Nobimmer

Yeah ideally looking at sea freight, it's all crap that she doesn't use and probably won't even use when she gets them there, she's just a hoarder... I see where I get it from. Yeah, my youngest brother who just finished school got offered to go live there with her but he doesn't want to because, wait for it, he's bought an e30 and doesn't want to sell it. Massive face palm. I'd have given a testicle to have had that oppurtunity when I was his age!

Have you scoped the triggers? Think josh has an old oscilloscope.

Yeah I don't need air freight, can take months to get there it's fine. I have sent stuff to America before (a block) and it cost $85 on a ship. I imagine there must be a cheap way to do it that takes a while.

Hello ladies My mum is moving to Sweden at the end of the year which is rad because when I go to visit her there will be heaps of lush Swedish chicks to look at. In the mean time she has a "mother's" worth of crap she has accumulated in her 50 odd years on this planet. Probably about a pallets worth of boxes of clothes, shoes, albums etc. Has anyone had any experiences good or bad with sending a pallet to Sweden or anywhere in Europe? She tried herself to find a way of doing it and the local courier quoted her over 1500$ for 3 day airmail which she thought was good - bless her. Any info would be appreciated Cheers Ash

Any skids?

Ahaha you are so scum

May be different for standard dme but on the link, the gap on the crank angle sensor was the difference between it being able to rev past 3k and not.. I had painted the timing cover with some 2k paint and clear and thought nothing of it. Sanded the 1mm of paint off and it was good as new. It was then getting trigger errors on the cam angle sensor after 6500rpm and that turned out to be interference in the wiring running back to ecu loom. Also the cam angle sensor we had to change to an earlier reluctor type to get it to work. Again probably different with standard dme.

Yeah James did you ever end up getting a wheel alignment? Or have you not been able to sell the motor in almost five years?

Is it the Hall effect one or resistors? I have a Hall effect one here off m52 brand new if you want to try. You'll need to splice some wires but it'll be nothing new to you now ha.

I have the communal bimmersport car trailer. Fits e30/6 and anything smaller. Single axle unbraked, tilt action beast. 24 beers a day to hire.

Skid or it didn't happen you mean will

Bring back sparkle and hi tower and watch bimmersport skyrocket in the ranks m

Got a couple sets, have only expired on the tag they have literally done two track days. Let me know next time you come by Auckland 021751262

Rip the booster out and push your foot down harder.

I do, and it's the communal bimmersport slut trailer.

Huge fan of the kit, better than tech 2 imo

That's why no one wants to do it.

Skid it. Or give it to sam to skid it!

Loooool checked your dizzy cap?

If you are serious, I'm sure one of our forum sponsors would look at doing it for you if you took your car there and payed them with money.

Hey mate I have a set of expired harnesses that I can't use any more and a spare momo corsa seat if they are any use to you, will make a massive difference.

Man that is so badass

That is fkn rad man

Rad

Koni shocks an eibach springs, shocks are valved to match spring rate.