_ethrty-Andy_

correct they are in my hands! hope the post shop is open tomorrow otherwise will be sent first thing monday morning before i go to christchurch

come onnnnnn FedEx!! So close lol

put it in the van

Not really a for sale thread as such, but doesnt really fit anywhere else. Whatever but i am flying to christchurch empty handed on monday morning and roadtripping a car back up monday arvo/evening. if anyone has anything in wellington they would like brought down, more than happy to do it. can deliver anywhere in christchurch (would rather you met me though, i dont know the city at all) and north in the sounth island PM me Andy

Its been said more than once in this thread, please do not discuss the legalities or illegalities of these plates here in other news, Plates are in NZ, i should get them tomorrow which means they will be sent monday

confirm on the interwebs, but 99% sure you connect pin 7 on the diagnostic plug to ground. been a couple years since ive done it i am not responsible if it doesnt work/car goes kaboom

This _b for as much as being different and doing up a B20 is worth, i would rather the extra power, torque and future potential the extra 500cc would give?

where is all this talk of dry ice coming from or am i missing something? i thought it says to use a can of CO2?

mine was one of the first with a camera thought i was the sh*t with that phone, used to tell people i had a Hyundai, they werent so impressed when they found out it was my phone

payday bump!

is that all the way down with a coil taken out in the back???? my E30 on standard M springs is lower than that.... lol

well i havent ever driven on the black plate. but i think the rules are as long as the plate is on the front of the car its okay. no cop is ever going to think the white on black plate is legal lol. besides, if i got pulled over driving that car, the fake plates are going to be the least of the cops worries haha. the fact of no warrent/reg/cert are going to be more of an issue lol

every single time. and my cars arent even that low haha

yeah not quite sure whats up there. i had them sent and most people had recieved them by this time last GB :S ill make sure i get them out when i get them asap!!!!!!!!

does this count??? had the last of 4 or 5 cans of black paint i had to get rid of before i threw away the can hahaha

Right so car is for sale. the car im looking at was too much to resist lol. here are some pictures. should point out three things: 1/ car needs a wash, paint comes up really nice with a wash, im just sick today or i would have done it 2/ Will get spolier and cracked filler redone for the right price 3/ The headunit shown will not come with the car, i just put that one in out of the black car for now. found out the headunit that was in it used a Sony plug even though it wasnt Sony, who would have thunk. Would advise a view of the car to satisfy yourself. Am going to Taupo in the second week of January so can deliver as far as that then. Can pick you up from wellington airport for viewing etc will be listed on trademe if not enough interest here.

yes, just depends if its written in german or english

could go have a look if you like. PM me

look like standard bumpers and an SE steering wheel to me. only things tech2 about that car is the front valence and the spolier

dont need the dash, have a mint one here

ahh right. got that loom and its fine hasnt been messed with like the abortion of the other one. if you come across the other in your stash let me know

Okay so almost every wire on my dash loom is cut, spliced, reconnected, or left just chilling, and i can almost gaurentee this is to do with the temperamental running of my twincam. Its just a solder, twisted wires, packaging tape and no insulation nightmare The car has always been fairly temperamental, doing things like dying when you turn the headlights on, pressing the indicator stalk and the windows on the coresponding side going down.. random as sh*t like that. Have replaced relays, fuses, control units etc over the years, and there is now no question, its the loom. Doesnt help when i was making the problem worse probing around for feeds for EWS. I also thought that while im sorting out this wiring, i might as well tidy up all of the wiring on the car, so a few other things at the same time right now the background is out of the way, on to what i want to achieve: into the factory underdash loom, i need to connect up: Uniden Alarm GPS Alarm/tracker/scanner Radar Scanner Voltmeter gauge Stereo system Switches in the control lines for both subwoofers Switch for the Hella spotlights on the bumper Switch for the taillights (so they can be killed during day time, i like to drive with my headlights on, but no need for the tails as well, and it kills the effect of all black tails) Killswitch for power feed line going to amps and capacitors in the boot Tidy stereo wiring How i thought i would go about this is cut out all of the auxilary stuff currently installed (no pun intended), and then repair any wires on the factory loom that are damaged, and reconnect them using a solder and then INSULATE them. I will leave a feed from the ON, ACC and START positions on the ignition switch I then thought i would run a two power wires, one each for ON and ACC and switch these from a relay off the ignition feeds. this is so that it takes the strain off the ignition switch and onto its own fused power line to power all my auxillaries. havent thought as far ahead as the rest of it yet. baby steps. no before pics of the underdash loom sorry as the camera is dead, but just imagine your worst electrical nightmare x10.

does it have the rectangle plugs that click into the back of the cluster on it?

Need dash loom asap!!!!! please let me know what you have!? as standard and as tidy as possible. hit up pickapart and they are all almost as molested as mine. Are dash looms universal?? And do prefacelift body looms suit as long as they have power windows etc like mine does??

camera is on charge