No name user

You got a good score on the 5 series

Sort of but you have to harden the shaft or extreme wear i also did one where i double stacked the gears

All the pumps have a major weak point, the shaft. I made mine from billet with a new drive system no spline

Nope, im still a "A" hole with a low tolerance to idiots, so just the same old me

Yep make your own, but now im showing off

Seems tad silly doing all this and leave the bottom end including bolts, but hey your build. As for failures, there was a Z3/4 running one in open bmw N/A that broke the bottom end many times including snapping Carillo rods. Your call

Cant say i like the bottom end theres no form of craddle, thus i made one and i see you didnt change the main bolts? #1 rule is the top is as only as good as the bottom.

i run over 11/1 on turbo eth setups, 9:5/1 is fine and will be also if you run pump 98 so dont stress 875 is way to small for eth try ID2000 they will also run fine on pump

That would be me then, they run a Pro35 on the RB30 and HRC40rs 66mm billet in the 2J

HX40R ?

Lets not forget your average BMW is tuned off one 02 sensor and does hundreds of thousands of km's without a issue, regardless of your requirements its still only as good as the tuner.

Ok answer this, what are you going to do with all this data and how are you going to make use of it ? I did a 80k twin turbo big block the other week, once tuned correctly we only monitor 02 readings per bank even then the owner has no idea what to do with the data. ( Cant hold his hand even time he uses it ) Just have it tuned right to start with using the intended fuel, there is no such thing as a "safe" tune however a tune is either right or wrong end of story. if you think you have time to watch a bunch of gauges when pedaling this thing then your streets ahead of anyone else i know, set within the ecu the limits and setup warning alarms for main parameters then drive the thing as intended. Monitoring EGT's per pot is a cool thing if you were after the absolute hp even then its questionable to whether its needed, plus EGT's chill off quickly once throttle is closed and slow to respond. Like i said tune it right to start with, no Knock and dont set it on the edge, go forth enjoy it as intended. I would cover the cooling thing but that seems to be covered above.

In light of that then you dont need my input

Do a google to understand how performance cooling systems work

Famous last words

Thicker radiators don't improve cooling they mask issues

Used them before, they sit on top of the block and locate within the cut out of the fibre head gasket

oh

Out of interest it that head gasket use the floating rings ?

S85 , not a cheap one i tell ya stil poor wee E36 is going to have heart attack when in the hole

Spent the day putting this back together after rebuilding the crank, all went well till i broke a ring....bugger

I think so tme auction 1108947957 Was just trying to be helpful pointing out to list under forsale as it would get more attention nothing more than being a GC

Oh really ? It is on your FB page, must be a mis print

If selling put it under Forsale