beemwr

Pmd interest

Which freight firms can do this economically? Waiting for my quote from Hookers, they brought one down from Akld -Palm Nth several years ago for $80.

PM'd

Cheers Brent, sending you a PM about a part for our 2002.

PM coming re.viewing arrangement.Cheers

Will send you a PM Andy on a possibility.

Hi Jason What model of e30? On a cautionary note an e30 320i may not take the medium casing without a mod. Best of luck in your search.Cheers

Pm'd

PM'D

PM'd

This one was probably assembled for the American market, apparently they didn't like the dogleg boxes. Bruce, Rose City, had (has) a M635i manual for some time too.

Thanks Geoff, do you have any LSD for the e30 too? Has a 3.43 LSD but not locking seems it might need something a bit taller though with the amount of torque available. I will contact you on the number provided.

Pm'd Will

Thanks for your experience and advice Will, (don't have a computer at home takes a few days to check in). We searched a local car-wreckers in the end, no e32 (or other known boosters that have been tried from doing a google search) but ended up with a Saab one; that connected up with the booster reversed into the left hand passenger footwell working good in braking response. Using standard e30 325i rotors and pads which faded quite dramatically). Going to try Resma pads ($60 a set) to counter the brake fade when tested on the track at the weekend past. I use them on our other track car having used the much dearer Feroda race pads which were recommended. Cheers

pm'd

Tried setting-up with-out a brake booster because there was a lack of clearance with the origunal e30 one. Have tried the Pedal Box set-up doesn't cut the mustard though, scary trying to slow and stop on demand. Needs to be a booster <100mm radius for clearance of inlet manifold. Is there a brake booster that can just slot in or with minimal modification?

Thanks Jon. I've P'med you.

Yeah thanks for your interest, e34 '89 m30 + Gargstic eng mounts into the e30. So headers/extractors (rhd) needed to join up to a side exit exhaust that previously housed an M10 set of extractors. Stock m30 manifold sits on steering column as is.

Seeking M30 Headers for an engine swap into an e30.

Did anyone get to see/drive or glean anything about this Evo?

We need a e36 radiator for our 1997 e36 316 now fitted with 318is motor.

We need an ECU #0261 200 175. These fuel and fire up the BMW m42 engine. They were fitted to the e30 318is and e36 318is 1991-96 I believe.

PM'd

hmmm...out of fuel...just shop some wood...guess the greenies wont be buying this anytime soon!!! It wasn't bought by a Bimmersporter either or it surely would have been posted on the Project Forum.