BM WORLD

just had my e28 m5 engine one done by the guy in newlynn , very good results . M30 std flywheel for M535i was 10KG cut it down to 7.4KG e28 M5 runs a 7.5kg . the engine does feel more willing now . yes and also more rattles from teh gearbox now at low idle when its cold. had the flywheel lightend and balaanced with the clutch pressure plate . he said it was a conservative lightening . talking to auto clutch guy he reckons the crowd on the shore that do custom crome molly lighten flywheels work pretty good . less likly to wrap like metal clutch surface plate on the ali flywheels

no around 20 for 8" wide rim is fine ,. et38 is for e36 e46 etc

i have grey mats and clips .also tow hook [email protected]

yes have those 021433600 [email protected] thanks

i have a nice 2.7L block that you could bolt on your 2L head . give the car a nice increase in power and torque . bolt on upgrade ...

grab them before they go . they look pretty good , http://www.trademe.co.nz/Browse/Listing.as...260&ed=true 021433600 this is very cheap for quality leather seats . can easily be re dyed black . i remember paying about $1200 a few years ago from a wrecker for a set of leather seats like these in black . so grab them now before they go.

it was an auto , now a 6 speed manual . its a repo car , half finished manual converison . clutch barely works , rough interior and ext. engine runs rough etc .

dont know . just as they came on the car .just need a bit of love and good pollish and paint etc but hey better than 15" with hub caps

yes the kit will fit no problems , just swap the bumpers for these ones . does your car already have the side skirts . if not then these just fit on . yes wheels are cheap . not mint but ok tyres about 50-70% tread

maybe i could buy it and swap interiors from my 325i coupe . and get it redyed black while it is out . whats the best deal you can do???

also have e34 540i types .

notice the doppy Q's at the bottom .

you just need to do the pedals , no need to swap the whole pedal box over

http://www.trademe.co.nz/Trade-Me-Motors/C...n-212661369.htm and local wrecker here in papakura will fit for about $500-700

what about m20b27 block . fit your head or another 2 or 2.5 L head to it .

dont know if any one has , but i do know that you will need to change the engine/trans loom as the plugs are different for the box and the trans ecu etc. would be easier to convert to manual . i have the parts.

close

6500rpm for the s38 in this year.

thanks . what do you mean by twin tuner , why do you need that . listen to 2 radio stations at once?? yes it is good though had nice sound etc . subs , amps , 6 cd etc .

and for my next job , sort out all these wires

thanks guys for the comments . was thinking of doing the centre part of the wheels in black can any one do a photoshop of it , to see what it would look like . or i can just take the centre caps off all together so they just have the black spokes . like these on the red car below

name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object> &"> name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object> &" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350" /> name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>&"> name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>&" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350" />

just fitted up the wheels today would some one be able to photoshop the wheel centres in black . just to see if it suits the car . thanks

i have a std radio tape unit (not the tv one) for sale . 021433600 [email protected]