhaust

 

Edited by e46v12
  • Like 8

Share this post


Link to post
Share on other sites

Love the intake, custom made?

Share this post


Link to post
Share on other sites

@Gaz its a OTR (over the radiator) intake made by x-air for a holden commodore. If you google OTR intake you'll see heaps of different styles 

  • Thanks 1

Share this post


Link to post
Share on other sites

Any progress updates on the V12? I've been thinking about the V12 swap for a while and can't wait for more progress. Excellent thread. 😉

Share this post


Link to post
Share on other sites
9 hours ago, zenwafle said:

Any progress updates on the V12? I've been thinking about the V12 swap for a while and can't wait for more progress. Excellent thread. 😉

Hi @zenwafle no real updates but im not sure if your read the post as im putting the v12 into my e53 X5 4.6is and twin turboing it instead now. The v10 will be going into the M3 now.

Here are some pictures of the v12 intake runners being made. which will then get a plenum over the top.

346094412_3580213285559261_2745255771251632833_n.thumb.jpg.546e75719e4fad4c713c7fb27e6d399f.jpg

346104138_1258770388066732_1366999471762815774_n.thumb.jpg.5fd43802dfa5c360054511423998b580.jpg

346101476_1551056538753152_3167465377713837995_n.thumb.jpg.a09a013200466d022cdd0868e7ed29c7.jpg

  • Like 2

Share this post


Link to post
Share on other sites
3 minutes ago, e46v12 said:

putting the v12 into my e53 X5 4.6is

 The inspiration? What awesome projects - V10 E46, and V12 E53 will be mental!  

Share this post


Link to post
Share on other sites

@Kees if only i had a Mclaren motor :) but yeah they will be cool once ive finished building them. Im also keen to do another roadie up to Aucks at some point to stretch the legs of the e46 4.6is swap. 

  • Like 1

Share this post


Link to post
Share on other sites

Hi Team long time no post.

Sorry been busy with business move, other side projects and abit lazy in the posting.

So plans have changed a bit, The v10 will be saved for a nice oldschool bimmer, not sure which one yet.

E46 M3 will be getting a N73 v12 motor from this beast.

gallery carousel 1

I will be on selling the m73 stuff to fund this swap.

Also in the pipe line have this e46 330ci coupe. 

P1040297.JPG.bc0f9b544b1d4bfc4c310e7c5776dda3.JPG

Looking at dropping my last 4.6 motor into it. Have an Elate supercharger adapter plate, water to air cooled. 

Modified AMG supercharger and 420g 6 speed box with my spare M3  rear end.

Rear subframe plates and driveshaft hoops welded in. Stainless headers, engine mounts and gearbox x member.

Just sorting out the oiling by modifying the x5 one. 

P1040292.JPG.bf15a1eb8cad75b18c9def93638e056c.JPG

P1040293.JPG.4be6fc8a9006649ab785cc0da4872002.JPG

P1040291.JPG.1bff720803bcc12c3e2e42aa9665d2cb.JPG

P1040295.JPG.7c00f6d2c05f3ba88c0cf8f901252fc2.JPG

P1040296.JPG.f69be1a73ebf6a72528744fe6fd02356.JPG

P1040298.JPG.81cabd6b8bd53c295fe01998c46ee412.JPG

P1040299.JPG.915d826bf9e243df081a097aead67c58.JPG

P1040300.JPG.2e25d80b7f3643e8008d4bdab25f6b38.JPG

P1040301.JPG.81686081d0e8978ee15f5e66e61ab96d.JPG

Cant wait to get this thing running.

Thanks

 

 

 

 

 

 

  • Like 4
  • Thanks 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...