tire

New or 2nd hand? I've got a spare cracked 885 head floating around full of valves.

Onya!

I was also under the impression that the only E30s with that round plug TPS were ones with switchable auto boxes. I have a spare flat 3 pin TPS if needed.

Bet he was enjoying himself though.

Aws

Hi, yes will bolt in and no I don't think they are stiffer. sold sold sold

Extractors on trademe Shocks on trademe ...both sold.

30k

Bump, $400 with broken thermostat housing.

How used are the control arm bushes? Are they eccentric like in the photo above? A real photo would be good.

The first cars I liked were E30s, so I bought one before I even had my learners.

I think I can do it Brett, what time have u got it booked in for at Glenns? Edit - come online on facey

VGC Monroe shocks also up - $70! See here.

HB Eddie. Give us an update on the 02

+1 to what everyone said, I'm not suprised it's provisionally sold already. Brand new mt2 wheel too!

Profile is wrong on these but its a start.

Call him - 09 268 9657.

What's wrong with your car peter?

Oh no! Thanks for all your help with mine. I look forward to seeing what comes next.

Bump, Wayney M20 headers $550.

Picked up my resurfaced clutch and PP from auto clutch, and my carbon kevlar faced clutch disk. Dropped gearbox off at Bavarian to have all the seals replaced and the output flange swapped. Met Gerry Hodges there who said I have a cool car Edit: Then my passenger elec window stopped working due to burnt out contacts in the switch . So I took them both apart and tidied them up. Now they work good.

Ooooh very exciting. Well done. Hopefully you have just made it cheaper for me too by giving him a base to work with..

Na going to Whiti right after the track bro, otherwise I would.

Nice results Brent. I discovered that what I thought was just a knackered clutch was actually a missing guibo bolt and a bunch of loose ones. Fixed that and pre-tensioned the center bearing while I was at it. Tightened up the drain bolt on the G240. The beauty of buying a half finished project car . Then went over the front suspension with a torque wrench. The passenger caliper mounting bolts were a little loose. Regreased the caliper sliders with elf copper grease. Had a poke around under the motor and everything was clean and dry so pretty stoked with that. Routed the ECU through the firewall. The hole took a little filing to get the plug through. Went over the car with lanocote to protect the vulnerabe areas on an E30. Filled er up with premium. All ready for Puke tomorrow!

Bump. OP changed. Thread recycling - save the planet.