adro

Awesome, works great. Thanks.

E30 got a new OEM antenna

Yeah, I spent about the same amount as what the MBI is for this car. Hindsight i probably should have just waited for the guides to fail but my OCD got the better of me...I do love a bit of preventative maintenance.

Yeah, was abit of a silver lining being forced to daily the E30 Catch up soon.

Thanks @rusteee, that catch can setup you had was nicely engineered. Have done about 300km since the overhaul and all seems to be well.

It's a Noelex 22, it's abit dunga but it's fun to race round the buoys at Evans bay when I can find some crew. Needs abit of TLC like the old cars ;-) Yes, that is a huge enlarger, in fact I think theres 3 huge englargers in there. Helped a friend re-locate them from the Raumati photo school out here to eastern suburbs.

Hi, I'm looking to return my E39 exhaust back to factory. It's had the 'scuba tank' deleted. I'm looking for the sport muffler which I think is the version that has the straight tip out the back, no dump pipe. Would need posted to Wellington. Anyone done the delete and have their old muffler lying round? Cheers, Adro.

Took it up to Auckland for Xmas and then over to Raglan for New Years and then back to Welly. Didn't miss a beat and got to stretch it’s legs. Stopped in and met @Lucan and picked up the roof racks he was selling a while back. Back down to Welly and gave the new snow foam lance a go Thought it was a gimmick but it's really good. At 208,000km I have just replaced: - Timing chain guides - Timing chain - Oil seperator (returned to OEM setup as PO had installed a catch can system) - Vanos Seals - Valley Pan - CCV - Water Pump - Thermostat - Coolant temp sensor - Engine mounts - Upper oil pan gasket - Lower oil pan gasket - Crank seal - Fuel Filter - Oil Filter - BMW coolant Thanks @Etwenty1 for hiring out his timing tool. Now that this is all done I will hopefully make it to the next Wellington Club meet. This ended up being a lot more time consuming than I thought and ended up having the car off the road for the last 7 weeks using spare hours here and there to get it done, learnt a lot and had to ask lots of questions from more mechanically minded mates but got there in the end. Here’s a few pics from my journey. I don't think I actually took a finished engine bay photo...but you get the idea. I do really regret not painting the rocker covers but I was pretty over it being in bits at this point...

actually yeah I think I'm confused with the RX's that I swapped with style 66's. My bad.

The want is strong. Sure you don't want to swap a staggered set of style 66 ET 10 with brand new rubber ;-)

Hiiiiiiii Seb, welcome to Bimmersport. Adding photos is a pain, I use flickr then copy the share link into the post. Catch you at a meet soon. A.

I have BBS RX 17” 8J 5 x 120 et10 came off my E39 540i tyres are toast. (1 puncture other 3 still inflated) missing 1 valve cap. $400 located in Wellington, happy to ship.

OK cool, thanks for the info @BreakMyWindow

Yeah, visually they look fine, and the tie rods, swaybar end links are all in perfect working order. But the thrust arm seems to move without alot of pressure applied to it. Now I have the bearings in I'll get an alignment and see if that makes a difference.

205,000 KM replaced front wheel bearings with OEM FAG 31221093427 with new bolts: Genuine BMW 31206779384 Old and the new The weird clicks/pops I was hearing when driving in and out of driveways or when the front was loaded up on the brakes coming to a stop have gone. The vibration at 100km has also reduced dramatically. Although while I was in there I noticed a lot of play in the thrust arm bushings so they will be next on the list. Finally used it for what I bought it for... Bit more work horsing

Thanks. Yeah man, You coming to the meet in Churton Park next weekend?

Powerhaus in Thorndon.

203,000 KM Finally got the rubber on the rims... OEM Msport style 66 wheels courtesy of @oldskool New tires: Potenza RE003 235/45/R17 Front and S001s 255/40/R17 on the rear. New Hella fog bulbs to match the now whiter headlights. New oil level sensor Oil change + filter New OEM window washer lines and pump....I never new how crucial window washer jets were until I didn't have them!

Got my MAF back from BAVREST in the states, looks as good as new. Hasn't made a huge difference as delving a little deeper I think it's my C191 plug that's causing me problems.

Little update. Got new headlights, decided I wanted it to look more modern so got some LED's Before: After A smoke test revealed a failed grommet in the back of the intake manifold, hopefully that is the reason it stalls when returning to idle. A scan revealed the airbag module is faulty along with the oil level sensor. Parts are on there way... Got an OEM tow bar complete with towing module from Ray. It's in, just need to extend the loom to make it to the LCM.

Hi Rob, I sent it here: http://www.bavrest.com/index.html @skidz said somewhere in Nelson could have done it also.....bit closer ;-)

Yeah still got the sub in the boot. Yeah I love it, just need to iron out a few gremlins...

Cool, glad its still in the bimmersport family. oh man......the receipts look like this thing has bleed people dry.

Thanks, yeah it's super worn! good spotting. I agree, anthracite headlining option is good.

I recently purchased @Aphexic's E39 540i. Overall it's in pretty good condition, with a tonne of service history dating back to 2009. This thing has had some money spent on it over the years. The car has just ticked over 200,000 km's. Here's some photos of it in it's new home. Things I'm intending to do as time and money allows: OEM Msport style 66 wheels (hurry up and post them @oldskool ? ) New tires: Potenza RE003 235/45/R17 Front and RE050A 255/40/R17 on the rear. Bulbs: Angel eye bulbs and H7 low beam bulbs Thermostat and coolant. Has had cooling system overhaul at 180,000 but thermostat seems to be all over the shop. Chain guides and timing chain + waterpump. Thrust arm bushings - has a strong vibration around 90+ km/h MAF - randomly when stopping at an intersection or lights it stalls and today it was hunting like it had a vacuume leak but then later on it idles perfectly. Tow bar Drivers door seal new water jet hoses