Silver Fox

Happy Birthday Muppet.

The cage won't comply with the new rules, don't know if you could get an exemption owing to it being previously logbooked?

You been drinking too much again Oli, I presume you mean E30, not E3?

First time anyone has. Did a work trip to Whangarei.

Happy Birthday Shelley.

could try this lot, $180 for new glass. $270 supply and fit. Mobile Service. http://www.trademe.co.nz/a.aspx?id=356020751

Give me a yell if Brent can't help, I'm sure I can.

Andrew, I've seen plenty of those round plugs, but don't have any here, Brent or Marty should be able to help. Can't you just change the tps, or even the whole throttle body? I have both of those.

Seems to be enough room, still haven't got the block I'm using in there yet, got to do a rebuild on an E34 3.5 and then bolt it all together and drop it in.

Hoping for 240 to 250 down the back straight.

BMW ECU with a small piggy back to handle air and spark?

That's what I'm hoping for, basically something to improve the M30's already impressive torque and power and give a bit more top end. Not intending to go for a high revving thing, the M30's best down low and mid range, so just enhance that a bit I hope.

New holset turbo custom built by MSE ( steve M ) polish front cover with 3 inch intake, oil cooled only, .63ar rear housing with t3 flange. model no: H1CN

Update pics.

You'd have to wonder about the mind of someone who'd come up with an image like that, and then admire the effect and wonder how it is achieved? Don't try to focus on it too quickly.

+1 for Jono. Good value.

Call Gavin at Euro italian

If you can find someone who will ship them, get them sent individually. I get stuff sent over USPS about 10 to 12 kg boxes, cost me $55 US per box, standard rate, here in 4 to 5 days usually, never had any problems. This way your cost per box will be below the $400 gst and tax threshold.

Some expensive hillclimb fun.

Happy Birthday Ollie, see you at the weekend?

http://www.trademe.co.nz/Trade-Me-Motors/S...n-354594470.htm

It's only 2 x M20B25's side by side?

$100 to $150 if in good cond.

Good idea. don't see why not.

4.6 Fire extinguishers: Important Notes: BCF extinguishers are no longer accepted under this safety schedule. Advice may be sought regarding the disposal of these extinguishers from fire extinguisher agents or the MotorSport NZ office. Servicing requirements for all extinguishers are currently under review by the fire protection industry. MotorSport NZ will issue details of the revised service requirements as soon as possible. (1) Requirements: A manual (hand-held) or a mounted (plumbed-in) extinguisher shall be fitted in accordance with the Extinguisher Requirements Chart A4.6.1 as detailed in Part Two of this Schedule. (2) Approved types: Dry powder or Foam type stored pressure extinguishers compliant to one of the following standards are approved: · New Zealand Standard NZ 4503 including updates, and/or · Australian Standard AS 1841 (3) Service requirements: (a) All approved extinguishers with pressure gauges shall: (i) Be subject to periodic inspection by the competitor to ensure contents pressure and approximate weight requirements are met, and (ii) Every five years (from date of manufacture) the units shall be subject to service audit by a recognised Fire Protection Company who will label the unit, detailing the company’s name, contact, and service date. ( All approved extinguishers without a pressure gauge shall be subject to annual service audit by a recognised Fire Protection Company who will label the unit, detailing the company’s name, contact, and service date. Schedule A MSNZ Manual 34 Online Edition - 20 - App 2.02 Sch A 2010.doc Latest Amendment: 34073 28 Jan 2011 (4) Mounting: Extinguishers shall be installed in accordance with the following: (a) A retaining system incorporating quick release metal fastenings/straps, or material of equivalent strength (ie Kevlar), secured to the structure of the vehicle by a minimum of two 6mm bolts with panel washers and locknuts. ( Hand held extinguishers shall be positioned within easy reach of the occupant/s while normally seated (not mandatory for single seaters); © Plumbed-in systems shall have the triggering device accessible/operable by the occupant/s whilst normally seated