323e30

Actually , i just checked the image and it does has wood grain door panels.

door cards are not included, from memory there not wood grain just leather, But i do have the woodgrain center console panel.

Bump. Only up to 23$ so far . These will be sold to highest bidder so someone is going to get a cheap deal.

Bump. Only up to 121$ so far These will sell to highest bidder, Auction ends tomorrow.

have a few left, Sent you a pm.

Do you make these yourself?

I have 2 strut bars left. suit e30. There adjustable, main bar is alloy, tower mounts are steel. they do hinge tho. Image shows what they look like. I havent listed them as they need small mods done as i had them made to order but they f**ked up on one of the tower mounts so only two holes line up properly and the third needs to be drilled. And the welds on the tower mounts arent so good and should really be redone as they were not done with Gas. I can have this arranged within the price of the bar tho. The guy that i dropped them off to originally to redo them took to long so im getting someone else to do it now There 140$ each (including needed mods and re weld) or 130$ without extra work. 15$ to post within north island. similar to image. can also get solid alloy ones, but not any time soon, Maby in 5 weeks or so. around 220$-245$ Also have 1 left for e36, (needs no mods) 132$ Same as image.

pair of brand new Alpina badges. roundels to suit e36 e34 e30 facelift . There the 83mm size both badges are the same. Hence not listing as to fit pfl e30, The e30 rear is different, These will fit the boot on an e30 but not perfect. will fit e34 e36 perfect and e30 facelift. 84$ for both including postage. no pick up. Will list for same price on trademe if no one shows interest.

e36 sides shown on e30s. My camera is crap but you get a rough idea. 60$ pair. there actually more black looking than images show, and there led so there is zero orange when there not on. also clear fronts, guess there more crystal than clear 70$ new pair

car had done 113kms so can only guess by that, not sure if they were original from factory or not. They have been sitting in my storage for around 4 years, There on trademe for 1$ reserve so highest bidder will own these. Had the front shocks aswel one was good, one was rusted through unfortunately. There also in the storage if anyone wants to get them serviced. (rusted through as in a pin hole blow out)

ive only got clear fronts for e30 at this stage, but yeah the guy on trademe is right, Even i couldnt find smoked side indicators, Thats why all my e30 projects have e36 smoked side repeaters.

quick image

Bilstien original e30 rear shocks, from a motorsport 323i 1$ reserve http://www.trademe.co.nz/Trade-Me-Motors/C...n-172106571.htm they have a little surface rust, nothing serious or on the actual moving parts so still moves freely with good pressure.

do you take trade ins? Ive been wanting to get rid of my 2000 c200 mercedes so I can get an e46 bmw

e34 leather interior CHEAP link here http://www.trademe.co.nz/Browse/Listing.aspx?id=172109963 has rear headrest that arnt shown in images aswel

e34 side skirts Cheap as. Link here. http://www.trademe.co.nz/Trade-Me-Motors/C...n-172108136.htm

Thats some pretty extensive body work you have done there, I reken most of it works so far except the "v8" letters in the grill. There a little too dominating on the front like that. imo. Will be cool to see this finished Keep us posted.

$200 for a set of 4 rims with wofable tyres. there from an e36 325i I brought them thinking they were four stud so have nothing to fit these on . there in pretty good condition, only a couple of minor marks , no cracks or dents or bends. If anyones interested pm me, or email me [email protected] will swap these for e30 sideskirts if anyones keen..

keen as. Been looking for springs that sit like your image in the rear for a while. If there not sold email me on [email protected] and ill get your details from there for payment etc.

Welding onto cast steel? sounds like its going to be a recipe for cracks.

Its an Nzd website so ild expect that they would be made to fit a right hand drive, guess the only way to find out is to email them and ask. That tubular "sex" one looks good, but in theory the driven performance one will give more power as all the cylinders Are closer to being Balanced (tuned) in comparison.

manifolds for turbo bmws available from driven performance really well made ones aswel and not too expensive considering the effort it takes to make your own one to fit in the engine bay. 400$ mark from memory maby less. They def had manifolds for m20 and m50 so they may do m30 aswel think its www.drivenperformance.co.nz otherwise google driven performance. Worked out it would be around 2500$+ plus to turbo an e30 m20 properly with low compression pistons so im going to custom fit a supercharger instead.

Im able to get fiberglass and bakelite full bodykits for almost any bmw, The kits themselves are cheap but the postage is ridiculous. If people were keen to do a bulk buy then I could arange them for a good price. I can get about 4 or 5 kits into a square meter (depending on kits,kits fitted within kits) Or Just 1 kit into a square meter. Via boat was around 700$ from memory per cubic meter.

Thats pretty much how i was wanting to do it, dont really want to use solenoids , its just another thing thats going to go wrong later down the track so plan to go with a mechanical option. just use like door lock pins to open the doors. Was there much pissing around to do it? or was it fairly strait forward.

angel eyes finally done and going, dammn slow process to get them to fit e30. I really cant see how they can advertise these to fit e30 on trademe, They need far too much work.. but still do-able i guess.