BM WORLD

are you saying that you and jason are 10 years old rematch anyday

have some .

notice the family of 5 or 6 out for a sunday drive

just put it in , it wont matter if they are not used.

happy birthday mate. have a good off .

call my mate brendan he has about 5 of them including a special 535iT 5spd model with M5 suspension ,brakes and body kit etc 021829032

alreay have plenty of cars to play with , this was just an extra we didn't need . wife uses a e36 328i touring as hack now . i still have my 328i coupe as my daily . and my e28 M535i/M5 track/fun car etc also have a couple of other project cars i want to sort out etc . E36 3L m3 , and a e34 544i or e36 344i 5spd etc

the old 635csi block doesn't have some mouting points on the block to mate up to your e34 engine mounts , so you will need to do some welding /fabricating etc, just the exhaust side i think . yes use all the e34 manifolds ,brackets , front hub ,wiring loom etc etc and just get a ecu from a e32 735i or e34 535i (can help with that if needed) the old 635csi engine ran a 10:1 compression ratio so a remap of the ecu will get the best out of that engine , otherwise you might get pinking etc . yes the same gearbox will fit to it with no problems . you will need to use the e34 sump and oil pick up etc.

and off she goes . happy new owner look out for it at the next track day etc

yes we have them , we can also do a scan on your car etc thanks brent call to arrange

M10- and M20 have different bellhousing shape . you will need to swap the bell housings over . but also check the drive shaft coupling out put . and also plugs , make sure they have the same electrical plugs etc . overwise wont work properly

call me if you would like to discuss .car will be coming soon.

i thought someone here was looking for late model 4.4L v8 M62B44TU vanos type . a little while ago just got one into work if you still need it. from a 2001 nz new 740i with 18" M parallels like in the picture

happy birthday big guy . you brought a new car yet????

i have a boot linner for sale for a e34

will most likly need a new thermostat

have owners manuals at work if needed , also many other parts . including a raicng dynamics front bumper

we hav e a short block if needed and can get rings ,gasgets ,bearings etc if needed.

its a getrag 250 , used in most e36 models . 316i 318i 318i 318ti 316ti 320i 323i 325i .( i believe maybe the 325i version is sleightly stronger ) only the 328i and 3L m3 use the ZF box , and maybe some NZ new 325i 320i etc

martys (BM weapon) turbo'd e28 535i 280kw at the wheels

have flywheel , coupling

do have motorsport opnes from coupes etc

check they havn't wired the high stop light across teh wrong wires. have seen that before

hi . we have a trans expert at european car parts. good guy he has been rebuilding auto's for years , we can do rebuilds , repairs , electronic diagnostic's , replecement second hand trans etc . all work with warranties etc come down with the car if you like . thanks brent

yes i have a set in my e36 coupe (didn't pay that sort of $$$ though), work well , also have some spare 6" adaptors if that helps you