Andre3000

Was holding on to this gear for a future project but time has come to move on, I have no time. For sale: - race prepped S50B30 (no FW) complete with intake, ecu, ews, e30 325 oil cooler. - e34 m50 sump kit - ZF S5D - e30 3.64 LSD K.Barrie extra clutch uprate med case - e36 3.15 open med case - brand new e36 mishimoto radiator This is an absolute goldmine for an e30 repower, I have extras like engine & trans mount bushings too, would love to sell the lot at once looking for $16k ono all of it, just want back what I spent over the years. Could break down and sell individually, dm offers.

Only rear panel trim for trunk, no floor mats, carpet is tidy, fade free (and blue). Flick me a dm offer if you're still interested, and please collect, if you want to remove it you'd save me time and you money 😉. Body is going to my mate to donor for his M325 ~ 18/12.

😭

Still in Akl yep. Gonna hold onto the maplight for a bit apologies guys, has me crying inside recounting my old M325. Tweeter housings were already on trademe, if they don't sell there I'll offer them to you Neil dibs. Not interested in removing all the powerflex, might split the lollipops but rear end has been sold complete and I'm keeping diff assy. Still looking for my other front seatbelt stalk euroriffic. If I can find would do the lot for 150 plus shipping if that's reso, dm me.

I'm parting out a long time project, sad but meh. Check out this and my other listings, all come with make an offer options. Wrecking Mtech 2 Coupe - GOODIES!! https://www.trademe.co.nz/3881782487 Still got a lump of spares, happy to offer old school prices to bimmersporters.

Flick me a q on my trademe listing or DM me. Have a manual box if you still need. I saw this listing you may be interested in: Wrecking Mtech 2 Coupe - GOODIES!! https://www.trademe.co.nz/3881782487

I saw this listing you may be interested in: BMW BUSINESS RADIO https://www.trademe.co.nz/3882874029

I have an e21 that was bound for my project workshop, but I've too many on the go at the moment. Which, TBH ,is really f**king disappointing, but I have to prioritise and be realistic here. I find it unlikely in my current circumstances that I will get time in the next 5 years to give this ol girl what she deserves, my e30 and 944 are ahead in the queue. So shes up for sale to the highest bidder and hopefully one of you can do her justice. The good: - Engine runs well. Have fitted an electric pump as the mech is leaking. New sae30 hi zinc oil and she purrs smoothly, no excessive tick. Cooling system seems to hold water ok but she will undoubtedly need a tune up and some preventative repairs done. - Fuel tank has been cleaned out and inspected, nice and tidy, fuel gauge working perfectly. - She drives under her own power, shifts, clutch, brakes (spongy as), lights, gauges, fan etc all work well. - Reg is NZ original and on hold with the OG black plate. - 4 speed manual with m10 carb and 135k on the clock. The bad: - Rust, she has rust in a bunch of it, none of which are major or difficult by themselves but the majority of time spent on this project will be body work. The key spots around roof, pillars, scuttle, chassis, underbody, rad support all look solid. - Driveline noise, suspect wheel bearings, or rear brake assy. - Standard shes been sitting for over a decade stuff. The ugly: - Look on your neighbours face as they foam with jealousy. There is also a set of dual stromberg carbs with an M10 manifold, and another 4 speed gearbox which I believe is an early 2002 4 speed complete with shifter assy. Both of which could be sold with the car or separately, I'm not phased. Car complete with gearbox and dual carbs: $3850 Car complete by itself: $2850 Gearbox: $900 Carburettors incl manifold: $750 Prices are negotiable. Contact me via email is preferred [email protected]

Bump

Bump

- M30 bellhousing, adapted to w58 - Tilton hydraulic release - Engine is a good donor, no work done, the lowish comp 9.5:1 M30B35 lend themselves to be turbo ready. I was going to build with arp studs and MLS, but that's your call on how much power you want. - Boost is running at gate pressure atm 13psi. No dyno just a tune from diy database, for a very similar setup m30.

Looking for: - e34 m50 sump, pickup & dipstick assy - Got one! Also - FL e36 328i driveshaft - 3.25 crown and pinion for my med case Lsd.

Is there any chance of reviving the pictures in this thread? Would be such a good resource for building my own.

Boost is fully controlled electrically via MSPNP2 ecu. Check the main photo bottom left shows vacuum line from manifold to solenoid (on firewall) and wastegate. https://www.diyautotune.com/product/megasquirtpnp-g2-b8793-for-the-87-92-bmw-e30-325i/ All ancillaries this package is bolt in and run. Steering pump included, hoses not. This engine is a non-A/C late e34.

It's a Turbonetics TO4B i'll check stamps tomorrow. Supposed to be able to bounce past 400 rear wheel ponies easily and much more with little modification. It's the torque that's the stupid part.. You will need help developing the right rubber and diff to get the power down. In terms of fitment I don't see why an e28 would be slimmer than an e30?

Looking for a set of Mtech2 skirts and pods for my coupe. Must be genuine plastic.

No turkeys here... The details are on my trademe listing: https://www.trademe.co.nz/2717902145 As always Bimmersport gets preferential rates if you hit me up here and win the auction I'll give you 10% off. I'll be adding photos and video tomorrow.

Bump

Thanks for the heads up dude. I got so disheartened by the recent BS of trying to buy the blue one LS6987 on trademe this weekend that I cannot be f**ked squabbling with idiots anymore. New plan is keep my baby which i do love dearly and ditch the ridiculous m30 turbo and chuck in a s50. Should keep it simple and easy, daily drivable and balanced. So if anyone wants a turnkey m30 turbo package: https://www.trademe.co.nz/2717902145 Get at me

I think i have one of these in the olds attic, flick me a pm if you're still looking.

Red one one tardeme looks great! Make sure you buy that one so I don't have to compete with you.

Yeah I've been keeping my fingers on the trademe pulse. That looks to be a lovely example, but i need the rumble of a 6 cylinder.

I'm looking to buy a decent condition E21 in as original as possible. Preferably with an m20 donk Definitely in manual Ideally a late 70's 323 Just fishing atm as I'm fairly sure I'm gonna sell my e30. If people are interested in swaps with cash my way for my e30 m30 turbo then get in touch.

Have had floating about for awhile now, intentions of fitting to my e30 but priorities have changed. This is brand new in box never been fitted with original install parts etc. $400 please

Wheels sold.