Silver Fox
-
Content Count
5702 -
Joined
-
Last visited
-
Days Won
2
Everything posted by Silver Fox
-
M20 Problem With Oil Pressure Spring Spring Thing?
Silver Fox replied to Jamez's topic in Maintenance
Or you've got an air block, ask Quicksilver about that? -
M40's fine, change oil and filter regularly. no problems. No tappets to worry about either.
-
M20 Problem With Oil Pressure Spring Spring Thing?
Silver Fox replied to Jamez's topic in Maintenance
Would guess it's your cam tensioner, 19 and 20 on this. -
Mainly the young and guilty, and most still haven't twigged?
-
Happy Birthday Tony.
-
The most common fault is under the intake manifold, where the 2 small hose pieces are. These perish and leak.
-
320 is 80 bore by 66 stroke, 325 is 84 by 77.
-
Started life as a 92 525i, but still the tits.
-
I reckon Martyn's on the phone already?
-
http://www.trademe.co.nz/Trade-Me-Motors/C...n-189970473.htm Got to be the best value on Tme at the moment, M5 for $15k?
-
Hammer's too small, needs to be much bigger.
-
Happy Birthday Paul, hope you have a good one.
-
Paid about $90 from supercheap from memory, used it heaps since.
-
pressed all mine out with a cheap press, easy.
-
Riley, you need the diff out of a E28 525e, usually 2.93, 3.07, or 3.25 med cases. Just change the output shafts and back cover and clutch pack and off you go.
-
Correct, you can change the clutch pack into any med case diff, need to get it set up tho and that's not cheap.
-
Go buy a lotto ticket, you've hopefully learnt something and it hasn't cost you anything.
-
Tools are easy to get thru Ebay, or you can make your own which work just the same. As Glenn says, it makes a big difference.
-
It has a little adjustment each way Graham. One tooth out equated to around 5 hp on our car. Makes a big difference, about 4 secs at Puke.
-
Have a few for me Gerald, hope you have a good one.
-
Have you dropped the trailing arms, the shocks and the shafts, also I had to remove the petrol tank hose where it goes into the tank, made it a bit easier? Should have plenty of room then, have done 4 or 5 that way now.
-
Been using one for 3 years now, very happy thanks Jono and Keith .
-
You would have been lucky even then to get $800 Ollie, my last set I bought about then cost me $400.
-
You did well Martyn, at that price maybe I should sell one of the sets I've got?
-
haven't I done well for you Martyn, past what I was willing to pay now tho, sorry.