Lucan 196 Report post Posted September 8, 2011 Un-stitched the leather on my spare tech 1 wheel. DIY upholstery time! Quote Share this post Link to post Share on other sites
Michael. 2313 Report post Posted September 8, 2011 Connecting bits here and there. Yawn Quote Share this post Link to post Share on other sites
sp8s 1 Report post Posted September 11, 2011 Threw some lights in. Quote Share this post Link to post Share on other sites
sexy beast 0 Report post Posted September 12, 2011 (edited) Solved brake light warning...finally!!! Passenger side brake light - removed lens from car frame, realised bulb was blown, in the process of twisting out bulb holder, broke the holder on two bulb holders - so zoomed down to local bmw parts shop, got new holders, installed and tested - works now Driver side brake light - in the process of testing passenger side, realised driver side light was not working either, opened lens from car frame, realised water inside lens, drained out, took bulb out of holder - bulb ok, holder with pins rusted !!! - replaced pins from other side damaged holder after searching in the rubbish bin . used clear sealant (which i borrowed from dads garage )to seal rubber on lens which had come off so leaked water in. installed bulb/holder back. tested and all working fine. NO MORE BRAKE WARNING LIGHTS IN DASH... yippeee!!!! Edited September 12, 2011 by sexy beast Quote Share this post Link to post Share on other sites
thorburn 121 Report post Posted September 12, 2011 Stripped interior and started on cage Need to start working out as the hole saw gave me a beat down Quote Share this post Link to post Share on other sites
huff3r 347 Report post Posted September 12, 2011 Stripped interior and started on cage Need to start working out as the hole saw gave me a beat down At WINTEC? Hows that going? Quote Share this post Link to post Share on other sites
thorburn 121 Report post Posted September 12, 2011 Sure is. It's going really well. The course doesn't really deal with 'motorsport' as much as we'd all hoped and we seem to be running out of time coming up to the end. Can't really complain. The course has been well worth the money. How long did it take you to finish yours off? Quote Share this post Link to post Share on other sites
hybrid 1044 Report post Posted September 12, 2011 Bought set of Michelin pp2's for the 540. saved $700 on them so stoked with that got a wheel alignment as well now it drives even better than before. Quote Share this post Link to post Share on other sites
huff3r 347 Report post Posted September 12, 2011 Sure is. It's going really well. The course doesn't really deal with 'motorsport' as much as we'd all hoped and we seem to be running out of time coming up to the end. Can't really complain. The course has been well worth the money. How long did it take you to finish yours off? Yeah, it's not quite as involved with Motorsport as they advertise, it's more of a generic all-bases-covered mechanics/panelbeating course. Mine took several weeks from memory, but I got the hurry-up from Grant near the end. Managed to get it all done though, it's not too much work. Are you re-building the engine as well? I didn't as I couldnt afford to. Don't know anyone who wants a cheap project race-car do you? It's almost finished for the E30 series, and would be perfect for someone on the course to finish off. Quote Share this post Link to post Share on other sites
AN E30 Fan 1 Report post Posted September 12, 2011 Took it to Glenn's and had the Lower Ball Joints replaced and then went and got a WOF. Cheers Glenn! Quote Share this post Link to post Share on other sites
jasmit56 0 Report post Posted September 14, 2011 Put some predator aurion angel eyes in the E46.. Still waiting on the style 5's Quote Share this post Link to post Share on other sites
unstable 0 Report post Posted September 14, 2011 pulled the motor out. pulled the ABS out. put in BC gold coilovers. put in motorsport LSD. painted heaps of bits black. wired the loom for the 1uzfe! Quote Share this post Link to post Share on other sites
Michael. 2313 Report post Posted September 14, 2011 ^ Ooo a 1UZFE into what car sir? I haven't been doing much lately, it's been too cold to work on the V8. Plenty to do this Saturday & Sunday though. Quote Share this post Link to post Share on other sites
unstable 0 Report post Posted September 14, 2011 http://www.facebook.com/#!/media/set/?...0510&type=1 just for abit of fun mate, nothing too serious. Quote Share this post Link to post Share on other sites
Apex Effects 3 Report post Posted September 14, 2011 looked at it, smacked it on the ass. went back to work on the nissan Quote Share this post Link to post Share on other sites
Michael. 2313 Report post Posted September 14, 2011 http://www.facebook.com/#!/media/set/?...0510&type=1 just for abit of fun mate, nothing too serious. Fantastic. Shall go well! Quote Share this post Link to post Share on other sites
Lucan 196 Report post Posted September 14, 2011 http://www.facebook.com/#!/media/set/?...0510&type=1 just for abit of fun mate, nothing too serious. Looks good! Quote Share this post Link to post Share on other sites
polley 916 Report post Posted September 17, 2011 Today I tryed dyeing my interior using Dylon fabric dye from spotless - read about it on here I think awhile ago. On the pack it says it is not for use on polyester / synthetic fabrics which I think the E32 interior is, but I bought it anyway and thought I would give it ago since other people online have had success (prob using different dye). There was another brand there specifically for synthetic materials but they had no black - I have no desire to dye the interior of my car rain Forrest green. I started with the boot but the dye does not seem to be sticking to the fibers and is not very dark, seems to have made the boot carpet more blue / purple than anything - I suspect it wont last long and will prob wash out so I am going to re do it with VHT. Waste of $20 and an afternoon Ill grab some pics tomorrow when its dryed a bit more. Quote Share this post Link to post Share on other sites
APT 195 Report post Posted September 17, 2011 (edited) Just dye'd the e30 carpet with the VHT carpet spray paint from repco.. Used two cans works pretty well 25% off this weekend too Edited September 17, 2011 by APT Quote Share this post Link to post Share on other sites
5amchris 45 Report post Posted September 20, 2011 Went for a WOF Failed Booked in cert Quote Share this post Link to post Share on other sites
_Matt_ 42 Report post Posted September 20, 2011 painted wipers black, took wiper motor apart cleaned and re-greased. No more sticking half way every time the old grease was like tar haha. Quote Share this post Link to post Share on other sites
5amchris 45 Report post Posted September 21, 2011 Got a cert Put new headunit in Quote Share this post Link to post Share on other sites
kerry 10 Report post Posted October 1, 2011 drove the e30 for the first time in months. found a sebring dtm style rear muffler to put on it as well. Quote Share this post Link to post Share on other sites
_ethrty-Andy_ 2136 Report post Posted October 7, 2011 replaced front brake rotors did a skid to check if they would hold the car had a bourbon Quote Share this post Link to post Share on other sites
joshnz 2 Report post Posted October 9, 2011 (edited) Wash, clay, wash + wax = IMG_4150.CR2 by josh_richardson, on Flickr Edited October 9, 2011 by Josh_ Quote Share this post Link to post Share on other sites
