-
Content Count
3121 -
Joined
-
Last visited
-
Days Won
24
Content Type
Profiles
Forums
Gallery
Calendar
Store
Everything posted by Allanw
-
I'd like to fit the kit one day, But as I say, mine is perfect as far as the worn out parts go. I'll keep an eye on them. I wonder if mine was always leaking from new, and that's why the flaps wasn't worn at all - any time it did change, it would have done it slower and less abruptly. I wonder if the 2 cars have the same diff ratio. Some markets had different ones spec'd and sometimes "Motorsport" cars had shorter final drives to pep them up.
-
Run high octane (you probably are anyway) Have you checked the DISA valve. They can destroy engines anyway, so worth doing, but they can also tear membranes and not work, taking away a good wollop of low end torque. Looking at the engine from the front, it's just behind the throttle body, screwed (torx) inthe the right hand side of the intake. They're a pretty common failure, with a bit of milage on. Certainly worth looking at anyway, as if it comes apart, the pin in the end can get eaten by a cylinder = poked engine. You can get a kit online to repair them with cnc machined replacement components, or you can buy a replacement genuine item. If the vacuum side of things is poked, you have to buy a new valve anyway, but you can still update it if you want. Mine had a leak across the membrane, which I fixed and noticed a small increase in low end torque, although it was probably working to some degree with the leak. Usually, pulling them apart screws them completely, in typical BMW fashion! The actual mechanical parts were perfect though. DISA Valve check and repair kit
-
Laughed at that MANY times. Mods cost about $4K when new... uhhhh... $4K is NOTHING when it comes to mods on a brand new BMW... that didn't even buy leather seats as an option did it? Maybe the $4K was for a pod filter and some ghey spark plugs. Clearly it's a dead standard car with some crap added to make the owner feel important. I suppose it's not a 520i at least. Still. THey probably don't realise everyone is laughing at them. It's got some illegal HIDs added too.
-
Is that the better box to get? RealOEM lists S5D 250G Getrag for my car, but it's not known for being a stunning box. Also fitted to: E34: Details on E34 E34 520i Saloon, Europe E34 520i Touring, Europe E36: Details on E36 E36 320i Touring, Europe E36 320i Saloon, Europe E36 320i Coupé, Europe E36 320i Convertible, Europe E36 323i Saloon, Europe E36 323i Coupé, Europe E36 323i Convertible, Europe E36 323ti Compact, Europe E36 325i Saloon, Europe E36 325i Coupé, Europe E36 325i Convertible, Europe E39: Details on E39 E39 520i Touring, Europe E39 520i Saloon, Europe E39 523i Saloon, Europe E39 525i Saloon, Europe E46: Details on E46 E46 320Ci Coupé, Europe E46 320Ci Convertible, Europe E46 320i Touring, Europe E46 320i Saloon, Europe E46 323Ci Coupé, Europe E46 323Ci Convertible, Europe E46 323i Saloon, Europe E46 325Ci Coupé, Europe E46 325Ci Convertible, Europe E46 325i Touring, Europe E46 325i Saloon, Europe E46 325ti Compact, Europe Z3: Details on Z3 Z3 Z3 2.0 Roadster, Europe Z3 Z3 2.2i Roadster, Europe
-
If you know it's not your fault, ALWAYS call the cops. If you know it IS your fault, may be wise not to! There's money involved - people will lie. I had a lady hit me head-on on a country road. She admitted liability on site, and I had stopped when she hit me. She was running late for work, I STILL got to my appointment on time, AFTER sorting out accident details. I have photos of my work van and it's tyre prints less than 100mm from the bank on my side of the road. I have photos of her skid marks starting ON my side of the road at the apex of the corner, less than 1 metre from MY outside edge of the road, and my work insurance (LUMLEY INSURANCE - USELESS) said it was a narrow gravel road, and it was 50/50 blame. Even after I showed them the photos showing I could have driven a car (sideways!) around her car after our offset frontal impact. I tried calling the cops, but as it was I had to drive 20 minutes in a bent van to get coverage (remote bush area). So your tax dollars paid the $3000 excess because LUMLEY are useless - you see, either the other party paid the reapir cost, or the hospital I work at pys the excess. Who was more likely to pay anything????? I fought for 2 months, but it was all time wasting, and there was no cost to me. I declared the whole thing to AMI (my private insurance) who listed it as a no-fault accident in a work car and it makes no difference to me. If I could have gotten a cop to the scene (in VERY remote Northland) it would have been easy to claim the other party was 100% to blame. SO, unless you're happy to take the blame, GET THE COPS OUT to an accident.
-
HAHA! Awesome! Plus, you only find out the truth AFTER the cops come knocking on your door because she's actually an illegal russian immigrant called Boris who was actually the FATHER of the 3 kids, before the op. That car could have enough history for someone to have legal "issues" over. The shell could be stolen, the shell could have debts registered on it, anything. I was under the impression that changing the identity of a car was fraudulent. If the papers don't show the change, ANY current owner may be the one accused of the fraudulent activity. Run away. It's not worth the possible grief! It's not so different to buying it registered as a Mitsi V3000 - it's just less likely to be noticed.
