skidz

$28 per can from Union Hardware...

Oh that is seriously nice!

as per title, need set of six M20B25 pistons in good order, preferably pre facelift. What have you got? Stephen 021 744 881

do you still have this engine?

I am familiar with the car and the owner, well built well presented and prepared car, and the owner is a decent guy.

Might be of interest to someone? https://www.ebay.com/itm/122858150809?rmvSB=true

Here's what you need (others can chip in if I have forgotten anything!) Manual Gearbox (240, 260, or 265) - make sure it has the M20 bellhousing Driveshaft to suit; Flywheel and clutch Clutch master cylinder and mounting bracket, slave cylinder, and flexi and metal lines Gearchange mechanism, gear lever, knob, and rubber boot Rear cross member for gearbox Manual pedalbox Remember to isolate or bypass the automatic park lock switch or the car will not start. (ie an automatic car will only start when the car is in park). Depending on budget you probably want to use as many new parts as you can, (Clutch, master and slave cylinders, gearbox mounts). Check the gear change bushings and get the kit to replace these - much easier when the gearbox is out. And, a short shift gear lever is always worthwhile. Good luck James Cheers...Stephen

i know someone with a trailer...

can do, 021 744 881 cheers Stephen

Measure it up and see if i will fit on mine. But I think E28 will be too big.

And it is the front half you need to shorten...

if it is 1984 it is more likely to be a 323 motorsport, a different car to M325i and worth much less - suggest you post some pics or get the rego.

First BMW and you choose an E39 M5? Drool. Welcome to the forum, Mossy

Hi there, I dont think I need another project, but I should at least come have a look.. Give me a call (next week) 021 744 881 Cheers...Stephen

So, Eli, we are all waiting to see this running!

Can do set M20B20 rods and pistons $100 Cheers...Stephen 021 744 881

What period of time, Toby? Weeks/Months/Years? I have a double garage in Johnsonville tenant uses one half but we may be able to change that

Very nice, Ray. Is that the one that was in Chch?

mmmm henna red E30, needs to be preserved as is.

Take the carpets out and take them to ChemDry - it is the only effective way to do it.

so why not test it on a steel bootlid?

Will have some available June

be even better if you told us what model car!

I can do an 885 head, complete, and in good order, for $450

welcome Ingrid - looks a tidy car