allan

Their seems to be good contact on the seal looking at the marking present in the photo. Have a look at the condition of the paint in the water channel also. Could be a chance of rust under the paint as their is a join in the same area concerned I believe.

T allanson Interesting how about 7.7 per 100k. The trip read 698k and still showed 46 left when I put gas in it tonight. E46/5 speed manual compact with m54b25 a 6 pot. Does a 90k round trip a day of that a third is town running.

The article mentioned the timing chain and their guides being a weak point. Plus due to position a major job to replace so the engine may need to be removed.

E90 320 diesels have timing chain issue's have been told.

Hi not up with the lastest bimmers so bear with me an F80 is a sedan as an E90 is. The e92 is the coupe model what does that relate to in the f series if any.The reason as you have found is the f80 will not have the mechanism to tilt or raise the seat forward. Can you not use the mechanism from the e92 seats.No doubt every thing is electric which adds another complication to it. As Nick has touched on the f80 and e46 have converted a set of e46 Msport sedan seats to fit a Ti by mixing and matching the parts required although these ended up being manual adjusted. As for weight I believe their was some were around 12.kg odd difference between the electric and manual seat. Best of luck with it can be a pain in the you know were let us know how it all turns out.

Hi have a look under the passengers seat at the wiring and how well it is secured for the seat belt tensoner and passenger mat these are known to course the problem you mentioned.

HI no expereience with these but you are correct using bmw fans 03 x5 E53 3.0d June the part number comes up as 64546921382. Using the info button it was only used on the M57 and M57n 3.0d. The petrol one had 64546921381 as a part number but was used in the M54 3.0, M62 4.4 N62 M62 4.6is and N62 4.8is. Pelican parts has both listed as complete units only shroud, motor and fan cover around the $563 US mark. Would be using a meter and checking the circuit and other items as that looks like it could get expensive real quick.

If you go the battery replacement route make sure you get the correct battery and the treminals are at the correct angle so they slot into the holes in the circuit board. Have a look on ebay and their are complete blank keys for sale. Only need to get them cut and swap over the transponder.

Thought their was a wreck up for auction Manheim or such not long ago.

something like this

Both Brent and Glenn have years of dealing with bm's in every state possible so would heed what they have to saw. But try BMW fans its a parts cat and will give you some idea of what goes were. http://bmwfans.info/parts-catalog/E60N/Europe/530i-N52N/R-N/apr2007/browse/bodywork/. Also use the search section believe someone else tryied what you are doing and it did not end well. But best of luck with it.

HAVE YOU TRIED THESE GUYS NZAD NZ Automotive Distributors Ltd Website Directions 28d Moselle Ave, Henderson, Auckland 061 0800 556 923

Try these guys [email protected] +64 (0)4 232 7543 Appears they have a 73 3.0CSL being restored.

NZ new rego Jan 2002 as a 316 colour Topaz blue. Work carried out all certified. Engine transplant N42 4cyl out M54B25 in 6cyl 2.5ltr, 5 speed manual gearbox. Drive shaft shortened and hoops fitted a diff up grade to medium case 3.15:1 ratio, brakes and suspension 325 m sport also.M sport body kit side skirts, door kick panels, front & rear bumpers, rear PDC, Clear park and side lights, 2004 red tail lights and tinted exterior mirror glass with wide angle section. Interior seats upgraded to leather M sport, cluster rings fitted.M sport Multi function steering wheel with cruise and radio control, Hood lining A,B,C pillar trim has been changed to the black M sport. Dash trim and door trim is Black cubic, auto dip mirror, torch in the glove box.Centre console M sport with fold down arm rest also zhp gear lever. This was a project car have all receipts for moneys spent body has 221,300k motor 134,300k's $6,500.00 The link will explain what has been done any questions please ask car located Foxton https://www.dropbox.com/s/a5p1h6fr4k3pmes/Tim up to date project 3 (3).ppsx?dl=0 rear end.doc

OK problem solved reading the last post also be aware their was a problem with the wiring to both the passengers seat sensor and the seat belt tensioners.This also coursed the air bag light to come on something to do with the wiring giving up and braking a replacement loom was made available not sure if still covered.

Pelican show two a Siemens $99.50Us and genuine for $167.50 these don't have the motors.If of any help a superseeded part number 51357184745 is being used. When replacing the one on the e39 advised to clean the guides and spray .them with Teflon to provide a smooth surface for the glass to slide over

Try these they are from BMW fans parts cat. Check the part numbers and click on the i. for more info it will let you know what other models used the parts as well http://bmwfans.info/parts-catalog/E38/Europe/728i-M52/R-A/may1999/browse/engine/cooling_system_fan_fan_coupling/#1712058_1 http://bmwfans.info/parts-catalog/E38/Europe/728i-M52/R-A/may1999/browse/radiator/radiator_expansion_tank_frame/

Welcome to the surprises that e46 have for you. The back mounting securing clips brake real easy as they get old and the front one not far behind as you are now aware. Three ways I have seen people fix thises. 1.combo silicone sealer and cable ties, 2. A friendly wrecker and get them for free 3. cough up the $$$ and buy them new. As for the clock issue it can be displayed on both the cluster and radio at the same time as mine was but by fiddling with the right knob on the cluster as you mentioned it can be altered.

Dammed if you do and dammed if you don't comes to mind. Would you achieve much by loosen the lower window track and being able to move things a little? . Other than that it might be a window removal or can you lower the window and the regulator into the bottom of the door to give you more room.

The cable being black should'nt matter just the way it is attached to the door handle mechanismThey appear to have changed Sep 2000 mine are yellow but from a 2002 sedan. Might be easier if you look at trying to remove the door handle mechanism from the car to make refitting the cable easier and know that it want come adrift again. By what you are saying their isn't any room to move. Looking at the mechanism it appears to be held in by one bolt and located in a V shape a the other end. Also their should be some holes that line up with these parts in the door. Play around with the window height to get the best clearance you can.

A couple of photos that might help what i'm talking about. first locking tab on cable, second part in correct place, third part depressed allowing cable to be removed. Once this is depressed it appears it needs a little help to return it.

Ok must be something broken or miss aligned as the one i have their is no way the nipple on the end of the cable will come completely out of were it locates because of another part, red arrow in your blue circle even with the outer cable out of its locating place the X or other red arrow. Hold the press left red arrow if this part is depressed it will allow the nipple to be removed.It appears to be spring loaded under white plastic bit check the spring to see if not broken. Has your cable still got its little securing tab or is it broken hence the cable tie to hold it in place.

Their are two cables going to the door lock one from the handle mechanism you have shown the other goes to the interior handle to open the door. On the lock I have their is a white plastic piece that has a slot and hole for the end of the cable to slid into. Think when I changed the compact one I had to mess around with the window channel to give one a little more room it was a pain. Have a look here any help best of luck. https://www.google.co.nz/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&ved=2ahUKEwiql6DM5pHcAhWBNJQKHRv6BUwQjRx6BAgBEAU&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3D3laNmsAbKrM&psig=AOvVaw3jjcK9xm4jwfp-LGu4fUXo&ust=1531218221190235

https://www.bmwblog.com/2017/04/27/bmw-wireless-charging-530e-2018-inductive-charging/