musccoo

Hi guys, I need to replace my valve cover studs which are m6x35. Is there anywhere in Auckland where i could get some with internal hex heads just to make insertion and removal a heap easier..like this pic cheers

Lol thought it sounded weird. New... $$$$

An impact stud extractor would make my life very easy if anyone has

Really? You mean just hack a groove in the top of the bolt and turn? as easy as that eh..

Hey guys, So found out the hard way when changing my valve cover half the studs were stripped and didn't realise till i tried to start torquing the nuts on and to my surprise they decided to spin. Does anyone have a stud bolt remover I could borrow? Needa get those bastards out Cheers

110 euro 90 euro for shipping which is 290. I got a heap of other stuff too so made it well worth it.

Bought some tweeters and would ideally like to mount in the factory pods inside the mirrors, but I don't have them... any floating around out there?

schmiedmann.com, mucho cheaper than $350, unpainted though

Same style but smaller so no they don't fit

2 center caps of the smaller size for 14s one missing the black rubber bit unfortunately - $80

So one of my sunroof rails was broke so sunroof wouldn't pop..so I took it apart sourced a new one and put back together and now the sunroof works like new....EXCEPT when I pop the headliner bit into place. It jams it and it needs me to push it with my hand to get it opening and closing. I can't see where it's catching or why...very annoying Has anyone had this problem/know how to fix?? Cheers guys

Sunroofs are hard work, anyone able to part with a rust free one? Mine is hiding a certain death..

I got two center caps for them if your in need..

Did you bake the rocker cover to cure it...what paint did you use?

http://dungeonmotorsport.com do a spacer kit

Can anyone recommend a good quality place that does injector servicing for a good price?

Wondering if anyone has a inline fuel pressure gauge they no longer need or use, otherwise ill buy the bits and make one up.

Yea its 6spd man

Would a workshop be able to test if I took it in? Looks like a might need a guage...

Thanks Ray thats mint!

So my FPR in my e30 was leaking so I took it off to discover a munted O-ring. Now I have it off the car I'm wondering is there an easy way to diagnose if the FPR itself is broke or not? (I suspect it is - horrible fuel consumption, can smell fuel quite strong when car is running, and cuts out when sitting in traffic on really hot days). I have a hand vacuum pump so could connect that to create a vacuum, but then what could I do? I suppose probably the only way is with a pressure gauge? I don't have one so was hoping to avoid if possible.. Cheers guys

Hey guys I'm after an SI board for my e30 dash as the lights and Rev gauge doesn't go..any out there locally or is ebay my best choice?

Do you know anywhere local I could get one? (For nardi)

Did it come with a horn keeper ring ?

Do boss kits vary much or would this one off eBay be all good? http://m.ebay.com/itm/181594240486?nav=SEARCH