MoJoJoe

I guess it all comes down to how deep you are willing to reach into your pocket, SC14 makes a nice little straightforward exprement on the go, without going too deep. I have looked into the merc & mini blowers. but I like the toyota ones for their versility, availablity and fact you can get them for next to nothing these days.

I have thought about removing the AC and running it off the belt but I think there is just enough room to cram it in there once the air box is removed, just a slight modification to the manifolds are needed. Its been done before, here's how some one did the bracket. I'll PM you later to discuss things, if you got a one of our cars around I would be keen to work on building a bolt on setup for a fun little setup on the go. This one is off Gregs M3 (S50 engine very similar to the M50 and M52 as far as the mountings go), he sold the setup since and currently a guy in auckland has it(bought off trademe for under $500) for the whole thing and he wouldn't even sell it to me nor will he install it! bugger. https://www.youtube.com/watch?v=JjsEVwFR1_Y under 5 PSi, so no point of charge coolers really, might even add a draw back/lag imo. Most Sc14 setups I have seen seem to run them just as is with the stock pully, usually makes around 4 - 5PSI but the older Merc Ac pully can be swapped with the pully of the SC14 to make around 6-7PSI.

I have seen quite a few of those toyota blowers float around on here and trademe, but never came across any bracket designs to bolt one on M50/M52/S50 etc. Does anybody here have a lead for me or a design I could have to get the engneering house copy it? I know a few members here have toyed with them. So you must have something The SC14's will make around 4-5PSi from the stock pully, but I still wanted to give one a try since they have a magnatic 12V clutch that can be turned on and off using a switch, Would had been a lot of fun. There's a few SC14's on trademe right now eg. this http://www.trademe.co.nz/motors/car-parts-accessories/performance/carburation-induction/auction-755550561.htm So I wanted to snatch one and make it a weekends work, looks pretty straight forward.

The pictures dont do justice, trust me, if you install it properly its FLUSH as it can be. I have many happy customers, I have it on my own car too. here's some better pics, I have high res ones but the forum won't let me upload them (over 2mb) Try one, they may be a tiny bit more expensive then the chinease trademe/ebay crap but they are worth it. you wont regret them.

these things are aftermarket & pretty universal. you can use the existing holes on the lip to line it up and bolt it on, I understand not evey body wants to drill holes even under their bumper but here it is.... but my bumper too was aftermarket so I prefered to drill holes, its up to you really. but this is solid stuff and a bargain at the price, the splitters can be designed, molded, positioned and cut any way you wish. very versitile and universal,

you can if you like to but these are aftermarket and has holes every 1 inch so I drilled it as I saw fit, used nuts and bolts and came out much better then the flimsy factory stuff. take them, you wont be disappointed after a year of scarapping around. Will make for a great expriment. Looks good on E36's & E30's. May do well on E46 aswell!

Welcome to Dr. Jekyll's "Mojo HD Lips" sale.. Limited Quantity first come, first go.. (Post here for your place before you PM me..) These are made of 2/4" thick, STRONG yet flexible HD ABS meterial, Comes factory in 182cm piece (around 6 foot).OEM Black in colour to match your mouldings but can also be easily painted. They are installed using nuts and bolts, have predrilled holes on them and can be molded to fit any bumper, and not just limited to e36, e30 or even BMW's. On the e36 they are installed in two variations, Both M and Non M Variations of the installation are available below. Let the pictures do the talking... Non M Version M Version These are Made up of real hard stuff, it can only be cut, grinded or scraped, but it will almost never break. Unlike cheap ebay plastic lips and splitters that will break off or the sloppy rubber stuff and what have you in the market today in this price range. You can scrape this lip all you like, Mojo Tow Toe's life time guaranty, yes gentlemen, This is what you all have been waiting for..your bumper will happily break off, you will likely survive with an inch of your life, however the lip will never break off. The single best thing since wedding prenups, yes, this is Dr. Jekyll's Mojo HD LIP. You want it! I have it, get some mojo on your car. Asking $100 Shipped each to all BS members.

sold

$50 shipped. Going up on trademe if not sold by the end of weekend

whats your budget, will you be doing the work yourself? I have been quoted anywhre from $1200 - $1500 @ Auck...thats supposed to be the best conversion. I feel you though, Wish it was 1/3 of the costs.

the true sports model Rare model 2 dr wasn't the sports model equiped with an S after the 325i and it had a LSD and different suspension. its also an automatic. open to all offers I bet he takes 5K. my car is still much better.

Property is quite cheap where I am from. for like $200K you can get one of the biggest mansons (quadrople the size of anything in the west. With all the bells and whistles, while 50K - 100K is what you would need for a small student type apartment in Scandenevia. And ecconomy is also bad in Greece & Italy... I'm not too gredy, but I love the idea of turning 5M into 50M, I do have some savings but not sure how to make more out of what I got apart from buying and selling peanuts.

Will pm you today, need some help with the final cad files, I got a slight idea for the 3d print outs, so far I only got 2D no 3d guys I know..

i have some lips, HD lips they call them, can be made to fit anythign and come out looking great, I will list them later today with some pictures.

See, this is why I dont live in Auckland, its to help kiwis move to Australia. Remaining 4.797m Buy a little apartment in Scandenevia. Buy a small house in Italy and Greece. My own Harem with a wide range of Brides. Build an Mosque & an eastern Orthodox Church. Start a small Business to keep the Money Flowing. Buy a large Roman/Persian style villa in my country of origin. Buy an E36 M3 or the E92 M3 & Make it faster (Buy both if I'm feeling too Greddy). keep leading a lonley life as like Romanian Prince Dragul, as I too lack family to claim & belong to..... See why the plane ticket is essential?

Selling a pair of eye lids for e36. These are meant to cover the headlights only, not the side indicators. Montreal Blue Colour (quite close to maritious blue), easily repainted. Great condtion, came off a coupe but should be same for sedans, will pop into palce with black silicone adhesive or 3M tape. Asking $50 pick up @ Auckland or shipped at your expence.

Donate $200,000 to different Charaties. Give Away my 328is to a friend/bimmersport community. Give Away all my stuff (not much) for free... $3,000 one way plane ticket out of New Zealand...

he's like 6 foot tall =/ midget

anybody here good with cad? I got some small modifications before sendin them to the 3d print company. message her I will PM you some cad files.

i came here to see a e36 chasis turned into a lawn mower... nice car, pride of the south we so keept hearing about earlier this year huh? nice man....nice..oh wait is it from a retarded kiwi from new SOUTH wales? nice....nice man...real nice..

aaaaaaaaaaaaaaaaaaannnd its gone...sold! GO RED CAR! GO!

we all know the 323i IS the better option since its a e36 and a 6 cyl m52 motor at a fraction of the costs of an e30 or 318is.....and its Red... Buy it, Do it, Do it now!! buy mine? ...please?

really nice, only if mine had a sun roof, and a manual so how much did you end up buying this for if I may ask? How many K's on the motor? I may suggest getting some sport resonator and delete the cat and ad a remus muffler? or just get a full remus exhaust either wont sound that far off from what you are looking for. I guess some better headers would really be nice.

I might have somebody local wanting to view it this weekend, seems most people that contacted me so far are from up north if anybody else want it then go view it and grab the car, its really good. if this was Jan - March I know this car would go for 3K. but mid of year, bad timing to sell i guess.

1 pedel, you push it once to go, and you push it a second time to stop. its like future video games and hot chicks, you push 1 button to win,