Hell BM - Forum Sponsor

[HELLBM 1560]

Hey Ray, just so you know I am still keen for the above, but money has been tight. I will likely contact you later this week or next week to sort out getting them done. If you still have the parts that is!

Ok

[Greg111 13]

Hey Ray, you wouldn't happen to have a L/R ABS speed sensor for a F/L E39 525?

Also the wheel guard for the R/F as pictured below:

Thanks.

Edited February 3, 2012 by Greg.

[HELLBM 1560]

Hey Ray, you wouldn't happen to have a L/R ABS speed sensor for a F/L E39 525?

Also the wheel guard for the R/F as pictured below:

Thanks.

Speed sensor yes. Wheel gaurd I used the only good one.

[Greg111 13]

Speed sensor yes. Wheel gaurd I used the only good one.

Ok great, i'll source the guard else where, what's the cost on the sensor?

Cheers.

[allan 295]

Greg you can get the lower liners new from pelican in the states cost me about $60NZ to do both on the 530i still have the old ones if interested. The sensor is available also $53.00 genuine and $23.25US for a brand Febi but you should be able to get a discount through Grays surely.

[Greg111 13]

Greg you can get the lower liners new from pelican in the states cost me about $60NZ to do both on the 530i still have the old ones if interested. The sensor is available also $53.00 genuine and $23.25US for a brand Febi but you should be able to get a discount through Grays surely.

You don't want to know what the sensor costs new, even my price, three figures, first figure doesn't start with 1, 2 or 3.

So second hand it is.

Ray, will PM you.

Edited February 4, 2012 by Greg.

[Zadkiel 41]

Hi Ray I emailed you about a bonnet strut for my E30 but no reply? I'm quite keen to get one as soon as possible.

Edited February 11, 2012 by Zadkiel

[JesseRaymond 0]

14 inch basket weaves ?

[Garryg 5]

Hi Ray,

Would you have a full set of black leather seats (front & back) for a 2001 e39?

Also, would you have any 19" mags/tyres to suit same?

How much?

Cheers

Edited April 4, 2012 by Garryg

[Apex 693]

14 inch basket weaves ?

Two sets here. Seller is a good sort too!

http://www.bimmersport.co.nz/forums/index....showtopic=39387

[m_power 0]

A big thank you to Ray from Hell BM for sorting out the vanos seals on the E46, to any guys considering this...DO IT! Makes it smoother, more peeper? is that the word and even though iv only done 100km since the economy meter is showing better consumption so all in all very happy with the results.

[smiddy 76]

For sure! Was at Rays, heard this car idling, smooth as! M52tu had most issues. Do it!

[JesseRaymond 0]

2 half shaft seal and a differential cover gasket for a e30 M10 318

[_ethrty-Andy_ 2136]

2 half shaft seal and a differential cover gasket for a e30 M10 318

buy new

[scottharvey 60]

How much for a starter motor for a e30 325i???

[tobester 9]

E34 540i brake calipers, front and back please?

[devinerentals 4]

Non vanos m62 4.4v8?

E39 front bumper?

[Dahen330Tahiti 0]

Hi ,

Do you sell a complete kit auto to manual conversion for my automatic E46 330CI 2003 (M54).

I'm from Tahiti, and a friend told me that you had send to him a M54B30 last year, so is it possible too for this conversion kit ? it's urgent !

thks for your reply

[HELLBM 1560]

Hi ,

Do you sell a complete kit auto to manual conversion for my automatic E46 330CI 2003 (M54).

I'm from Tahiti, and a friend told me that you had send to him a M54B30 last year, so is it possible too for this conversion kit ? it's urgent !

thks for your reply

Can help with what you want. Email me chassis no. [email protected]

Regards Ray

[E30Callum 1]

Hey there need a few things!

do you have e30 lsd diff? e30 facelift headlights? and front bumper ? also what are the prices if you have them? cheers

Thanks

[HELLBM 1560]

Hey there need a few things!

do you have e30 lsd diff? e30 facelift headlights? and front bumper ? also what are the prices if you have them? cheers

Thanks

Give me a call.

0212435526

[DoorMan 0]

Hi,

Do you have a rear drive flange hub for an e36 325? part number 33411093567 on the realoem website if that helps

[HELLBM 1560]

Hi,

Do you have a rear drive flange hub for an e36 325? part number 33411093567 on the realoem website if that helps

Can do. $30

[DoorMan 0]

Can do. $30

Excellent! Will require postage to Christchurch also. If you can let me know final price, I can deposit the money into your account tomorrow.

Thanks

[Knot 0]

I'm after an auto transmission crossmember for a 93 E34 525i (Jatco tranmission), Got one? How much? etc?

Thanks.