e30ftw

You realise m325i's go for 12k + M3's are fetching 5x that

No under dash panel, one odd seat. Kit fitment is average. Dunno, not a 10k e30 IMO.

I actually just had mine apart this weekend replacing shift knuckle and carrier bush. It's close but there's still room to fit and remove it without removing the top half of the hoop.

No one is going to be able to tell you. Get yourself a multimeter and do some troubleshooting. Do the switches have lights on? Indication there is power to the switches? Power at the fuse? Power at the motors?

They are only made for IS and Mtech2. They would probably fit under an Mtech1, depends if the valance is the same sort of shape and width. I'm not doing them again anyway, but pretty sure garagistic sells the same ones.

Bump

The biggest reasons are wheels and Brakes. You can weld tabs on e30 struts and mount the sway bar like an M3. garagistic sells them. The hubs fit over a spindle on the struts, they are not the same between regular e30 and M3's or else it would be as simple as a hub/bearing swap. Struts are essentialy the same, with the upper tab for Sway bar. http://store.garagistic.com/e30-performance-parts/e30-2002-weld-on-tabs http://store.garagistic.com/E30-Adjustable-Front-Sway-Bar-Links

Mines just stock I think, It looks lower than most e30's I thought it might have M sport suspension being an SE. I only use it as my run around so haven't really tinkered with it. Not sure if it was me, I can't remember the last time I went down cobham, but I was over that way of town last weekend. I'd remember if I saw an e30 like yours though.

Had to check my driveway. Looks exactly like mine, but weaves not bottlecaps.

I already have 5mm spacers, don't want to use anything bigger. What do you have?

Looking for a set of 16's to use as track wheels, Anyone have anything that will fit over big brakes? I'm almost not too fussed about style if they are cheap but I may consider AC Schnitzers or Hartges if anyone has in 16's as I know they fit. E30 4x100 obviously.

You need to connect that 3 pin one, C104. Pretty sure the green wire is ECU Power. One of the others is Tach signal.

Being jetronic, does it have the 3 pin plug by the ECU plug? You shouid be able to bypass it quite easily, most of the time they are spliced into the ignition loom under the steering column.

This isn't the first time, at least in this instance the car was not crushed, most likely to attempt to recover unpaid fines. This will all be under the vehicle confiscation 3 strikes in 4 years for previous driving offences so there will definitely be more to the story. http://www.legislation.govt.nz/bill/government/2009/0042/latest/DLM2095708.html

After finally looking at it, I only just thought about how much fun that will be routing brake lines and the vacuum line in to where the booster will be lol, but it does look nice.

You may have the wrong one Stephen. Yes the push rod is shorter, you fit a spacer into the master cylinder. Just make sure it's the correct length. I have used Mk2 Golf ones always, not sure what year. Exactly the same as e30 though.

Well there is signage "uneven surface", it's more for awareness than anything. I'm sure if they didn't some numpty would manage to have a crash changing lanes over it and blame them for no warning. Not like they can out a couple hundred meters of cones to divide the lanes.

I went over that a couple days ago, to me it looks like because they resurfaced one side it's either higher or lower than the right lane. I'd say it's to avoid people changing lanes at 100kmh over a lip in the road.

Couldn't end up using these so they are sale. They are 2.5" in, 3" out. Rolled tips. Polished Stainless. 8" long. $70 shipped

Complain to the council. IIRC someone on here a while ago did when they broke their oil pan on a poorly repaired road and they paid in part to replace it.

There was one listed today on that BMW NZ Parts FB page, $600 Auckland

Nice, 3rd gear pull or skid? lol

Driveshaft Nah, but slave cylinder has to be the E36 one. It's alot different to the e30 one. The clutch and flywheel shouldn't be an issue, though the input shaft size may bet different (15mm vs 12mm), forget which has which but will pay to check the pilot bearing is the right size.

Well depends where you mount the engine really, you can read the lengths online on RealOEM, Just check it uses the larger diameter guibo and you will be able to use an e36 ZF or possibly some E46 driveshaft. I literally just used an e30 rear half and an E36 328i Auto (ZF) front half and it fit perfect. Yours sits more forward so you could check the manual driveshafts or atleast use a 328 auto shaft and extend the front section, it's quite fat.