BM WORLD

came across a scam for a plasma . and the guy has other electronic stuff at okish prices , and only email contact

just pick up a set of 6 sleightly used bridgestone RE55S 225/45-16: tyres to fit to my 16" by 8" bbs basket weaves on the e28 m535i . and also got some 17"by8" throwing stars with 235/45 tyres to use as road wheels.. just had the whole rear end tightened up too , new solid beer can bushes and diff mount in the rear subframe and some adj ones in the swing arms . new stiffer sway bars ,stiffened up the bilstein shocks etc . cant wait to try it all out . once i get the car back from being fixed (looks like the cluctch packed it in) a broken finger on the pressure plate or a spring fallen out of the clutch disc.

what about that 3L over bore kit with a m50 block and some of those nice S/S headers. and maybe a S/C thrown in for good luck thanks for the ride

+1 thats correct. std 5L v12 in 750i and 850i have 300hp 450nm

do through insurance , get a lock smith out . easy

what do you do to your car . have many e34's over the years real problems.

they are all broken wrecks

good work , i need to go for a drive in it soon. speaking of hairdresses cars , the gut that owns/works at drury auto services has a MX5 with a lexus v8 in it with auto.

yes good work glenn , very tidy setup . oh and thanks for the deal on the m5 clutch .

needs to be conected other wise you wil have a vaccuuum leak which will cause you engine to run lean at low rpm .also its needs to have a little restrictor in the tube to slow the airflow down past the sensor

the yellow tube goes to a temp sensor in the cabin above your foot . to measure inside air temp for teh heater/climate control . uses vaccuum from the engine to suck air past a light temp probe . to give a resistance reading to the climate control. hope this helps.

have some , in papakura though 021433600

http://www.turners.co.nz/Vehicles/Pages/Ve...amp;scrpage=sea

i thought so , but when i looked on the part numbers wern't listed .checked both vanos and non vanos , vanos engine is listed , non vanos teh part number is missing . i was pretty sure i had seen them when pulling engines apart . . thanks

have used diffs' r us in manukau a few times to fit lsd packs from other diffs , also swapping raitos around from older or newer diffs into the diff case i want . normally costs about $200 for fitting lsd , and a bit more for swapping cogs around

no ,only the vanos engines have them .they have 2 senors bolted to the inlet side of the block. http://bmwfans.info/original/E36/Lim/325i-...11/ill-11_1161/

last chance to get the 2.8L crank.... http://www.trademe.co.nz/Browse/Listing.aspx?id=208392689

325i is a more fun engine . more reliable ,m52 the ali block dont like getting hot at all . the vanos can cause issues if not had reg oil changes etc . not sure why people say m50 not as good . from my experience the m50 non vanos is the best of all the m50 type engines , simply 4 valve head with out all the crap that fails around it . have owned my 92 325i coupe now for about 3 or more years , havn't had to touch it , expcept for spark plugs and oil changes ,and i drive it properly too. get a 5spd manual if you can , then you wont have failing auto's etc . if you go a a m52 get the 328i has plenty of guts , the 323i is a bit gutless realy compaired to a 325i , why would you want a detunned engine???

2.8 or dont bother

got some prices for the screen today , boy i am glad its a insurance job $1400 just for a green screen , a bit less for a clear one.

yes , has the euro aerial type plug , so you will need adpators for those as well . have some if your in ak area , i am in papakura can show you 021433600

ethe tuner module is the third row back in the back left corner of the boot. its goes cd changer then amplifier then the tuner module . looks like a std car stereo but with no face plate or buttons . but i thought that these units could be switched over to NZ freq ??

what ever you buy , get one with the best lens , thats far more important than the number pixels. you can have all the pixels you want but if the image coming though the lens is $E&^%& then thats all it will capture ,a bigger size lens make a diffence.

i have one with no holes (from non electric window car), but you can make teh cut outs pretty easy . cheers brent in papakura 021433600