_Matt_

what's the suspension setup and rim specs?

Must be at least 10, feels way quicker off the mark.

Added some BHP

That's all a bit extreme, boot button is in a plastic mould. Surey you can just pop that out somehow.

Got some new from pelican (non bmw) for my e28 bonnet, they are almost to good and need some wearing in.

i wouldn't bother with it, e21s show up every now and then and the ones i've seen in the last few months were all better than that.

It would cost $95 to bring 2 in from the states. This can also happen when running them on the E30

I have castrol vmx80 in my getrag 260 and 75-90 in my LSD. Shifts and drives great.

1.5 at the front and 2.5 at the rear I think.

Seems like the one that sat on trademe for a year or so for $25 000 might have been a decent deal. I haven't seen one since and that was about 4 years ago.

Half way through it, I much prefer the still shots anyway, I'll let you know in another 4 months when it's ready hahaha.

If you're selling a car for $77 000 get someone to take some decent bloody photos!

A few months since I got this up and running now, I had a few concerns like steam coming from the exhaust, overheating, coolant level dropping every time i drove it which only points to one thing right? well... - the steam was actually all the water I got in the exhaust pipes when i water blasted the engine bay. - it over heated because the system wasn't bled properly and the viscous clutch was only doing half a job, I replaced the clutch bled it about 3 times - the coolant level was dropping because it was escaping from the expansion tank because the cap wasn't sealing properly. Since I've fixed these things I haven't had any issues. Before and after Pic: please excuse the pod filter, I need to sand blast and paint the air box.

These took far to long to post, I took them last year before he sold it ?

yea, they could have mistakenly sent me something a bit more useful :/

I ordered a bunch of filters for the E28 and was sent these...useless to me. Anyone interested in them? http://www.trademe.co.nz/Browse/Listing.aspx?id=715303484 $15 each + p&p

An asking price is required as per forum rules.

Yea that's not right, that is dangerous slow.

290nm

Cheers for the help guys, I ended up renting one for $25. Just wanted to get it done ASAP.

Air intake to alternator? Shouldn't be a problem like that.

Need to replace my wheel bearing, need a 46mm socket. Any one in christchurch have one I could borrow? They are stupid expensive. Thanks in advance...

Polish those RS's please.

This is my E34 Hub, is it an asymmetric or symmetric hub? (need to replace the bearing)

Replaced a rear shock on the e34 let's hope I get a wof this time round.