Jump to content

B.M.W Ltd

Sponsors
  • Content Count

    1354
  • Joined

  • Last visited

  • Days Won

    34

Everything posted by B.M.W Ltd

  1. Reset / clear the fault code. With ignition on, tap the ABS module. If the light comes on with same fault code, it's the module
  2. B.M.W Ltd

    BBQ

    You don't have to smoke it Allan, but I do think it's better. You just have to make sure you either dry cure it or brine it properly. I prefer to dry cure my bacon. From research I've come up with my own recipe which family and friends like.
  3. Make sure you have it dialed in . Other wise you'll be needing a new clock spring
  4. B.M.W Ltd

    BBQ

    This is next in a couple of weeks time ? I last did this about 10 years ago. Will be doing it a bit more often now.
  5. Nothing wrong with that. Your more of a man admitting you are able to have other options when choosing a vehicle that suites your needs rather that just badge buying. Your wallet will like it ?
  6. B.M.W Ltd

    BBQ

    Can't go. My daughters doing her National Title Aerobatics competition over the North Shore
  7. Plugs & points with a feeler gauge ?
  8. B.M.W Ltd

    BBQ

    After 5hrs at 110c . The results......Cooked perfectly using my digital thermo. Results are fantastic... medium rare ?
  9. B.M.W Ltd

    BBQ

    I eat raw in the Merc...not really. have a great little BBQ
  10. B.M.W Ltd

    BBQ

    Smoking a marinated, aged, half rump steak today. I make my own marinades and rubs
  11. Yes you can Graham. But if there are signs of corrosion inside the housing I would use loctite master gasket
  12. A new / second hand switch unit is required
  13. I'm finding my Kona delivers the same experience... luv it ?
  14. No flow.. could be thermostat or water pump impeller. Have these items been replaced in the past ? Do you want to borrow my infra red thermo tester ?
  15. Bm Workshop Auck, CH CH and most Independent repairers
  16. B.M.W Ltd

    BBQ

    Just a heads up. If your looking at smokers, bypass the Bradley's & check out the advantages of the Polish Borniak range. If you are really into this you'll understand why after checking out all the specs. I'm really rapped with mine. Feel free to ask me why.
  17. Use a genuine oil filter as well
  18. If the motors knackered it wouldn't matter what you used, but that is the correct oil to use for this model of vehicle in good mechanical condition.
  19. The correct oil for a E46 330ci is any well branded full synthetic 5w30
  20. Brent's a nice guy, but my name is Glenn
  21. The M40 is still a much better and reliable motor than any of the NXX series 4 cylinders. My old E30 M40 did over 80k before I sold it after I rebuilt it when the previous owner broke the cambelt. The diesels N series 4 cylinder also give good service
×
×
  • Create New...