Jamez

looking good, cheers for the wheels the other day, one turned out to have a slight buckle but the tyre man said its very minimal and shouldn't be noticed if fitted to the rear. here's the project thread for the racecar i was telling you about, http://www.bimmersport.co.nz/forums/index....st&p=278849

changed from Telecom to xnet and have never looked back.

wooo

My dad has the habbit of braking really late, so late infact this one time the guy infront got out at the light's and went nuts, said my dad nearly crashed into the rear.

congrats

HB

that thing goes hard!

haha, power to weight always wins

I love when my girlfriend gets me new rims and I have nothing to give back (been together almost a year) maybe I could pick her up and take her to dinner, then goto a nice place overlooking Hamilton, then we can go back to the car and......admire the rims from the backseat.

When you love someone, And you love them with your heart, It never disappears When you're apart. And when you love someone And you've done all you can do, You set them free, And if that love was true.... When you love someone It will all come back to you oh wait wrong forum.

im thinking 20mm spacers so its at +24 whats a good tire size for 15x6.5's? I have a set of 205/55/15's but I have a feeling they will be to wide. also what saw cut's threw tire best as I cant stretch to spending $5 for someone else to take the bald ones off.

they are pretty narrow and don't have that much dish 15x6.5 4x114.3 +44 and there make name is "Volk Racing Super Fine Rim by Rays Engineering" 3 piece

I got some new wheels and one of them has got a small crack on the inside that has separated a little. 1.Is it repairable? 2.At what cost? 3.Where do i go? 4.Should I repaint the centers? thanks

oh snap.

press orgy front looks kinda like a nissan GTR

they welded the cage up to the front wells a few weeks after those pics were taken, then they welded in the strut tops to the cage.

haha, if its a 1/6th scale does it put out 1/6th of 365hp, as in 61hp?

car looks mint!

here's some build pics from 2 months ago, its come along way since then.

need 4 spacers to fit my new 4x114 wheels to my e30 hubs, need to be about a 15-20mm spacer

so im looking at brake options for the race car and since its got e36 hubs, thats what its got to fit Now I know that E36's and Holdens share the same wheels, but do they share similar brake's? do the rotors fit? do the calipers fit with relatively simple brackets? Just asking as these brakes on trademe are soooo tempting, 350mm rotors with 4pot calipers

Quick answer, It's way cheaper, almost free. I know that the e30 will suffer from the extra travel of having the BMC on the otherside of the car, I think a uk car mag found there is a delay of about 25mm from the pedal being pushed, just means you will have to press it a bit earlier

Tyres and rims came to a total $1500 all together, didn't cost that much at all when compared to the cost of new rims Cars still at the dyno, expecting to find out in a day or two if the Vanos has been fixed.

get it scanned by Glenn if you live near or in Auckland, he can determine the cause of most problems. edit- I taught i taw a puddy tat

Wheels and tyres Racing Dynamics RGQ 17x8.5 ET15 with Semi Slick's BBS RX 17x8 ET10 with Wets