-
Never mind
-
I've got a mate with E34 front calipers, completely rebuilt and replated and everything. I think he got them from a wrecker for his E39, had everything done (many hundreds of $$$) and then discovered at changeover time they were wrong. I think that's how it went anyway. Will PM you his number and you can call him and work out details etc, if he still has them.
-
Yep... I spied that one a few times, and it looks dodgy. I feel sorry for the poor bastard who buys it and has no clue about them. It's probably been re-registered at some stage with "plates and tags" from another car added. The car itself looks like a South African assembled one, anyway. RUN!
-
buy one! They're really cheap! You can buy This one on trademe for NZ$170 + NZ$8 shipping..... OR you can buy the SAME THING here, for under NZ$45 including the shipping I got mine here. Obvioulsy it may take a while to arrive - I think mine took a week or so.
-
+1 Agreed!
-
I'd probably take an E39 one if it's all models. I would normally be happy to organize, but new baby was due last Wednesday, so might be a bit busy any day now.
-
haha! There was a yellow one here in NZ. It went to the salt flats in Bonneville and threw a rod at 13500 rpm. It was fast too! We were on a club run and I saw it eat an XR6 falcon up a passing lane - especially when they got to the corners at the top Damn funny to watch! Haha, true. Still - it's not quite as hair-dresser as an MX5. 130 HP is REALLY easy, and pretty cheap. 180 is harder, but quite possible with a bit more cash.
-
Dads E30 325i 5 speed sits on about 11 to 12 L/100kms, and he drives like a grandad... what with him being one His driving is mostly shortish trips, either around the suburb, or 80 zone for 8kms to town, or hilly winding 8kms to my place and whatever mixture in between. A few longer drives here and there, but basically easy driving. It's mostly low throttle openings at less than 3000 rpm 90% of the time. Unless he's beside a honda with big wheels at the lights I think auto E30's are quite a lot hungrier too.
-
It's not all that far from you now - Masterton. They guy has 4 of them. You could paint it Yellow. Would that be hair dresser enough for you? They're very easy to make faster too
-
I had a WHOLE CAR that weighed about that much!: It wasn't the lightest one I had either!
-
Yeah, possible, although I don't usually check myself, unless it's a classic or something really special. I wonder if someone offered them good money for it and they sold it out of trademe, or if they suddenly realised it was a bit cheap. It was a pretty good price. It might appear next week for a couple of grand more.
-
Viscous coupling holding and spanner tools (sorted, thankyou)
Allanw replied to rusteee's topic in Want to buy
The drive belt will slip before anything bad happens. If you do it right, you shouldn't damage anything. If you miss with the hammer though.... it doesn't take much force, but the hammer blows have to be tidy and firm. If the spanner is too short, you'll be faffing about trying too hard to miss stuff with the hammer. it is a commonly used method. -
Viscous coupling holding and spanner tools (sorted, thankyou)
Allanw replied to rusteee's topic in Want to buy
I did it this way, easy - buy a nice long 32mm though. Mine is some old whitworth or somethig - fits great, but the hammer is AWFUL close to the fan shroud! -
Although... if they didn't mention it... no-one would know. You wonder why they have said all that, when the avaerage seller on trademe seems to be far less honest - like the genuine low milage E30's (with an odometer that hasn't changed for 8 years, but it seems to work now....)
-
You only really need to remove the top bleeder hose (under the plastic cover along the top of the radiator), because you need to remove the fan shroud. It's all prety easy really, certainly don't need to loose the coolant anyway. When was the water pump last done though??? All the belts (both actually) and the tensioners need regular replacing, the bearings can crap out and take the plastic puuleys out and break things you don't want broken.
-
I dunno if the infrared ones are more or not. Mine was just WAY cheaper from Milland, than the Auckland dealer I phoned. (plus the dealer told me I couldn't get another part I wanted, so Milland got me one all in BMW packaging and everything)
-
Car painter, wheel restorer and upholsterer needed
Allanw replied to jeffbebe's topic in General Discussion
Like this? -
Yeah, it's a shame they have issues. I wonder why they insist on a 2.0 bar cap too, when all the jappas are happy with 0.9 or 1.1's. Makes me glad I have the high OBC with the coolant level warning and overheat warning - makes it much harder for the Mrs to ignore! Pays to check the viscous fan too. By the time the gauge moves up from normal on these (especially the M54 powered ones) they're already too hot. The expansion tanks have been known to pop too. Jeez makes it sound like a money pit!
-
It was about $320-ish, inc. It was a RF Diamond key. I have two remote keys, but you can get a manual key (only really good for emergencies coz of the cheap-ass locks) for about $180 I think. Probably good to have a really good look. They're far from the most expensive keys, but it's still money that coul dbe spent of the cheap-ass cooling system or worn out suspension