New-star 0 Report post Posted June 11, 2018 (edited) Hi all The mosfets in my ecu are faulty and need to be replaced. im not confident with my soldering abilities, can anybody recommend somebody in Auckland who would be able to replace these for me? thanks for the help Edited June 11, 2018 by New-star Quote Share this post Link to post Share on other sites
M3AN 4016 Report post Posted June 11, 2018 Any work on a board like that requires some specialist skills. You're going to need to remove the ECU which will disable the car so it might pay to cast your net wider than Auckland. I know Get Electronics in Christchurch do work like this but I'm not sure if they're available. If you know what parts you need and can source those then a mobile phone repair shop might be able to help if they simply need to desolder old and solder new components. Quote Share this post Link to post Share on other sites
Jacko 2157 Report post Posted June 11, 2018 (edited) Can you throw some pics up and p/n of the mosfets (if you have them), electronics guy at work might be keen for a cashy Edited June 11, 2018 by Jacko Quote Share this post Link to post Share on other sites
B.M.W Ltd 950 Report post Posted June 11, 2018 Have a talk to Shane Ph: 0274722287 Allan Quote Share this post Link to post Share on other sites
New-star 0 Report post Posted June 12, 2018 Thanks for the reply all. i have attached the photo of the mosfets and the p/n it seems to be pretty straight forward, I just don't have any real soldering experience. Quote Share this post Link to post Share on other sites
*Glenn* 854 Report post Posted June 12, 2018 Who diagnosed the fault ?? Quote Share this post Link to post Share on other sites
KwS 2425 Report post Posted June 12, 2018 Something you might do @Michael. ? 1 Quote Share this post Link to post Share on other sites
Michael. 2313 Report post Posted June 12, 2018 33 minutes ago, KwS said: Something you might do @Michael. ? I sure could. Quote Share this post Link to post Share on other sites
New-star 0 Report post Posted June 12, 2018 Hi Glen, I did http://www.n54tech.com/forums/showthread.php?t=53561&highlight=Changstar thanks all for you assistance Quote Share this post Link to post Share on other sites
Jacko 2157 Report post Posted June 12, 2018 Looks easy, if you need em done I can take em to work and get our guy to do it (hes fn good ) flick me a pm if keen Quote Share this post Link to post Share on other sites
135iN54 0 Report post Posted November 4, 2020 On 6/12/2018 at 5:37 PM, Michael. said: I sure could. reckon you could still do it now, ive got the same issue with my ecu. Just ordering the parts i need someone whos good with a solder! Quote Share this post Link to post Share on other sites
Herbmiester 927 Report post Posted November 4, 2020 I had mine done a year or so back and I used a TV repairman who know how to solder. Quote Share this post Link to post Share on other sites
promo 93 Report post Posted November 4, 2020 happy to help if anyone requires soldering. i do this all the time. especially reballing GPU. will do for free if you have the mosfets. Quote Share this post Link to post Share on other sites
promo 93 Report post Posted November 23, 2020 Just finished replacing mosfets on another dme. Only one was blown (open circuit) but replaced all 6. 2 Quote Share this post Link to post Share on other sites
