petone

M3 front bar is smaller than your 325i front bar but only becuase it uses different mounting points so it has a larger effect. Could be wrong on this stuff but anyway...M3 is 14.5mm in the rear as well, so same size as M-tech, tourings (wagons) and maybe cabs also have bigger rear bars. I've got a 325i rear bar and standard bar in the front for my 4 cyl and its pretty nicely balanced. You can get whiteline bars from SAS, anyone had any experience with them?

Can you post up some pics of the exhaust from the turbo around the steering column (proper name escapes me), what diameter pipe is it? I'd be keen to come have a look when I'm home in a couple of weeks? Sounds sweet so far though.

Got them from powerflex directly. From memory we ordered 3 and got 30% off. Cost around $100NZ each landed.

Pretty standard for them to road test cars before and after alignments. Helps them to know what the car is doing, how the steering wheel is etc. Now, sorry to hi-jack the thread sort of but same original question but in Chch this time. Had bad experiences with the chain stores, would rather stick to the smaller independent shops. And my car is an a**hole to align so would rather have someone who isnt going to do a halfassed job.

HB dude

1300hp. madness. makes you wonder what sort of hp they would be making nowadays if they didn't have all the regulations (no FI) etc.

Good point but how do you meet up with them in the first place to ask them out? I try to avoid txt conversations: waste of time, too much is lost etc. One thing that gets me is when your in a room full of people and everyone is in there own little world txting away.

yeah its the c-pillar that kills it for me as well.

switches or relays could be faulty as well.

agreed, 3.91 is a bit too short for E30 325s. Does make them pretty quick tho, even hacked together POS with motronic + l-jet ECUs.

So how do they decide if a tire is too strectched for the rim? Manufacturers ratings or if the WOF man says its too streched?

For Ollie: http://www.bmwe30.net/cgi-bin/datacgi/data...&Section=02 and the check light in the dashboard means that one of the lights up in the roof is on. Its telling you that a taillight is out, engine oil is low etc. Could be an electrical fault, or something might need a top up. Dashboard lights are easy enough to replace, bit tricky figuring out how to get the instrument cluster unless you have a how-to or workshop manual.

Technically offset will change if you increase the outer lips. Depending on what front struts you have you may not need spacers. I have fit 17x7 ET38 on with no rubbing. But, you may also have problems with the wheel spokes hitting the brake caliper. What guard work are you planning on doing? eg any flares.

na auto ones are pretty slow. but yeah, any manual one will kill you.

even 16 x 9 are a bit of a squeeze and most guys can only run stretched 215's with them. will take a bit of work to get them to fit, and an offset of around 5, or probably less.

mine depends alot on the driving, between 7-8 on open road and as bad as 11 if its just driving round the corner to the supermarket and back. Not great economy really given lack of go, but it is getting pretty old now. (260km) I got better fuel economy before I put a CAI and exhaust on, dunno what that means regarding performance. 87 318i BTW

535i injectors? probably have to play around with fuel pressure or chip though.

same, I've seen a LHD 325es around. makes me wonder why someone would go to all that trouble.The was a 525iX on tardme a cuple of weeks ago.

for 7" wide rims you want around 20-25 offset. too high and the wheels will just sit too far in and not look right. go way to high and they will hit the strut or brake caliper. 16" wheels in 4 x 100 with 25 offset are bloody hard to come by, good luck finding a set. you can use spacers but i'm not sure on legal side of things for spacers.

yes, but will you be going the same speed with a modified engine?

z3 1.9 lever from $tealer, around $90 from memory. Can get z4 3.0 if you want to go shorter but wouldn't recomend it unless you got a good cond gbox.

HB princess

Your theory makes sense, maybe your rear sunroof drains are rusted and water is getting in through them? Are all your drains flowing properly? pour water down rear sunroof holes, front, sunroof holes, and down the vents under the windscreen (should come out under car and out through firewall by clutch master cylinder..

looking good, same as mine except 5 lug. I'm probably going with anthracite centers though, hopefully mine will turn out as good. Haven't done much on mine though, exam time and it been too farking cold. What finish did you end up with on the lips? clear coat, wax, nothing?