BM WORLD

there are some cheap e39 ones on TM . a lot of similier stuff in them

they all seam to pack up . even car i have stripped have had faulty ones , have a spare facev plate i think , also check the amp mounted in the boot (left side) they also give trouble have some of those too. 021433600 also might have one of the newer sony units that use teh same plugs etc .so cd stacker works .

i have some sedan ones . 2 sets . in papakur abut can send down 021433600 [email protected]

maybe around $2500

yes have some 021433600 papakura [email protected]

yes you need the face lift type of radiator (same as early e36 320i 325i etc)

might do a bon fire and throw some air bags in just for fun

yes had some like that on my hartge kitted e34 17" by 8"

yes was a lot of fun , especially watching marty (i was driving in front in his car) drive the car down to his place in drury from my place in papakura , and watching all the people check out this stripped down car drive down the road . this is what you do with a car once you have sold off most bits of value . have some fun with it . helmets strongly recomended (mainly beacuse of the big lawn mower fan cutting up all the weeds and flicking them back at your face) amazing how much quicker the car is with less weight

sorry not my car . i just had a photo of that car in my collection .but the wheel is the same

take a pic of teh pistons

yes maybe but you will need to get a new stacker cable (cant use the bmw one)and a older type alpine cd deck to match . or maybe a get a bmw speced cd player to work with the stacker .

my e28 M535i with m5 engine is getting upo there now , with all the upgrades i have done to it . but still cheaper than buying a e28 M5

i have a bucket full of cross memebers you can look at in papakura not far from where you got the gearbox from . also some of the gear shift mechs have the cable out the other side . V8 ones etc . 021433600 or check with marty he might have some others too.

whats that oil leak in the bottom of the picture

the non standard flywheel fitted doesn't work . engine has a miss the guy only half finished the conversion , when it got repo'd , previous owner owed money on it .

different types depending which engine you choose .179euros to 249euros http://www.300mm.de/motorhalter.htm http://www.300mm.de/typ4/typ4.html http://www.300mm.de/typ2/typ2.html http://www.300mm.de/typ1/typ1.html

sounds nice , where do you pick your ones up from?? i prefer beer battering mine. but can eat them raw . :puke: cheers

got a alloy wheel just like in the photo . might suit someone to keep as a spare or replace a bent one . good tyre . 16" by 7.5" ET27 with a 225/45-16" pirelli P700 tyre. no centre cap . $200 021433600

you mean they hammered it back with a big hammer

thanks .autoline (raceline) in mt wellington did the job for me . they are just a mix of bushes from what ever they have ,then they modify them to fit etc . the inside trailing arm ones are adjustable ,so you can adjust tow in etc . the car corners realy well now .

when you want to over take you have to stick the car so much more out over the centre line to see .

car is stripped down now . have pulled teh carpet out so if you want that to match then you can have it . have all the red trims bits as well to go , incl the screw caps that are red etc .

just had my e28 m5 engine one done by the guy in newlynn , very good results . M30 std flywheel for M535i was 10KG cut it down to 7.4KG e28 M5 runs a 7.5kg . the engine does feel more willing now . yes and also more rattles from teh gearbox now at low idle when its cold. had the flywheel lightend and balaanced with the clutch pressure plate . he said it was a conservative lightening . talking to auto clutch guy he reckons the crowd on the shore that do custom crome molly lighten flywheels work pretty good . less likly to wrap like metal clutch surface plate on the ali flywheels

no around 20 for 8" wide rim is fine ,. et38 is for e36 e46 etc